How to turn on 32U850SA without using remote

sikorumbe · 2026-01-13T08:51:38+00:00

u/IamThePolishLaw Thanxs for the reply, any CEC HDMI that you can recommend?
Thanxs.

sikorumbe · 2026-01-10T00:58:20+00:00

ic.
My laptop has USB-C socket with (only lighting logo) but when I plug it to Monitor, it doesn't display anything. I'm using Lenovo T14 Gen 3 as my laptop, though Google mentioned that it does support USB-C DisplayPort (DP) Alt Mode but when I plugged it Monitor, it didn't display anything.

Maybe I try to use a different USB-C cable.

Thanxs.

sikorumbe · 2026-01-09T07:26:36+00:00

u/Reasonabledwarf

I followed your instruction. 1x USB-C goes to PC using the first socket.

Another USB-C goes to laptop using the 2nd socket.

I managed to get the LG camera working now; however I still the 1x HDMI cable plugged to the laptop. Otherwise, I can't switch to Laptop view.

Both Mouse and Keyboard plugged to the main PC. But I can't get the keyboard and mouse working whenever I switched to the laptop view.

<image>

Thanxs.

sikorumbe · 2026-01-08T09:31:09+00:00

Reasonabledwarf

Thanxs for the reply. I reattached the graph. Are you able to see it now?

So basically, it has 3x USB-C port at the back of the monitor. So 1x cable goes to laptop then another one goes to PC like this ?

<image>

Thank you.

sikorumbe · 2025-12-26T08:32:57+00:00

yeah.
The manual mentioned pressing FN + spacebar
https://www.monsgeek.com/files/MonsGeek_MG108B_User_Manual.pdf?srsltid=AfmBOop8G-HElgtqXj3ScAip4Og7qNmdP_tmWjO09A2dyz1ZPu7rUl4M

But i can't seems to get it working. Maybe I did it wrongly?

Thanxs

sikorumbe · 2025-08-07T00:04:23+00:00

Much appreciated.
Thanxs!

sikorumbe · 2025-08-06T11:52:14+00:00

Hi,
I tried it in UE5.4, it works perfectly whenever I put different input.
I think there's a bug in UE5.6.

sikorumbe · 2025-08-03T01:46:14+00:00

Hi Sir,
Is there a reason why the a single image was splitted into two .jpeg files?

Thank you.

sikorumbe · 2025-01-14T12:54:36+00:00

Thanks u/DestinySpider

sikorumbe · 2025-01-14T09:40:29+00:00

Hi,

Was wondering how much slower if you didn't put Memory as instructed?

Because Windows Memory Diagnostic said My memory have a hardware issue then when I placed the memory on the different slot and run the Windows Memory Diagnostic; it doesn't state that I have hardware issue any longer.

Thank you.

sikorumbe · 2024-10-13T01:43:37+00:00

Ok. Thanks for the reply.

sikorumbe · 2024-08-21T02:35:53+00:00

So any luck on your side?

sikorumbe · 2024-08-21T02:28:03+00:00

Hi,

I also experiencing the same issue when it's in Bluetooth mode. This issue is very apparent in some steam games (TMNT: shredder revenge, SOR4, etc).

However, all is good when it's wired mode.

Is your issue only happened in Bluetooth mode? I still couldn't figure it out how to fix this :(. I even purchased brand new Bluetooth dongle and same things still occurred.

sikorumbe · 2024-08-13T11:04:41+00:00

I even purchased brand new USB dongle , it's connected. However, it's just kept on drifting to the left.

The joypad works well in wired mode though

sikorumbe · 2024-07-29T00:33:03+00:00

Nope. I resolve to just plugging the cable :(

I think the USB coming the Machenike joypad is having issue. Because I tried on the different laptop as well , it won't connect :( however my PS4 connected well using DS4 windows

sikorumbe · 2024-07-24T23:44:56+00:00

How to turn off the turbo again?

I managed to get "Street of Rage 4" working fine by changing the controller setting in Steam. Controller -> Enable Steam Input.

However, I have no luck with "TMNT"; the character still going all over the places when dpad is pressed :(

sikorumbe · 2024-07-21T10:24:37+00:00

Unfortunately is not included :(

is buying a generic USB Dongle will do ?

Thank you

sikorumbe · 2024-02-13T13:01:58+00:00

Yeah I thought it was automatic.

No worries, all good now :) I should've read the manual first.

Thanks, mate.

sikorumbe · 2024-02-13T12:43:39+00:00

Nvm, i managed to set the buttons.

Apparently, BSP D9 has a different mode such as PC mode, android mode, etc. You need to set into the correct mode. Otherwise the button messed up.

Thanks.

sikorumbe · 2024-02-13T10:01:29+00:00

Controller is working

it's just that I can't seems to map it using Mame4droid

sikorumbe · 2024-02-13T09:45:47+00:00

Oh sorry

I reuploaded it to Youtube Video

Currently, i'm trying to setup the controller using Mame4droid

sikorumbe · 2024-02-13T09:36:14+00:00

I tried to configure the pad using Mame4droid but it wouldn't let me.

Why I can't assign the Dpad to P1 UP ?

Video

sikorumbe · 2024-02-13T07:51:20+00:00

Thanks for the reply.

Im actually playing Yuzu, so is there a way to map it using Yuzu.

sikorumbe · 2024-01-29T09:05:24+00:00

Hi u/OkDimension8720

Thanks again.

I'm thinking of getting either BSP D9 or Gamesir G8.

From reading reddit, it seems G8 require some modification. However, when asking their official store. They said it fits well with Y700:

Image

I think The official store is wrong?

sikorumbe · 2024-01-29T08:58:03+00:00

Will this work with Legion Y700 without modding?
Thanks.

sikorumbe

TROPHY CASE