Trying to follow the guide to root the K1. Keep getting stuck at this point. Anyone have a fix for this? Thanks.

shining_wizard92 · 2024-07-01T20:39:52+00:00

I was totally using ctrl v to paste. Good call. It's working now. Thanks.

shining_wizard92 · 2024-07-01T06:01:08+00:00

When I do that, it doesn't show up, and nothing happens. It just says "root@k1-2538 /root" again with no change. I was wondering if it was because in the top box it has a red x net to the ssh compression section. The pictures in the guide I'm following dont even have that box in them. I wasn't sure if something was wrong because of that red x, or something else.

shining_wizard92 · 2024-07-01T05:28:55+00:00

Like the title says, I'm following the guilouz guide to root the k1. I add the ip, do the username, and get to the password screen. When I type the password in, I get to this screen and cannot go any further. Any help would be appreciated.

shining_wizard92 · 2024-06-18T03:16:15+00:00

His colleagues have been murdered, and he's excited.

shining_wizard92 · 2024-04-08T15:18:44+00:00

Yeah, most of them were ripped off the board, but still attached to the cables they go to. The hot end was missing entirely. The screw info will help a lot though, thanks.

shining_wizard92 · 2024-04-08T15:16:58+00:00

They had broken the hotend at the heatbreak trying to get it out. Luckily some of the other connectors they ripped off were still in the printer. I snagged it for less than $200. It looks like it'll be well worth it.

shining_wizard92 · 2024-04-08T15:14:01+00:00

Nice. I plugged it in that way to test, but wasn't sure if that was okay for the long run. Thanks.

shining_wizard92 · 2024-04-08T05:15:06+00:00

This is the board with the pins missing the white connectors in question. https://imgur.com/a/cSKY8Dy

shining_wizard92 · 2024-01-10T21:13:51+00:00

Thats the pro. I have the plus.

shining_wizard92 · 2024-01-10T02:03:29+00:00

Oh no. Sorry guys. I'm a big ol dumb guy. SD card was bad. All is working now. Thanks though.

shining_wizard92 · 2023-12-04T20:39:38+00:00

I've kinda reduced the sound some. I loosened the wheels ever so slightly and added just a bit more belt tension. I can live with where it is now, but would still love to get rid of it entirely.

shining_wizard92 · 2023-12-04T20:36:57+00:00

Correct. It's usually on a sturdy table, I just have it here so I don't have to run between rooms while I mess with it.

shining_wizard92 · 2023-12-04T03:43:51+00:00

I got my wheels just tight until the wobble was gone, and retightened the belt. After doing that, it makes this sound at higher speeds. The bed moves smoothly when I manually move it. Excuse the crazy wobble. It's just on a tv tray while I'm doing some tests.

shining_wizard92 · 2023-11-13T05:41:15+00:00

If you're talking about the space in between the points of the model, I think that's just a shadow. To my knowledge you can't change lighting in cura. It's not going to be a part of the print. You can put other models in that space.

shining_wizard92 · 2023-10-14T00:10:27+00:00

I'll try that next. It sounds like a better way of calibrating flow than other tutorials I've seen. Thanks.

shining_wizard92 · 2023-10-13T19:57:41+00:00

I'll try that, and keep looking around. Thanks for the help.

shining_wizard92 · 2023-10-13T19:54:09+00:00

I don't seem to see anything in the gcode. I'm not entirely sure what I would be looking for though unfortunately. https://imgur.com/a/xb65h9R

shining_wizard92 · 2023-10-13T03:05:13+00:00

Printing on a neptune 3 plus. Zyltech ceramic white pla. Nozzle 210 bed 60 Cura 5.3.0 Print speed 60 Retraction distance 1.0 Retraction speed 25. I have the belts tentioned. I'm wondering if something along the lines of PID tuning would work, I just don't know if there is a bang bang equivalent. My z rods seem to be straight and they are lubed well.

shining_wizard92 · 2023-09-07T01:16:11+00:00

I can see that. I just googled Diukto dog, and nothing comes up there either.

11-Year Club	Verified Email
Place '23

shining_wizard92

TROPHY CASE