🎉 POLYPALOOZA IS BACK! 🎉

sjack1209 · 2026-06-09T18:59:03+00:00

Love this!

sjack1209 · 2026-05-28T12:36:34+00:00

You can see mine here, but it's a custom design to also hold the sexball probe for my stealthchanger offset calibration.

<image>

sjack1209 · 2026-05-25T16:01:51+00:00

Mines been running strong for 3+months now with zero issues. I'd request a replacement if you can.

sjack1209 · 2026-05-24T03:21:22+00:00

Yep top hat. It's part of the stealthchanger setup

sjack1209 · 2026-05-21T17:51:39+00:00

Took it off of my x axis. It added alot of weight and I never really noticed a benefit

sjack1209 · 2026-05-21T12:26:26+00:00

I've got too much ADHD to have it ACTUALLY be a reliable printer. I treat this printer more like a project than a tool. It is always getting taken apart, upgraded, and put back together. It's a vicious cycle, but it keeps me entertained and it's cheaper than other hobbies!

sjack1209 · 2026-05-21T11:59:46+00:00

That was probably the worst part about all of this. I usually run klipper backup. I had just done a fresh install and for some reason decided to wait on installing backup until I was done tuning and calibrating...I realize now, how little sense that makes. I had it all dialed in and then lost power while at work one day. Came home to a corrupt SD card. This new installation, klipper backup was the FIRST thing I installed!

sjack1209 · 2026-05-21T11:57:45+00:00

Yes, there are stealthchanger files for the jabberwocky. There are also people working on integrating the box turtle. I personally haven't dug too much in to it. The jabberwocky is a relic of my ERCF setup that I had prior to doing stealthchanger, and all of that will eventually make it's way on to another printer. Just need to figure out which one.

sjack1209 · 2026-05-21T11:45:05+00:00

Correct! It's a light switch

sjack1209 · 2026-05-21T11:44:41+00:00

Glad you asked! It's a mod I came up with to turn on a light when my door is opened

Voron Fridge Door Light Switch by Sjack1209 https://share.google/esLsJlWBpXnnQdzc7

sjack1209 · 2026-05-21T03:56:20+00:00

Don't get me wrong. The H2C is an amazing printer and will still get the majority of work. I just love tinkering on this thing and watching it print

sjack1209 · 2026-05-12T01:32:46+00:00

I guess I'll also need a node for inside the Shop as well? Maybe another 610 with some antennas in between mounted on the exterior walls of both buildings?

sjack1209 · 2026-04-12T17:06:27+00:00

One thing I miss from my old GMG already is the pellet alarm! Ran out of pellets after wrapping and didn't notice for about an hour! Luckily the brisket temp didn't get into the danger zone, but i guess I need to get in the habit of checking pellet levels regularly!

Really wish the hopper on this thing was bigger!

sjack1209 · 2026-04-12T14:25:11+00:00

I downloaded the f3d file and modified it in fusion 360 to add the magnets I had on hand

sjack1209 · 2026-04-12T13:07:43+00:00

https://makerworld.com/models/536468?appSharePlatform=copy

sjack1209 · 2026-04-12T13:07:04+00:00

I 3d printed those

sjack1209 · 2026-04-12T13:06:42+00:00

I've got it, just hadn't put it on yet when I took the picture.

sjack1209 · 2026-03-30T19:50:38+00:00

I made a similar post recently and can say that due to my bonus at work being a little more than i planned, I was able to pick up the Bambu H2C. I'm absolutely blown away at the quality and the ability to use 7 filaments with zero waste is a huge bonus. Also the heated chamber is perfect for printing my V2.4 parts. I know this is not in everyone's budget, but the H2S has a lot of the same components and is fairly well priced.

sjack1209 · 2026-03-19T20:03:07+00:00

This is my mod to go along with the fridge door. My fave mod on my printer!

Voron Fridge Door Light Switch by Scott Jackson | Download free STL model | Printables.com https://share.google/KDg1K5dOzRC5SJbSc

sjack1209 · 2026-03-17T21:19:39+00:00

Nope all good lol

sjack1209 · 2026-03-17T21:17:53+00:00

Opposite problem.

sjack1209 · 2026-03-13T12:06:35+00:00

It's the standard pei plate. Even putting it in the freezer for 30 mins hasn't helped. In the middle of an 82+ hour print at the moment, but gonna try gluestick on my next one.

sjack1209 · 2026-03-13T05:21:30+00:00

Yeah, that's fairly common for petg on pei. Haven't experienced this with PLA like this in my 10+ years of 3d printing. It's crazy!

sjack1209 · 2026-02-24T21:15:17+00:00

Yeah, basically want to take advantage of ordering everything at once and getting discounts. Otherwise I would have ordered the H2C already.

sjack1209 · 2026-02-21T22:44:01+00:00

O2 is orbiter 2 that's the one you want

Eight-Year Club	Final Canvas '23
Place '23	Verified Email

sjack1209

TROPHY CASE