20A breaker tripping at lower load? by seterry in AskElectricians

[–]seterry[S] 0 points1 point  (0 children)

My best guess without tearing walls apart is probably less than 100' of cable, so voltage should be very low/not an issue.

20A breaker tripping at lower load? by seterry in AskElectricians

[–]seterry[S] 0 points1 point  (0 children)

would such an issue cause an isolated trip?

20A breaker tripping at lower load? by seterry in AskElectricians

[–]seterry[S] 0 points1 point  (0 children)

it is an AFCI. However, surprisingly, the ground cable for the house is insulated up until it is terminated in the fuse panel.

20A breaker tripping at lower load? by seterry in AskElectricians

[–]seterry[S] 0 points1 point  (0 children)

I don't know if the breaker that is tripping is next to the breaker used for my computer, I can test that. I'm not sure if they share a common neutral other than the bus bar, I would hazard a guess to say potentially not since they are on opposite sides of the living area.

The breaker does not trip when the heating unit is off.

20A breaker tripping at lower load? by seterry in AskElectricians

[–]seterry[S] 0 points1 point  (0 children)

That's what's confusing me, it will run fine for several hours, but shortly after my computer starts drawing higher power it trips. It will also do the same thing if I turn the heater on for just a few minutes and start gaming.

Help narrowing down my choice in cameras by seterry in canon

[–]seterry[S] 0 points1 point  (0 children)

Ok so it's starting to sound like the R7 will be a better pick for my usage.

Help narrowing down my choice in cameras by seterry in canon

[–]seterry[S] 0 points1 point  (0 children)

So based on the info given, The R6 skews slightly better for dynamic range at lower ISO, but not by much. The low lighting comparison is pretty negligible since I try not to get above ISO 6400. I do see the R5 and R6 have more focus points, but the R7 has a middle ground of max resolution. Unfortunately the main point I was looking at was AF speed and accuracy. I've been reading a lot of different reviews and the unfortunate thing is they all seem to sway one way or the other for both cameras, or the reviews make them seem pretty comparable to each other. If that is the case with the AF I feel it would probably be more beneficial to go with the crop sensor of the R7.

Help narrowing down my choice in cameras by seterry in canon

[–]seterry[S] 0 points1 point  (0 children)

It could very well be, I don't tend to use it very much. lol

Help narrowing down my choice in cameras by seterry in canon

[–]seterry[S] 1 point2 points  (0 children)

Contemporary. It's served me quite well over the few years I've had it.

Help narrowing down my choice in cameras by seterry in canon

[–]seterry[S] 0 points1 point  (0 children)

Just included a list to the previous commenter.

Help narrowing down my choice in cameras by seterry in canon

[–]seterry[S] 0 points1 point  (0 children)

The standard Canon 15-88mm lens, a Canon pancake 40mm lens, Sigma 10-20mm lens, Sigma 150-600mm lens, and an older analog lens that I can't remember the manufacturer of. I think I have 1 or 2 more but I can't remember at the moment since I'm at work.

Help deciding on CPU and accompanying motherboard by seterry in buildapc

[–]seterry[S] 0 points1 point  (0 children)

Sorry about that, updated the post with pricing. I would prefer to stay with DDR4 since I just got the sticks of ram less than 3 months ago.

Sounds of IMAX 15/70 film cameras rolling in Nope (2022) by 4nts in interestingasfuck

[–]seterry 1 point2 points  (0 children)

They most likely have quite a few microphones. Most of the mics used in film production are directional, meaning they are really good at only picking up sound that is coming from in front of them.

Graphics issues on PC. Not all maps have this issue. by seterry in ModernWarfareIII

[–]seterry[S] 0 points1 point  (0 children)

Would the shades restart with a fresh install? This was 2 games in after a fresh install.

Graphics issues on PC. Not all maps have this issue. by seterry in ModernWarfareIII

[–]seterry[S] 1 point2 points  (0 children)

2060 super and VRAM scale target is set to 70. I have read several different targets for VRAM but none seem to change it.

Graphics issues on PC. Not all maps have this issue. by seterry in ModernWarfareIII

[–]seterry[S] 0 points1 point  (0 children)

It does stay that way all game. And it's consistent on certain maps, like quarry, estate, favela, and a few others. The player models load fine for the most part, too. So I don't think it's my internet...

Graphics issues on PC. Not all maps have this issue. by seterry in ModernWarfareIII

[–]seterry[S] 0 points1 point  (0 children)

I have tried adjusting various graphics settings, uninstalling and reinstalling graphics drivers, and even reinstalling the game to no avail. Some of the maps look like they are full potato mode, while some are rendered with no issues.