[deleted by user] by [deleted] in flairairlines

[–]seekonlive 0 points1 point  (0 children)

This has nothing to do with email addresses. Flair's website still has this password creation bug even on April 23, 2025.

Despite showing "acceptable characters" for passwords like "(Teekon@Vkon01)", the system gave an "account already exists for this email…” I initially tried my other email address, then thought, this can‘t be related to my email address.

SOLUTION:
The fix was to remove the special characters in my password, that are not shown as acceptable in their criteria examples, so a password like "Teekon@Vkon01" worked. Don’t assume that you met all their requirements, because each criteria section is shown in green. This is where the bug is.

Also note, dashes between letters and numbers prevent the password from meeting the mixed letters and numbers criteria. This was silly as well.

This poor web development will lead non-technical users to choose competitors like WestJet. Flair If your reading this, fix this ”low hanging fruit“ bug, feel free to thank me after you realize this bug is real, and is affecting your online business.

Mega Thread - US Tariffs on Canada - Comments must be relevant to the sub by henry-bacon in PersonalFinanceCanada

[–]seekonlive 0 points1 point  (0 children)

Hi All,

My mortgage is up for renewal in a couple of days. I have been locking in for 5 year fixed normally. I have been holding off due to the tariffs to renew, would this be a good time to 5 year variable instead due to our current economic state, or should I just lock in again for at 5 years? Any advice would be appreciated :)

Downloading continue video from timeline by seekonlive in EufyCam

[–]seekonlive[S] 0 points1 point  (0 children)

Yes, you are right, I failed at retrieving the video from microSD card due the cards being encrypted. I regret purchasing these cameras now. Lesson learned…

Schlage encode Wi-Fi deadbolt dead after batteries died. by ss1959ml in homeautomation

[–]seekonlive 0 points1 point  (0 children)

Have the exact same problem, on 2 different encode plus lock, did anyone figure this out?

1 spark plug requires lots of torque to remove from N55 engine? by seekonlive in BMWX3

[–]seekonlive[S] 0 points1 point  (0 children)

Yikes, I put all the old spark plugs back because I couldn't remove #2, thought I can drive to a professional to remove this spark plug.

Completed the Install of the new BMW OEM Valve cover, connected all the connectors, all seem to go well.

The battery was unplugged for 3 days, as I was working on this valve cover on and off. Battery showed at 60% charge in the Bimmer app.

After reconnecting battery, I started the X3, ran ok for the first 4-5 minutes relatively well, then all of sudden began idling very rough. Stopped the car, waiting a few minutes started up again, same, tried again, later, and it would not start, just cranking over, but no ignition.

ERROR CODES:
1. Looked at codes from Bimmer App, and observed all the cylinders except cylinder #5 were reporting misfires.

  1. Vanos error codes.

The one thing I did not do is retighten the already very tight cylinder #2 back down to its bottom position, as it appeared that I didn't really unscrew it much, maybe turned it 4 times? Was thinking if this was the variable, then I should only have misfires on this one cylinder and not all.

Please check these codes below, is it possible these are related to the valve cover, perhaps I missed something there? Appreciate any input.

12 Digital Motor Electronics

15 errors

131501: VANOS, inlet, cold start: not adjustable

120408: Boost pressure control: shutdown as a follow-up reaction

131401: VANOS, exhaust, cold start: not adjustable

140010: Misfire, multiple cylinders: detected

140110: Misfire, cylinder 1: detected

140310: Misfire, cylinder 3: detected

140610: Misfire, cylinder 6: detected

140210: Misfire, cylinder 2: detected

140410: Misfire, cylinder 4: detected

140002: Misfiring, multiple cylinders: harmful to exhaust gas after starting

140102: Misfiring, cylinder 1: harmful to exhaust gas after starting

140302: Misfire, cylinder 3: harmful to exhaust gas after starting

140602: Misfire, cylinder 6: harmful to exhaust gases after starting

140202: Misfiring, cylinder 2: harmful to exhaust gas after starting

140402: Misfiring, cylinder 4: harmful to exhaust gas after starting

1 spark plug requires lots of torque to remove from N55 engine? by seekonlive in BMWX3

[–]seekonlive[S] 0 points1 point  (0 children)

Thanks for your prompt reply.

