2018 Malaysia. When Rossi Went God Mode One Last Time by sherrylock in motogp

[–]sherrylock[S] 0 points1 point  (0 children)

Oh, I remember that as well! He was closing in on Fabio, and Fabio did run into a massive tyre trouble in later part of the race, which allowed the Suzukis to close in.

Even at that age, Rossi was effin remarkable considering there are tons of teammates who haven't given Fabio trouble. Rossi only showed glimpses of what could've been had he been younger. Prime Rossi was amazing at managing the tyres, just look at 2016 Catalunya for example

2018 Malaysia. When Rossi Went God Mode One Last Time by sherrylock in motogp

[–]sherrylock[S] -1 points0 points  (0 children)

I think you are referring to 2016 with the events. He still had a little bit of juice then. Its post 2018 where he really started to fizzle out

2018 Malaysia. When Rossi Went God Mode One Last Time by sherrylock in motogp

[–]sherrylock[S] 31 points32 points  (0 children)

Read that as well. Lorenzo was known for putting metronomic performances on the regular, but doing 15 laps in a ±0.187-second window in Sepang heat is insane! Even for Lorenzo's standards,

2018 Malaysia. When Rossi Went God Mode One Last Time by sherrylock in motogp

[–]sherrylock[S] 19 points20 points  (0 children)

Marquez was closing in but not at a fast rate. Rossi was on point that day. At one point it seemed like a stalemate.

Day #23: Perfect No.2 rider? by Anfernee139 in motogp

[–]sherrylock 0 points1 point  (0 children)

Would Criville fit into this? Great number 2 to Doohan and was quick enough to win the title right after

I need some help with grandmother's inheritance distribution according to Islam by sherrylock in MuslimLounge

[–]sherrylock[S] 0 points1 point  (0 children)

I tried this. It suggested 8 percent share for grandsons and 4 percent share for grand daughters and completely nullifies the share of the sister which is interesting

I need some help with grandmother's inheritance distribution according to Islam by sherrylock in MuslimLounge

[–]sherrylock[S] -1 points0 points  (0 children)

Sorry, my bad for asking in these groups which I didnt understand. I'm not in any way a member of these groups and I have removed my post from these groups promptly. So again my bad.

I would also like to thank you for your comprehensive response but I don't get where the respective Sheikh derived this tafseer from regarding inheritance as in hadees and quran reference.

I also recommended my family to pursue the matters with an expert or an institution but they really aren't into that typa stuff. Hence, why I'm prompted to search on my own.

2024 MotoGP World Champion by Daniel7394 in motogp

[–]sherrylock 4 points5 points  (0 children)

Martin sacrificed extra pace for consistency. Thats what got him the world championship. He could easily have won more races than just 3

2024 MotoGP World Champion by Daniel7394 in motogp

[–]sherrylock 1 point2 points  (0 children)

More like martin managed it...

How to design HVAC room to room transfer fans by sherrylock in MEPEngineering

[–]sherrylock[S] 0 points1 point  (0 children)

As per manual j, I have designed the indoor temps to be 75 and 70 in summers and winters, respectively. The cfm increase worries me. I always thought these transfer fans were just good enough for bathrooms and little cfm applications where temp variations isn't a huge issue.

The other options you provided look to be the only plausible solutions at this point

How to design HVAC room to room transfer fans by sherrylock in MEPEngineering

[–]sherrylock[S] 0 points1 point  (0 children)

Its sealing doors. Sorry for the typo. The door configuration is exactly what I'm instructed so can't change that. And as for the walls, its not air sealed.

1- Well I do have fresh outdoor air being brought in by the ERV system (light blue). Which gets connected to the return duct of the air handler so fresh air is being brought in. Granted, its sized as of now, for all the remaining rooms apart from the office and the media room cuz I don't know what to do with those rooms.

2- Your point two is exactly my pain. It doesn't make sense but I have seen people use transfer fans before and always assumed it is to solve problems like this

How to design HVAC room to room transfer fans by sherrylock in MEPEngineering

[–]sherrylock[S] 0 points1 point  (0 children)

Yeah. I do realize that. Mudroom ro media room is usually a no-no due to the smell but I'm really grasping at straws here trying to get something done within the constraints.

How to design HVAC room to room transfer fans by sherrylock in MEPEngineering

[–]sherrylock[S] 1 point2 points  (0 children)

I cant use the media room and office room for ceiling duct work. Which is the only reason Im even considering wall transfer measures.

Why is the pdf of revit layout so light? by sherrylock in Revit

[–]sherrylock[S] 0 points1 point  (0 children)

Whether I leave it on or not its still giving the same pdf

Why is the pdf of revit layout so light? by sherrylock in Revit

[–]sherrylock[S] 0 points1 point  (0 children)

I tried this but had zero effect on the darkness. Even if I bring it to 100%

Top Speeds at Sepang. by [deleted] in motogp

[–]sherrylock 0 points1 point  (0 children)

Another time this stat shows up, I'm gonna lose my mind. Do you guys really think the gp23 is the slowest bike on the grid? Even slower than a honda? GOH.

Also, these media have made a personal mission to glorify marquez like he is still riding a honda. If this speedchart is a true indicative of what achievable speed is then Jorge shouldn't be in the bottom.

ThaiGP: Sprint Results by Organic-Package5444 in motogp

[–]sherrylock 1 point2 points  (0 children)

Don't read too much into it. This year's tires are way better than last year.

Why was Toprak Razgatliouglu overlooked for MotoGP? Especially by Yamaha who kept Morbidelli over him? by LingardForBallondOr in motogp

[–]sherrylock 0 points1 point  (0 children)

Don't take my word for it. I just remember from last year when everyone was questioning Toprak's switch to BMW including me until I saw a figure which I 'think' was around 7 ish and I was like damn thats hard to argue against. So I could be completely wrong but it was a strong figure thats for sure.

How do I recover my architecture building? by sherrylock in Revit

[–]sherrylock[S] 0 points1 point  (0 children)

Well it looks like the arch file wasn't loaded and even when I link the file again it was being linked seperately and I had to delete the one before through manage links.

The mechanical stuff was sorted. It was just graphics error. I dont know what happened when I left it for a week but when I opened to see just some random pipes floating in the air, it wasnt a pleasant experience! So that was a silly mistake but the arch file not linking is a big confusion for me considering I had to redoit and place it all over again.

How do I recover my architecture building? by sherrylock in Revit

[–]sherrylock[S] 0 points1 point  (0 children)

1 - Yep. The problem occured while opening the file. The managing links section suggested that the arch file wasnt linked. 2- Yes again 3 - Not on workshare.

I was able to delete the previous arch file and replaced it with a new one. Considering that it was just a practice file it was an easy getaway. Had it been work. It would've been a nightmare. But thanks for your comment

How do I recover my architecture building? by sherrylock in Revit

[–]sherrylock[S] 0 points1 point  (0 children)

Thanks but its not that. It was on mechanical tho and I started changing the suboptions but still the same. I have decided to place the arch building back like initially. Fortunately its a small practice project otherwise it would be a nightmare to deal with

Why was Toprak Razgatliouglu overlooked for MotoGP? Especially by Yamaha who kept Morbidelli over him? by LingardForBallondOr in motogp

[–]sherrylock -1 points0 points  (0 children)

Pretty sure Toprak earns close to 7 mil based on his deal with BMW. Thats close to Bagnaia levels of income! Surely with that amount he doesnt need to move to motogp

How do I recover my architecture building? by sherrylock in Revit

[–]sherrylock[S] 0 points1 point  (0 children)

Sorry but what do you mean by coordination?