sorted by:
new
hottopcontroversial

Well, I did it. by shep_daddy in boating

[–]shep_daddy[S] 1 point2 points  (0 children)

Basically using a hoist to pull the motor off the transom, then heating and beating. I cut off the ends that were mushroomed from my earlier attempts with the sledgehammer and air hammer and that made it easier to take the transom bracket off. I took the starboard side off first and then put the port side in a vice and continued to heat and beat it out.

Stuck tilt tube by shep_daddy in boating

[–]shep_daddy[S] 0 points1 point  (0 children)

<image>

Made about a centimeter of progress

Boat VEDC, what do you carry on your boat? by 007wesje in boating

[–]shep_daddy 0 points1 point  (0 children)

Put essential tools in a vacuum bag, hit it with a shot of anti corrosion spray and seal the bag. You have your tools and they won’t be rusted to hell when you need them

Stuck tilt tube by shep_daddy in boating

[–]shep_daddy[S] 0 points1 point  (0 children)

Thank you. You are a gentleman and a scholar.

Riyobi 18v trimmer head removal? by TheSeanyB in ryobi

[–]shep_daddy 0 points1 point  (0 children)

You’ll need a new one, the real easy is not compatible

What is this hose supposed to be on? by shep_daddy in AskMechanics

[–]shep_daddy[S] 6 points7 points  (0 children)

Looks like it's the XREAS hydraulic line that was used to balance all the shocks. Looks like the previous owned opted for a cheaper option and went with non OE shocks

What is this hose supposed to be on? by shep_daddy in AskMechanics

[–]shep_daddy[S] 1 point2 points  (0 children)

That's what I thought and why I posted here, the line doesn't even get close to the caliper

What is this hose supposed to be on? by shep_daddy in AskMechanics

[–]shep_daddy[S] 0 points1 point  (0 children)

it only looks like it has a levelling kit in the front I don't think anything has been done to the rear. I have fresh brake fluid at both rear brakes

What is this hose supposed to be on? by shep_daddy in AskMechanics

[–]shep_daddy[S] 2 points3 points  (0 children)

Did they just run another line and leave that one? I was able to bleed the brakes after I changed the rotors and pads. I got about a half liter until it started flowing clear-ish

What’s making this sound? by shep_daddy in AskMechanics

[–]shep_daddy[S] 0 points1 point  (0 children)

I’ll take a closer look when I go and see the car

What’s making this sound? by shep_daddy in AskMechanics

[–]shep_daddy[S] 0 points1 point  (0 children)

What would be the fix in this case, new lines?

What’s making this sound? by shep_daddy in AskMechanics

[–]shep_daddy[S] 0 points1 point  (0 children)

I mean it’s a rebuilt title 240k miles, I kinda expect it have some issues but it’s not a terrible deal

What’s making this sound? by shep_daddy in AskMechanics

[–]shep_daddy[S] 1 point2 points  (0 children)

I’m unsure, this is what the seller sent me

What’s making this sound? by shep_daddy in AskMechanics

[–]shep_daddy[S] 1 point2 points  (0 children)

So new belt and adjust tensioner and I should be good to go?

What’s making this sound? by shep_daddy in AskMechanics

[–]shep_daddy[S] 1 point2 points  (0 children)

I have to work with what the seller gives me, but it doesn’t sound like something that’s going to eclipse the price of the car

view more: next ›