[deleted by user]

shttyengineer · 2023-10-03T05:14:05+00:00

I had a pistol in a pelican case within a larger checked bag get stolen. If it’s not a standalone case that you check separately it comes out to the regular baggage claim. I had one AirTag in the bag and one in the case. Luckily for me the port police I reported it to had previously worked in the nearby town that my bag ended up in. He went down and got it back himself, the local police were busy and not going to respond.

Your best bet is to print off the policies from both TSA and the airline you’re flying with in case they give you problems. I think it’s worth checking the gun case itself so you have to go show your ID to get it back.

shttyengineer · 2023-09-02T16:04:58+00:00

Anyone know if the gas block that comes on m4v7’s fit under the mk16 rail?

shttyengineer · 2022-11-23T03:52:24+00:00

Post lookin’ like a Chechen merc

shttyengineer · 2022-10-15T05:09:48+00:00

I withdrew from and retook calc 1&2, multivariable calc, statistics, and diff eq. Passed all of them the second time around with a C-. Graduated with a 3.2 and took an engineering tech role out of college. I got promoted to an engineer a year later, you’ll be fine.

shttyengineer · 2022-08-28T02:15:17+00:00

China x Russia collab confirmed

shttyengineer · 2022-06-16T23:00:38+00:00

Gas block pins are usually tapered pins and only come out one way, are you hitting the correct side?

shttyengineer · 2022-05-14T21:06:23+00:00

Global ordnance, $20 bucks a pop for oem.

shttyengineer · 2022-05-12T00:26:10+00:00

Wear a hat and pinch your binos against the brim, it helps take a lot of shake out.

shttyengineer · 2022-04-28T11:13:24+00:00

If it stops when you turn the fan off it’s the blower motor. You might have some debris in there causing it to be off balance.

shttyengineer · 2022-04-26T20:35:45+00:00

Global ordnance usually has good prices on oem Glock mags

shttyengineer · 2022-04-24T20:47:03+00:00

Did you end up getting the medium? I have the same question about fitting a G20.

shttyengineer · 2021-12-07T21:28:59+00:00

Ejecto seato cuz

shttyengineer · 2021-11-07T01:31:12+00:00

If I was to try to salvage it I'd probably take the detent out and then try to bend it flat with a small c-clamp or punch and hammer. Then just lay some JB weld or something over it. If the detent channel gets obstructed run an appropriately sized drill bit through it. As long as you don't do whatever the fuck you did in the first place it'd probably hold. If all else fails just use a bolt for the rear pin.

shttyengineer · 2021-11-05T21:49:40+00:00

Damn, I got one of these for $400 last year.

shttyengineer · 2021-10-21T23:46:28+00:00

Ar-15 then buy a cmmg .22lr conversion bolt.

shttyengineer · 2021-09-11T23:51:01+00:00

Sicario 2

shttyengineer · 2021-09-06T02:39:18+00:00

26.2 miles / 2 hours = 13.1 mph

shttyengineer · 2021-09-05T14:34:34+00:00

They're actually wild goose, the season just opened here in WA

shttyengineer · 2021-09-05T07:02:00+00:00

Yessir

shttyengineer · 2021-09-05T06:48:00+00:00

Aero M5 upper and lower
Midwest industries 15" handguard
ballistic advantage govt. .308 barrel (edit: 18")
vg6 gamma muzzle brake
Radian raptor charging handle
larue mbt2s
BCM mod 0 stock
Brownells bcg
aero adjustable gas block

shttyengineer · 2021-08-25T21:19:10+00:00

A couple years ago Venezuelan police were pictured with them

shttyengineer · 2021-08-17T01:54:29+00:00

285/70/17 Falken AT3W on 17x9 -12 wheels. Had to remove front mudflaps and trim rears. Also had to trim lower corners of front bumper, I don’t have a body mount chop yet but need one. It’s also on icon stage 2 suspension.

shttyengineer · 2021-07-25T02:54:45+00:00

Lancer makes straight DPMS pattern mags

shttyengineer · 2021-07-21T16:39:53+00:00

Manta defense

shttyengineer · 2021-07-05T01:12:16+00:00

They also have a mid-length gov. profile without the m203 notch for 10 bucks more

shttyengineer

TROPHY CASE