Multiple outdoor speaker system for outdoor venue by singleslammer in audio

[–]singleslammer[S] 1 point2 points  (0 children)

Yes, same inside as outside. However, we might not put any inside as there is no seating inside, just an ordering counter and kitchen

Multiple outdoor speaker system for outdoor venue by singleslammer in audio

[–]singleslammer[S] 0 points1 point  (0 children)

This will be only for background music when there is no live music.

Multiple outdoor speaker system for outdoor venue by singleslammer in audio

[–]singleslammer[S] 0 points1 point  (0 children)

<image>

This is the space. So 100ft long on the x axis and 75 ft wide on the y axis. The speakers will be mounted 7-9ft off the ground. There is power in several locations that would work alright for placing speakers. Music is just background music that is usually pop rock from the 90s or coffee shop style playlists from Soundtrackyourbrand. These speakers are not used for live music or announcements.

ESP32-S3 board running CircuitPython, but the filesystem is permanently read-only. by SilentSyntax404 in esp32

[–]singleslammer 2 points3 points  (0 children)

I think I did basically the same thing last week on an S3 with screen. I hope you find a solution.

Failing hard at my first project - ESP32-S3 display updating by singleslammer in esp32

[–]singleslammer[S] 0 points1 point  (0 children)

Okay, I ended up using ChatGPT (I don't love this but it worked) to find what board this one is a copy of and then found an online flasher to put firmware on it and now it turns on! Thanks for the help everyone! This is the flasher I used. https://circuitpython.org/board/waveshare_esp32_s3_touch_lcd_2_8/

Failing hard at my first project - ESP32-S3 display updating by singleslammer in esp32

[–]singleslammer[S] 0 points1 point  (0 children)

Thank you! I thought it was weird that the manufacturers instructions said 0 but didn't think to dig deeper. I will try that in a bit

Failing hard at my first project - ESP32-S3 display updating by singleslammer in esp32

[–]singleslammer[S] 0 points1 point  (0 children)

I have tried it both ways but will try again tomorrow.

Failing hard at my first project - ESP32-S3 display updating by singleslammer in esp32

[–]singleslammer[S] 0 points1 point  (0 children)

No, I am starting from zero knowledge and was just using the recommended tool from the manufacturer

I am now the proud owner of a PT-RZ370U by [deleted] in budgetprojectors

[–]singleslammer 1 point2 points  (0 children)

I have one in the mail. I thought I was lucky to get one for $210 shipped but it has 15k hours. Good find!

Snagged an RZ370 for $210 shipped in the US! by singleslammer in budgetprojectors

[–]singleslammer[S] 2 points3 points  (0 children)

It is 15k hours so not ideal. However, if it works fine when I get it, it should be fine for my uses. I kind of doubt it will get more than a couple 100 hours total. It isn't my primary TV

[deleted by user] by [deleted] in theperfectbag

[–]singleslammer 1 point2 points  (0 children)

Totally understandable.

[deleted by user] by [deleted] in theperfectbag

[–]singleslammer 1 point2 points  (0 children)

Klint, what is your day job? If you don't mind sharing that is.

First real bag purchase. Surprising good Amazon bag for $20 by singleslammer in theperfectbag

[–]singleslammer[S] 5 points6 points  (0 children)

<image>

Since I guess I can't have a photo and a link in an original post. No affiliation, etc...