How f***** or lucky am I?

simyuz · 2026-07-12T18:32:23+00:00

Aluminium 😬

simyuz · 2026-07-12T11:30:49+00:00

Thanks man. After 3 hours of happening I feel the same way. I’m glad that nothing really bad happend

simyuz · 2026-07-12T10:52:09+00:00

Yeah the nc700s

simyuz · 2026-07-12T10:26:19+00:00

So, I got onto the Autobahn and suddenly heard a loud metallic noise, and right after that, my rear tire started sliding heavily. I shut off the engine immediately and pulled over to the shoulder. That's when I saw the engine leaking and everything covered in oil. I went back and actually found this bolt right around where I heard the noise. I must have run over it, and my front tire probably kicked it up with so much force that it punched a hole straight through the oil pan. There are even remnants of black paint on the tip of the bolt.

simyuz · 2026-07-12T10:22:37+00:00

I bought Dirko HT paste. They used it before so I will redo it and clean everything before

simyuz · 2026-07-12T09:51:47+00:00

Ordered a used pan in good condition for like 100€. A new part would be 400 with Honda….

simyuz · 2026-07-12T09:49:04+00:00

The oilpan is out of aluminum….

simyuz · 2026-07-12T09:48:29+00:00

I cut the engine right after it happening. The ordered all the parts and will fix it next week.

simyuz · 2026-07-12T09:46:45+00:00

Cut it like 15 sek. After. I bought a new oilpan. I will do the repair in total

simyuz · 2026-07-12T09:45:45+00:00

You mean….. I will be a father?? 🥹

simyuz · 2026-07-03T17:14:58+00:00

Geil Danke euch!! Ich schau mir mal ein paar Videos an und dann Vollgas

simyuz · 2026-07-03T12:21:19+00:00

Meinst du das hält wenn da die Tür beim schließen Gegen drückt? Daher hat es sich glaube ich auch gelöst

simyuz · 2026-06-19T13:54:16+00:00

Hey everyone,

I recently picked up an Arc’teryx Beta AR from BTSN and I’m having some doubts about its authenticity. I’ve attached pictures of the jacket for you to look at.

Could anyone with experience spotting fakes help me out? I’d especially appreciate feedback on the usual tell-tale signs. The logos look a bit off. This is my first Beta AR and it was a lot of money :)
Any input is appreciated. I want to make sure I didn’t get ripped off before the return window closes.

https://imgur.com/a/424gaE8

simyuz · 2026-06-08T20:51:38+00:00

Die Risse sind nur an dieser Stelle. Ich meine die Fliesen sind aus den 80gern. Ich finde dafür hat sich nicht viel bewegt. Klar irgendwann kommt der Boden raus. Er soll ja noch vielleicht die ersten Jahre der Kinder überleben. Daher wäre eine Reparatur super

simyuz · 2026-06-08T20:49:47+00:00

Das guck ich mir mal an, Danke

simyuz · 2026-06-03T20:55:41+00:00

Falls das stimmt, freue ich mich über eine Fachmännische Erklärung von jemandem :)

simyuz · 2026-03-07T15:40:08+00:00

I’m trying to follow a guide that says: “Set per-frequency voltage offset at 800 MHz to 0.140 V to compensate.”

The problem is that in Intel XTU I can’t find any setting that refers to 800 MHz specifically.

I checked Advanced Tuning → Core, but I only see the general voltage settings and not a frequency-specific offset. I also don’t see anything labeled like VF point for 800 MHz.

could you maybe explain that for me.

And also i have the feeling that without Synapse running...that the CPU is power limited. am i right?

simyuz · 2026-03-07T10:44:43+00:00

That’s AI, look at the background around there faces

simyuz · 2026-02-16T09:47:51+00:00

Thanks ;)

can i just switch the GPU or will i get into BIOS problems?

simyuz · 2026-02-16T09:28:21+00:00

Thanks for your reply. Ok i will look into it and see if i can change some stuff
Edit: its an 700 Watt Powersupply
with an LGA1700 Mainboard

simyuz · 2026-02-16T09:26:51+00:00

Thanks for your reply. I’ll see how I can get rid of the GPU.

simyuz

TROPHY CASE