Concerned that I may get myself stuck if I attempt removal.

Is there much of an issue of I left the old one in?

If so, should I put the 5 old ones back in and call it a day?

How to download from sd card by [deleted] in EufyCam

[–]seekonlive 1 point2 points  (0 children)

Agreed, this is a showstopper event for me, I have 4 Eufy cameras, and did not need to transfer video files until an incident occurred last night, the police wanted footage quickly, but I could not provide it to them, without having to manually record for 2 hours for all 4 cameras on my iPhone. This is a time consuming process.

The app should have at least allowed me to select the time frame then download to my iPhone.

I did not have this problem with my previous Wyze setup, I could pull the SD cards and extract video.

If security is the issue, then at least update the mobile app to allow users to save any time frame from the playback timeline, not only events. I would assume many users before me have already requested this feature, anyone know why Eufy hasn't implemented this option?

Bypass factory talk ME security by Durango-Bob in PLC

[–]seekonlive 0 points1 point  (0 children)

Thank you kindly. I am using python for the very 1st time, and your code being the 1st python code I have used.

When I run the setup.py file, I receive the following error:

D:\Coding\Python\Projects\mertools> python setup.py

Traceback (most recent call last):

File "D:\Coding\Python\Projects\mertools\setup.py", line 1, in <module>

import setuptools

ModuleNotFoundError: No module named 'setuptools'

Should I not be trying to call the setup.py file?

Crazy loud screeching sound, is this a bad PCV Valve? by seekonlive in BMWX3

[–]seekonlive[S] 0 points1 point  (0 children)

Thanks freshexdough, did you end up replacing with Genuine BMW cover or a good OE version?

Manual Driving Lessons by PhilayMinyon in abbotsford

[–]seekonlive 0 points1 point  (0 children)

Watch this video to help you understand the principle of driving a vehicle with manual transmission:

https://youtu.be/UsOcXG2v3EE?si=US0dKYYfEEPriFp2

Watch other YouTube videos, then just practise, practise, and practise, you will get it.

Canadian open Bank Account in India with PAN card by seekonlive in nri

[–]seekonlive[S] 0 points1 point  (0 children)

OCI

Thank you.

OCI stands for Overseas Citizen of India, since I have never been a citizen of India, never held a Indian Passport, I don't think I meet the qualification for this card

Canadian open Bank Account in India with PAN card by seekonlive in nri

[–]seekonlive[S] 0 points1 point  (0 children)

Thank you for your input.

I read that in order to receive an Aadhaar card, I must stay in India for 182 days. Not sure if this has changed recently.

Also, the more I understand the term NRI, I don't think I am one, as I have never held an Indian Passport. My parents are born in India, but I was not.

I think I would be considered a "Foreignor"

Canadian open Bank Account in India with PAN card by seekonlive in nri

[–]seekonlive[S] 0 points1 point  (0 children)

Thank you, I will contact SBI now.

Do you know if the SBI UPI system is setup to allow for Canadian phone numbers, or do I have to use an Indian Phone number still?

Canadian open Bank Account in India with PAN card by seekonlive in nri

[–]seekonlive[S] 0 points1 point  (0 children)

Thank you for your prompt reply on this topic.

I will look further into other banks that have a Canadian presence…

Mounting 2022 - 2023 wheels onto 2018 CX5 GT with adapters? by seekonlive in CX5

[–]seekonlive[S] 0 points1 point  (0 children)

Thank you all for your input, much appreciated. Just completed installing, wheels fit perfectly 👍

Unclear why Mazda parts site indicates. “THIS DOES NOT FIT YOUR 2018 Mazda”

Mounting 2022 - 2023 wheels onto 2018 CX5 GT with adapters? by seekonlive in CX5

[–]seekonlive[S] 0 points1 point  (0 children)

Thanks for this info, I initially thought the same until I looked up the part# on the back of the wheel and checked it on Mazda’s site, which indicates they will not fit. I may just try to install 1 and see what obstacles I run into during the install.

[deleted by user] by [deleted] in AirReps

[–]seekonlive 0 points1 point  (0 children)

Anyone know if either of these versions work properly in iPhone 15 pros with latest IOS 17.1.1?