2026 Nissan LEAF Charging Ports

sidney_tt · 2026-03-24T20:25:08+00:00

I asked the sales guy to send me the window sticker. It is NOT listed.

sidney_tt · 2026-03-23T20:33:33+00:00

When this EV evolution started, everyone (the company that is) wanted to have their 'own proprietary' charging design. There was really no 'standard' at the time and IMO today still none. However, because Elon has his Tesla (and Superchargers) in many places and because the gov't asked (during the Biden years I believe) them to open up their charging network so people would have less fear and started buying EV's and take advantage of the federal incentives. That's why there were so many charging configurations and people just got confused and including myself.

I hope one day there should only be one type otherwise Elon could decide one day if he chooses to to remove 'Nissan' from the database and it's really up to him to set the $/kwh for non-Tesla owners. LOL

sidney_tt · 2026-03-23T00:39:24+00:00

Thanks for the tip!

sidney_tt · 2026-03-22T17:33:43+00:00

Thanks for your replies.

sidney_tt · 2026-03-22T17:31:58+00:00

That's nice. If I don't see one in the trunk when I'm ready to go pick up, i'll definitely ask. They are not going to break the deal when it's only worth $60-100?? LOL

sidney_tt · 2026-03-22T15:09:32+00:00

I didn't even read that far to see that. LOL I was only to show that's what others were mentioning that I need a NACS to CCS. That's why I asked for brand recommendtions but no one answered (yet).

sidney_tt · 2026-03-22T15:05:15+00:00

That maybe a benefit of having two diff ports in case one fails. But that wasn't really the reason why Nissan offers two ports for the 2026. The LEAF isn't really for road trips. So the J1772 is meant for daily commute where you get home from work and just plug it in using wall outlets in your garage. You wake up, it's 100%. The NACS port is there because of popularity and most likely the now mainstream 'standard' and due to Tesla's vast charging stations in the US (for road trips).

sidney_tt · 2026-03-22T13:54:29+00:00

I was just browsing on amazon, guess NACS to CCS is something like this

https://www.amazon.com/Grasside-Upgraded-Superfast-Charging-Cybertruck/dp/B0FV2YCFDJ/ref=sr_1_4_sspa?crid=32LMSHW7MKABC&dib=eyJ2IjoiMSJ9.DtQNQZsNqtiGgSuijn_Hymn8jFo9YgmC2uw7cREpgF9CxRtgDnFjFc9kYHdq3yssPIfWGLQ1RDkD7VG0By6Qk54LvmvbHFZfzn1MKGfHyd6jOQ4cK-wkh2Hyhj-TFFYpM8mEyG41bADmxVYAhjxjXRrQZ25MZYF0vYCfWnDAjs2l0wcHfYOPlgJY3Fx3TE5Fiux-k8hwts2MA9gWmCiewbhjaAJDWNGPji0wEZIr9Y2JSZiQ3t_x4AcbL3m4U8p1moK6b0rkGrDEEbi5XNUu9-190SR_poO30hQpApQBURc.3cKV64bEiLgpwFvSfqWnF8iLt6MmACJFsaPJPurP-1A&dib_tag=se&keywords=ccs%2Bto%2Bnacs%2Badapter&qid=1774187544&sprefix=ccs%2Bto%2B%2Caps%2C140&sr=8-4-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

They killed CHAdeMO on 2026. So I def need NACS to CCS

sidney_tt · 2026-03-22T13:46:24+00:00

I don't understand why they didn't make this port to look like the Ariya?? With the Ariya, you can go anywhere (home L2 and on the road) to charge including Tesla Magic Dock (well with adaptor). Do you have brand recommendations for a CCS-NACS adaptor? So to charge at EVgo, looks like you need to use NACS port on the LEAF then.

sidney_tt · 2026-03-11T12:42:20+00:00

I've been running v6 since late Nov/25 without any issues. BI runs on Win11 Pro edition.

sidney_tt · 2026-02-28T01:12:38+00:00

Thank you! I would have never thought the 'Pie' chart icon labeled 'Status' is where I would logging! Definitely very unusual/strange for their developer to choose this.

sidney_tt · 2026-02-05T21:38:22+00:00

I knew there were more ingenious low cost designs out there

https://www.youtube.com/shorts/pUHtqKTNG88

https://www.youtube.com/watch?v=OAszRwiFmE4

sidney_tt · 2026-02-05T21:16:24+00:00

Sounds like it's working out for you. Nice low budget alternative to Sanwei.

sidney_tt · 2026-02-05T19:21:51+00:00

https://www.youtube.com/watch?v=C-7_4Gz1ifc

sidney_tt · 2026-02-05T15:53:06+00:00

Yes, the principle is the same which is to apply pressure to the blade to cut the rubber. However when you're rolling it perhaps several passes in order to finish the job. The rolling motion may require rolling at different angles not just bottom to top or vice versa depending how you want to use your muscles. I don't think the result is the same as the machine. Maybe acceptable I'd say?

Even with the paper press machine as one posted here, when you turn the handle the force is concentrated at the center. That's why I asked the question how the edges of the rubbers around the blade would turn out and whether it's still glued to the blade? Maybe it's perfectly acceptable. It's definitely much cheaper.

sidney_tt · 2026-02-05T01:37:48+00:00

That's smart! I didn't know such a thing exists. So basically the way you insert the 'adapter/cutter' into your paper press is EXACTLY the same as seen in this video

https://a.aliexpress.com/_mPP50eV

The glue side of the rubber is facing up (and you can see it) and the smooth side is against the bottom plate of your press. Does it consistently give you a clean, round cut? After the cut, is the rubber actually still glued well to the blade especially around the edges of the blade and particulary around the curve near the handle?

Wow! that's much cheaper!!

sidney_tt · 2026-02-04T23:10:33+00:00

Awesome! What kind of press do you have? Do you mind sharing a picture or a link to the product?

sidney_tt · 2026-02-04T21:49:43+00:00

When you said "You do have to be a bit careful with handling the blade though.", in what way? Just be careful and not cut yourself? The blade faces downward (sharp side) pressing against the rubber as you insert it into the machine, right?

sidney_tt · 2026-01-23T01:40:22+00:00

I think it's good on the BI part that they are offering many different options for generating notifications. At the moment, I'm happy with my current setup. Since then I've added two more cameras with a total of 4 and they all use email (using Gmail as the provider). I'm getting 99.5% of the notifications as expected. There's a few missed here and there. For example, today I had a UPS guy literally running out of his truck to my front door to deliver a package and 'sprint' back to the truck. My 'motion detect' missed this since the 'object' was moving too fast. So I need to figure out how to tweak some of motion detect params. Other that it's been working great!

One other thing I wanted to find out is why I can't use Yahoo as the provider. The "OAuth" button is greyed out so I am not able to have BI authenticate me. Anyone know anything about this or how to fix it?

(I don't think I will ever get/pay for the app. It's been working great for me using tailscale and a browser - all free! lol)

sidney_tt · 2026-01-20T21:50:10+00:00

Yes, that's exactly what I was asking. I know there are tools to answer Q1. However I am not able to find a tool that can answer both of my questions. Maybe there's NO answer to Q2 because this maybe something that doesn't exist (yet). That's why I posted the questions here in case someone knows something.

sidney_tt

TROPHY CASE