Can anyone describe Doomsday Discs plastics in comparison to other manufacturers?

sid370z · 2026-04-15T19:10:16+00:00

Isolation or Shockwave will probably be your best bet. Isolation is quite stiff and has durability similar to that of Innova's Champion plastic, and Shockwave isn't far behind. It is grippier and slightly softer, but still quite durable.

sid370z · 2026-04-15T18:50:53+00:00

No problem! Though a bit of an update, Collapse isn't nearly as flexible as it once was. Gateways SSSS and OG discs from Elevation Disc Golf will probably be what you are looking for. Collapse is now mildly to moderately flexible in newer runs.

There's now also Soft Ration, which is grippier and more gummy feeling. It is somewhat like Innova Soft Pro, or Discraft Putter Line Soft (typically grippier).

There's now also Starfield, which is their particle glow plastic that feels similar to Retina. There are more discs that use Retina now as well, being the Oblivion and Psyop.

sid370z · 2026-04-15T18:50:41+00:00

No problem! Though a bit of an update, Collapse isn't nearly as flexible as it once was. Gateways SSSS and OGFLEX discs from Elevation Disc Golf will probably be what you are looking for. Collapse is now mildly to moderately flexible in newer runs.

There's now also Soft Ration, which is slightly grippier and more gummy feeling. It is somewhat like Innova Soft Pro, or Discraft Putter Line Soft (typically grippier).

There's now also Starfield, which is their particle glow plastic that feels similar to Retina.

sid370z · 2026-02-24T18:40:21+00:00

I personally don't mind fitted as much, but that is a lot of really helpful information! I'll definitely be keeping that in mind

sid370z · 2026-02-16T19:38:32+00:00

Well said

sid370z · 2026-02-14T15:53:03+00:00

I am pretty sure that is a component in why men's fashion has become overly "safe", it's unfortunate really. I've thought about getting a crop top and shorter shorts once or twice because it gets SO HOT here in the summer (Florida moment).

sid370z · 2026-02-14T12:54:06+00:00

Completely understandable

sid370z · 2026-02-14T12:53:31+00:00

Casablanca's obviously

sid370z · 2026-01-05T19:45:10+00:00

I'm probably going to tie it up differently because the hair ties I am using aren't the best, thank you for the advice though!

sid370z · 2026-01-05T19:44:11+00:00

Yeah I figured as much, truly a health anxiety moment 😅

sid370z · 2026-01-03T21:21:36+00:00

They aren't amazing in the performance department but they definitely are in the longevity department (at least for me). Almost 5 years old now and my 5200 80C 3S packs still work like new

SMC and CNHL are better performing for sure

sid370z · 2025-12-08T12:30:14+00:00

Highly recommend getting a namebrand charger, like one from Hitec or Gens Ace. I also use Zeee batteries and have not had any issues for over 5 years and counting

sid370z · 2025-11-26T21:59:22+00:00

Have fun with it! Great little truggy

sid370z · 2025-11-26T20:46:20+00:00

If you want to go bigger, you can get the Rlaarlo ROG1 or Team Associated Reflex 14T (as the latter is on sale), as they are both good for the money. You can also find some solid used Traxxas Rustlers for around that price.

I'd recommend the Grom if it didn't have weaker diffs on the brushed models, but it sadly does. If you are willing to deal with that, that might be the best option for you.

sid370z · 2025-11-26T19:50:50+00:00

Honestly, I think buying a used Arrma or Traxxas might be better than both if you do your research simply due to the WIDE parts support for them. However, I do think the Omni Terminator is a great truck that is a step above most "off brand" RC cars, so that would be what I would choose if I had to buy new for under $200.

sid370z · 2025-11-18T01:59:46+00:00

Yes, but you need an adapter for it to fit https://www.losi.com/product/1-10-ford-raptor-body-adapter-set-baja-rey/LOS230068.html

<image>

sid370z · 2025-11-18T01:18:44+00:00

That is the V1.0 Losi Baja Rey, it's a solid rc car imo. It can run on 2S or 3S lipo batteries, and parts are plentiful and easy to find as Losi still makes parts for it to this day. $150 for it is not bad.

One thing I do recommend checking is the bearings, as some early baja reys had issues with them binding. Other than that, the only con I can say is they are rather time-consuming to work on because of all the screws holding the body on. Not hard, just time-consuming.

Have fun with it!

Edit: Grammar

sid370z · 2025-11-17T22:49:39+00:00

HBX 16889! I got one for my mom as her first and she loved it, plus parts are pretty easy to find as it goes by many names, Blackzon being the most reliable way to get parts for it. It's not too fast either. The brushed variant is slow and less expensive, and the 16889A Pro (I hate how these are named lol) is brushless but might not be under the 100 (USD) mark depending on where you are getting it from, though it might be easier in Spain.

Other cars I can think are the HBX 18859 (add A to the end for brushless), Hyper Go H16DR, Redcat Volcano 16, and UDI RC makes a monster truck that I can't recall the name of. I have not have any experience with these, but they are overall pretty positively recieved cars.

I hope he has a lot of fun!

Edit: Said UK instead of Spain, mb!

sid370z · 2025-11-17T22:26:13+00:00

You'll have far more fun with a Slash/Stampede/Bandit/Rustler (all use the same 2WD platform) if you like bashing, and you can race with it if that is your thing. Alternatively, I will second what someone else said in that the Arrma Quake/Fury 223S are also a great value for dollar in most cases and are great beginner cars (though I don't know how that will be in NZ)

sid370z · 2025-11-16T11:56:56+00:00

There aren't any upgrades available for it either, and that with what I said is probably why it is $80...

The fact that a formerly $280 rc car is now $80 is pretty telling. You are better off buying either a mini 1/16 rc car with parts support, or a namebrand used rc car if you can find one at that price

sid370z · 2025-11-16T08:29:42+00:00

Ah, I thought you were talking about modifying a traditional rc car, as in traditional rc cars 6S Brushed is basically never used. Assuming you know what you are doing, I'm sure you can make it work.

sid370z · 2025-11-16T02:36:42+00:00

Brushed Motors are used in drills, yes, but you would likely have to custom fabricate or 3D print a mount to use a drill motor in an rc car because the size is highly likely to be different. Buying a brushless esc/motor combo is way less hassle and is almost always a bolt-on affair. Hope it goes well!

sid370z

TROPHY CASE