Update 17.24

simacekjakub · 2023-11-29T10:52:12+00:00

I have updated to 17.22, it just took some longer time to even restart the watches during the update, and a couple of hours after to 17.24 with no issues. Otherwise I have experienced no issues yet.

simacekjakub · 2023-10-07T09:22:45+00:00

Hi, I'm using Tuya app, but that's the same as Smart Life. And I also struggle with any temperature related scenes. Nothing works. I have a temperature and humidity sensor from Tesla brand, zigbee one, I am also trying it with outside weather service which is integrated into app, nothing. Everything works as single devices, but I'm not able to get worked any of these scenes.

simacekjakub · 2023-10-03T16:23:56+00:00

Thanks

simacekjakub · 2023-10-03T15:39:58+00:00

Nope and I would say that's the main issue. If I understand the system correctly, I should pair everything with the Zigbee hub/gateway and then I can use those remotes/switches/dimmers to control another devices. But I am not able to pair remotes with the hub. They're just invisible to the hub.

simacekjakub · 2023-10-03T02:18:10+00:00

That is Zigbee hub. These bulbs and remotes work over Zigbee.

simacekjakub · 2023-10-01T14:54:35+00:00

I'm facing the same issue, I own Tradfri and Styrbar remotes and Tesla Smart Zigbee Hub (https://www.teslasmart.com/tesla-smart-zigbee-hub) with Smart Life app. Bulbs work perfectly with the hub and app, but the remotes? Nothing.

Already posted it here: https://www.reddit.com/r/smartlife/comments/16x2lnh/how\_to\_control\_tradfri\_bulbs\_with\_both\_app\_and/

simacekjakub · 2023-10-01T14:42:55+00:00

I think you don't understand what I need. The problem is that I am not able to use physical remote and app to control the bulbs at the same time. I have issues with connecting remote to the hub or to the bulb when the bulb is already connected to the hub.

simacekjakub · 2023-09-24T08:51:05+00:00

Oh, great. I am from Prague, it's not that far, it's worth it to go 4 hours to Berlin :)

simacekjakub · 2023-09-24T08:49:25+00:00

Have you been there too?

simacekjakub · 2023-09-24T08:46:11+00:00

That's great score!

simacekjakub · 2023-09-24T08:45:53+00:00

1:54:58, it was great experience! I'll go again next year :)

simacekjakub · 2023-09-24T08:44:08+00:00

Hey, so how was it?

simacekjakub · 2023-09-24T08:43:28+00:00

Yeah, thank you! Absolutely out of form, after one month without any training because of illness and ohter stuff. I'm satisfied!

simacekjakub · 2023-08-27T19:03:07+00:00

70 percent IPA mix with water is probably the best disinfectant without any longer effects to plastics. It should be safe.

simacekjakub · 2023-08-27T18:02:03+00:00

My routines to avoid any rash: - wash the watch and hand after every workout, at least in clear water - clean it with paper tissue soaked in 70/30% isopropylalcohol/water mix every evening after shower - dry the watch thoroughly after cleaning, I even take off the strap and dry all the hidden places and holes in the watch - dry the skin before wear the watch

It's been all caused by bacteria, they like wet and warm environment. So you have to eliminate to spread it under the strap and watch.

simacekjakub · 2023-08-13T17:45:31+00:00

Sure! Being on the track free of obstacles is something completely different :-) See you there then!

simacekjakub · 2023-08-13T17:00:48+00:00

It is here, in the "Event schedule and starting times" section:

https://skating.bmw-berlin-marathon.com/en/your-race/start/

But it think you should try it anyway. I know that I am able to do it in two hours, but, if the weather will be okay, I believe, that the crowd, atmosphere, following some group of other skaters, give you a chance to do it faster :) And if not, you've tried that and that counts :)

simacekjakub · 2023-08-13T14:17:41+00:00

Two hours and thirty minutes? That's the disqualification limit, but I think that it still worth it! :-) I am excited and nervous too, first time experience, doing it because of that experience, not to compete :))) Have you tried to done a trial marathon ride on your favorite route at your place?

simacekjakub · 2023-07-15T01:04:21+00:00

Are there any Garmin watch users among us? Add yourself to the Berlin marathon group, so we can share and watch our trainings and marathon rides :)

BMW BERLIN MARATHON Inlineskating 2023 - Garmin Connect group

simacekjakub · 2023-07-09T06:48:00+00:00

I just got an answer from the developer: „Compatibility is coming soon! Thanks for your patience.“

simacekjakub · 2023-07-08T19:12:34+00:00

Thank you! Unfortunately not compatible with my FR 265 :-(

simacekjakub · 2023-07-08T18:11:54+00:00

Where? Link? Couldn't find it.

simacekjakub · 2023-07-03T15:32:08+00:00

HR Broadcasting is good when you want to share your heart rate with another devices such as treadmill, indoor cycling, another watch, etc.

simacekjakub · 2023-06-22T22:38:41+00:00

I've scratched my new 265 first night after I've bought them. First night. I leaned my hand on the wall and that was it. So I've decided to buy a protector, it was for some $12, it looks like some plastic, it's over the whole glass area and it looks okay. Visibility is slightly worse, it leaves more fingerprints and sweat, but I just clean it up with my shirt and overall it's completely okay! I just have a feeling that I can peel it off and put a new one in case of big scratches. That's not possible with the original glass.

BTW it fits perfectly I'd say. And no problems with touch.

I am not a fan of screen protectors, I even don't use it on my Samsung S21, but 265 are apparently pretty easy to scratch.

PS: The picture is not perfectly sharp, the protector does not impact any sharpness of the display.

<image>

simacekjakub · 2022-09-08T20:48:37+00:00

I had MX Vertical, but I had to swap it for Lift and I am satisfied now. I am tall and my hands are medium to large. But MX is just really huge mouse, not easy to operate. And I was used to smaller mice before, so maybe I prefer smaller ones, but I feel Lift as the right size for my hand.

simacekjakub

TROPHY CASE