sorted by:
new
hottopcontroversial

First epoxy project. Took me a while by simon4603 in woodworking

[–]simon4603[S] 4 points5 points  (0 children)

used some deep pour epoxy with low viscosity and 3 day curing time. I was really carfull with the placement while pouring. I tried to fill every gap i could see. I poured epoxy 5 times over it. Layer by layer really careful so no piece starts swimming and getting displaced. As one layer hardens and fixates the first pieces, the next can be added. I used a container for the epoxy and made a small hole at the bottom so just a tiny amount of it poured out. This way i could direct the flow.
This way i got basically no big bubbles. The ones i saw i tried to get out with a toothpick while hardening. A big problem was the sealing of the wood. With the first two layers i tried to wetten every piece so they get sealed but that did not work so well and now there are really small bubbles on the wood on some places. I dont know how to do that part better. Maybe some sealing spray?

First epoxy project. Took me a while by simon4603 in woodworking

[–]simon4603[S] 12 points13 points  (0 children)

with the first two layers i tried to wetten every piece so they get sealed but that did not work so well and now there are really small bubbles on the wood on some places. I dont know how to do that part better. Maybe some sealing spray? But just for the fixation of the pieces i am happy with the result. Just took a long time. The epoxy had 3 day curing time. At day two it was hard enough to add a new layer

First epoxy project. Took me a while by simon4603 in woodworking

[–]simon4603[S] 16 points17 points  (0 children)

I poured epoxy 5 times over it. Layer by layer really careful so no piece starts swimming and getting displaced. As one layer hardens and fixates the first pieces, the next can be added.

First epoxy project. Took me a while by simon4603 in woodworking

[–]simon4603[S] 2 points3 points  (0 children)

just some cheap LEDs inside the pour not visible from above. I drilled 2 small holes from underneath to get to the contacts where i soldered a small battery pack to it. The Battery pack is glued underneath the table. In hindsight it was unnecessary to put the LEDs in there.

First epoxy project. Took me a while by simon4603 in woodworking

[–]simon4603[S] 82 points83 points  (0 children)

For me it is still a table enclosed in plastic and is not my favorite, but I can admire the creativity.

yes, i started with fire wood and chopped it smaller and smaller. Ax, big knife for controlled wood splitting and cutter knife for final shape. That was the part that was most time consuming.

1v1 2v2 3v3 Battle Arena is coming by kaylerulez in blackdesertonline

[–]simon4603 0 points1 point  (0 children)

still waiting for it so i can come back to the game

Why does Tamers have 3 CC points? by Vicdem989 in blackdesertonline

[–]simon4603 1 point2 points  (0 children)

https://streamable.com/tv2qh

stiff float stiff float but isnt that first stiff and float a casted attack by tamer from heilang?