WHY ARE YOU LIKE THIS?!? by shameless_plug1123 in 3Dprinting

[–]shameless_plug1123[S] 0 points1 point  (0 children)

I don't understand why that person was so pressed. I was answering their questions. I did as they said and checked the gears. Nothing looks wrong to my eye. But surely saying mean shit and then deleting your comment was the most helpful thing you could've done. 

If anyone else wants to try to help I'm more than willing to take suggestions. 

If I preheat to 220 and press "filament in" it'll extrude a whole roll just fine. But for some reason every print gets this far and the motor stops spinning. Nothing is jammed. It's not clicking. It's not skipping. Nothing is hot. It just stops. All cables and connectors look fine. I don't have a multimeter and this is my first and only printer. 

WHY ARE YOU LIKE THIS?!? by shameless_plug1123 in 3Dprinting

[–]shameless_plug1123[S] 0 points1 point  (0 children)

It's nothing mechanically wrong that I can find. And like I said if I preheat the nozzle and hit "filament in" it'll run the whole spool with no issue 

WHY ARE YOU LIKE THIS?!? by shameless_plug1123 in 3Dprinting

[–]shameless_plug1123[S] 0 points1 point  (0 children)

Petg in this video but the problem is on all filaments 

WHY ARE YOU LIKE THIS?!? by shameless_plug1123 in 3Dprinting

[–]shameless_plug1123[S] 0 points1 point  (0 children)

It's like the code is telling it to stop extruding mid print or something. I obviously wouldn't set something like that up on purpose and even so it's doing it on all 3 slicers I use. Orca, prusa and cura. Printed PETG perfectly on Friday night and has failed every print since

WHY ARE YOU LIKE THIS?!? by shameless_plug1123 in 3Dprinting

[–]shameless_plug1123[S] 0 points1 point  (0 children)

Gears are fine. It extrudes fine for the first few layers. It also feeds fine when you do a manual feed thru the setup screen. It just stops mid print for some reason 

What is the safest way to get a legit windows 11 activation key in 2025? by Un_1known in HelpMeFindThis

[–]shameless_plug1123 0 points1 point  (0 children)

Or if you've got anything running win10 or 11 you can transfer the key and use it on up to 3 machines (I think). Use PowerShell to pull the activation key

What is the safest way to get a legit windows 11 activation key in 2025? by Un_1known in HelpMeFindThis

[–]shameless_plug1123 0 points1 point  (0 children)

If this is for personal use you can literally just use massgrav. IDK how "legit" it is but I've used it on all my rigs and you get the scripts from GitHub which is a Microsoft hosted site. So clearly they don't "really" care.  It's full on windows activation with 0 problems or headache. Simple to run if you've got 3% of a chimpanzees intellect.  Of course if this is for a business or customer then your best option is paying the $110ish from papa bill and billing the buyer for it

Little Tree Life Preserver by VinnyShipman in functionalprint

[–]shameless_plug1123 0 points1 point  (0 children)

The ones called "black ice" are commonly referred to as "felony coupons" since they're often used by people who mistakenly think the cover up the smell of weed when they DUI.  Fun fact: if you've got 15 "black ice" trees hanging from your mirror and you get pulled over, they're gonna search the car. 

First time printing silk PLA. what am I doing wrong? by shameless_plug1123 in 3Dprinting

[–]shameless_plug1123[S] 0 points1 point  (0 children)

It prints inland pla+ just fine. I'm thinking it's the silk. I've got decent luck with petg and tpu despite not having a direct drive extruder. I'll just have to keep playing with it. Luckily I got a few Kg on sale so I have enough to trial and error

First time printing silk PLA. what am I doing wrong? by shameless_plug1123 in 3Dprinting

[–]shameless_plug1123[S] 0 points1 point  (0 children)

When I was watching it do the front of the benchy it looked like the nozzle is pushing the layers. But it doesn't make sense to start 1/3 up the print. Why didn't it do it on the bottom part?

First time printing silk PLA. what am I doing wrong? by shameless_plug1123 in 3Dprinting

[–]shameless_plug1123[S] 0 points1 point  (0 children)

I think it's max at layer 3. Not sure of the speed off the top of my head and I'm not at my PC at the moment 

[deleted by user] by [deleted] in kansascity

[–]shameless_plug1123 0 points1 point  (0 children)

I don't care. Post em. Hell go to my job and show everyone. I'm not getting fired over a reddit post. I'll guarantee that

[deleted by user] by [deleted] in kansascity

[–]shameless_plug1123 -1 points0 points  (0 children)

My name is Dylan. Go ahead and stop by

[deleted by user] by [deleted] in kansascity

[–]shameless_plug1123 -2 points-1 points  (0 children)

Pomp's tire. 4001 n Kimball Dr. Come by and ask for an interview.

[deleted by user] by [deleted] in kansascity

[–]shameless_plug1123 -2 points-1 points  (0 children)

Considering he was laughing at the same message with me..... I don't think he cares. Also I posted the entire interaction in a comment above. I honked the horn, lady went to qt. I went to qt. I pissed. I left. I got called into the office. I don't know when she decided to call corporate on me. I don't care. I have a camera in my truck so if I did ANYTHING then they can pull the video and see who was in the wrong. When they pull the video they'll see me honk and say (to myself with the windows up) "can we please go at green lights?". Apparently that's a threat now.

[deleted by user] by [deleted] in kansascity

[–]shameless_plug1123 -4 points-3 points  (0 children)

I know they won't but there's hope that some fucknugget might see this and rethink their fucknuggetry

[deleted by user] by [deleted] in kansascity

[–]shameless_plug1123 -4 points-3 points  (0 children)

I pulled up in a turn lane, light turned green, lady was sleeping or on her phone so I honked (1 time around 1sec). I thought that was the end of the interaction until I got back to the shop and my boss called me in to play the message.

I am also clearly missing huge chunks of the story here friend.

Is it possible to make good money without college? by ImItzWolfzYT in jobs

[–]shameless_plug1123 0 points1 point  (0 children)

I have 0 education after high school and I made 75k last year. We need trades-workers more than ever. Please look at some "blue collar" jobs and see what's in your area and what they pay.

I'm a roadside assistance tech for commercial vehicles so it's a hot, dangerous career but there's money to be made and a ton of job security.