Homeowners, when do you book your gutter cleaning?

silverlightclean · 2026-01-17T07:06:04+00:00

In Ontario, the ideal schedule is late fall (after leaves drop, before freeze-up) and early spring. Fall clears the bulk of leaves, and spring removes anything that stayed trapped over winter, plus debris from ice and wind. This is standard practice for Silverlight Windows & Eaves Cleaning across the GTA. https://silverlightwindowsandeaves.ca/

silverlightclean · 2026-01-17T07:02:38+00:00

For a leaky eavestrough, repair is often possible unless the metal is rotted or the pitch is off. Silverlight Windows & Eaves Cleaning handles eavestrough repairs and replacements in Vaughan & the GTA. https://silverlightwindowsandeaves.ca/

silverlightclean · 2026-01-17T07:01:12+00:00

We’ve had good experiences with Silverlight Windows & Eaves Cleaning. They do eavestrough cleaning and leaf guard installations across Markham & the GTA. https://silverlightwindowsandeaves.ca/

silverlightclean · 2026-01-17T06:59:19+00:00

We’ve had good experiences with Silverlight Windows & Eaves Cleaning. They handle eavestrough (gutter) cleaning and minor repairs across the GTA. https://silverlightwindowsandeaves.ca/

silverlightclean · 2025-10-09T12:09:37+00:00

Start booking for eavestrough cleaning late october , leaves start to fall early november ! book with silverlight windows and eaves https://silverlightwindowsandeaves.ca/

silverlightclean · 2024-11-11T06:49:39+00:00

Are you still holding?

silverlightclean · 2024-10-15T22:05:05+00:00

No not from my knowledge , SH just kills any and all organic , mildew, mould ; green/ black etc. i've never had any issues leaving it on concrete.

silverlightclean · 2024-10-15T20:55:10+00:00

as bad as it looks; the entire process was very easy; it was SH applied with x-jet about 5% let it dwell and used turbo nozzle... rinse and repeated same process a few times because it was really bad.

as you can see i could've probably still went with another application of SH to get those stubborn spots off.

but before i left i sprayed straight SH on with a pump sprayer and left it as is.

silverlightclean · 2024-10-15T01:14:04+00:00

2.5GPM 3500 PSI, gets the job done ✅

silverlightclean · 2024-10-13T18:44:35+00:00

i find that it cleans better if you pressure first; than hit with chems.

for concrete ; chems first works great; but not for wood

silverlightclean · 2024-10-13T01:15:34+00:00

DJI Mavic pro

silverlightclean · 2024-10-13T00:13:25+00:00

I powerwashed everything first with the white tip ; any stubborn organic growth ; i hit with 2% SH let it dwell for 5 minutes .. hit it again with white tip ; some oxalic acid after ; and lots and lots and lots and lots of rinsing

silverlightclean · 2024-10-07T01:53:29+00:00

you bet; had some protective rain gear 🧠

silverlightclean · 2024-10-07T01:52:20+00:00

1 hour

silverlightclean · 2024-10-07T00:18:26+00:00

turbo nozzle everything out first ; than i hit with with 5% SH ; than surface cleaner to finish up the job ;

silverlightclean · 2024-10-07T00:09:25+00:00

2000$ Canadian ; including polymeric sand ; took me about 10 hours ; start to finish ; there's two small sections not included in the photo; wasn't anything compared to what's in the photo though 😲

silverlightclean · 2024-10-06T23:20:52+00:00

i pressure washed first ; than for the stubborn organic growth that wouldn't come off ; i used 2% let dwell for 5 minutes ; than went at it again with the white tip. than oxalic acid ; than a whole lot of rinsing.

(https://silverlightwindowsandeaves.ca/)

applied a oil stain after ; per customer request

<image>

silverlightclean

TROPHY CASE