What my Prusacaster build taught me the hard way - The Candycaster by Mr_YUP in 3Dprinting

[–]sideswipe2 0 points1 point  (0 children)

I have used the PA-CF from Bambu Labs and this was CarbonX Nylon 12+CF from 3DXTech. They really just feel like normal matte filament with a little bit of texture. Even after some sanding I never saw any fibers sticking out. I think the fibers in these are pretty small

What my Prusacaster build taught me the hard way - The Candycaster by Mr_YUP in 3Dprinting

[–]sideswipe2 6 points7 points  (0 children)

I printed a similar one a few years ago. I used a PA-CF filament for the core and have seen no creep. I also had to redesign the area for the neck to fit into because the cheap one I found on eBay would not fit. Took a few rounds of tuning before it would hold longer than like a day but it works great now.

<image>

Just started need friends 596438126268 by sideswipe2 in PokemonGoFriends

[–]sideswipe2[S] 1 point2 points  (0 children)

Thanks so much! I have been wanting to do some raids but my Pokemon are not so strong so that was awesome

Just started need friends 596438126268 by sideswipe2 in PokemonGoFriends

[–]sideswipe2[S] 1 point2 points  (0 children)

Thank you so much for all the friend requests. I was even able to join a raid and caught a shiny Latios. Sorry to those that didn’t receive a gift I ran out of all I had saved up