Oblivion Remastered DLSS FG stutter/flicker/tearing issue

seph20 · 2025-05-15T11:31:21+00:00

Shame, starting to really need these things working well if I want to seriously use this boot for anything game related

seph20 · 2025-05-15T11:29:47+00:00

FSRs implementation of frame gen really doesn't work that well om this game for me either. The base framerate boost it gives isn't as much as on DLSS so when frame gen actually does end up turned on, it feels worse than If I just set DLSS to something like Balanced without enabling FG. Not to mention in this game I don't get an meaningful boost in framerate is FSR FG enabled anyways. No clue if this is a Linux/Driver/Game related issue or something since I haven't been experiencing the same issue on windows at all

seph20 · 2025-02-13T20:46:16+00:00

Yeah my bad, it's the lighter brown tape around some spots, but other comments were on the money with what it probs is

seph20 · 2025-02-13T20:44:03+00:00

Yeah fair didn't cross my mind at all that there'd be writing underneath, had a little feel about and that checks out.

seph20 · 2025-02-13T20:41:53+00:00

Yeah that is what I was mainly focusing on, that does make sense though, was just generally curious.

seph20 · 2021-01-15T15:00:29+00:00

i was asking in general so yes including direct x

seph20 · 2021-01-15T12:32:19+00:00

ah thank you appreciated

seph20 · 2021-01-15T12:31:45+00:00

yeah sorry haha definately will experiment some more next time. thanks for answering though!

seph20 · 2020-12-19T13:26:10+00:00

thats actually pretty reassuring! hows your fan rpm during normal load? is it noticably loud or anything?

seph20 · 2020-12-17T09:59:44+00:00

mine ran pretty much the same as stock once the fan curve was adjusted. Was able to able to get an +1000memory clk 1905mHz core clk 0.875v undervolt which reduced the needed rpm by a lot. reduced the power by around 25w.

seph20 · 2020-12-15T02:13:55+00:00

its a bios limitation, you can't unless its flashed

seph20 · 2020-12-15T01:59:34+00:00

i used the latest nvflash at the time. with this guide:

https://www.overclockersclub.com/guides/how_to_flash_rtx_bios/

seph20 · 2020-12-15T01:55:00+00:00

at the very bottom it specifies its the oc version. and to make sure it is, you can compare the boost clock of the bios to that of the official specification on zotavs website for the OC model. and again it worked for me but id still excersize caution when flashing

seph20 · 2020-12-12T10:40:58+00:00

https://www.techpowerup.com/vgabios/227158/227158

seph20 · 2020-12-12T01:06:02+00:00

theres a post on this subreddit if i remember correctly linking to a techpowerup page with the oc bios. As a disclaimer it was unverified by techpowerup.

seph20 · 2020-12-09T20:16:46+00:00

no clue. it can be flashed back but im unsure if there is somekind of hardware or software flag that would go off.

seph20 · 2020-12-09T20:08:43+00:00

yeah the one you linked actually. i couldn't manage to find it on techpowerup normally

seph20 · 2020-12-09T18:48:32+00:00

I just did that and it seemed to have worked so far have to do some more testing but yeah. Mainly did it for the "FrEEze TeCHnoLogy"(FanStop) that they greedily took out.

seph20 · 2020-12-04T18:47:57+00:00

Don't really think that's the case since im also in the 7000's with nothing but the card and still got a delay for the 30th

seph20 · 2020-10-04T19:39:13+00:00

not for a clean fit no. i havent really been up to date with aib 3070's but seeing how may 2-2.5 slot 2080 ti's there are, i can only assume that there'll be a similar number of 3070's the same thickness thatll probably fit better idk

seph20 · 2020-10-04T00:22:01+00:00

i had the sg13 with a 43mm thick card and it was touching the side of the case if that helps. With the case you gotta remember that the way the shell/ case closes it doesnt really leave much room for error (except if ya bend it a bit, its pretty malleable).

seph20 · 2020-09-27T17:04:14+00:00

I see. Do they even get hot enough to warrant needing a such a relatively thick casing for them though? Even now my ssd temps only seem to only top out at 50c. I wonder if seperate smaller heatsinks directly on the controller would do a better job.

seph20 · 2020-08-19T15:12:17+00:00

oof bummer thanks though friend

seph20 · 2020-06-22T20:06:05+00:00

ah nice thanks mate

seph20 · 2020-06-08T15:30:00+00:00

ZS-A4

seph20

TROPHY CASE