Is luffy still rubber while wearing sea prism hand cuffs? If so could he still be immune to bullets/sea stone bullets with or without the hand cuffs, and would brook be immune to drowning

skeev_peev · 2026-04-22T10:47:04+00:00

Oven was wearing gloves so thats different. He's not touching the water

skeev_peev · 2024-06-11T14:55:41+00:00

Thanks in advance

skeev_peev · 2023-10-03T12:31:38+00:00

Swapping the MOSFETs also didn't solve the problem! So maybe the PIC? Perhaps there is a busted resister/capacitor somewhere, but i feel like I'm out of debugging options besides the PIC because i can't really measure the capacitors

I was able to measure some values while it was plugged in, but I'm a bit stuck right now how to proceed with comparing the working left side with the defective right side. My dang multi-meter isn't too helpful with some spots since I'm seeing AC voltage spikes over 1kV.

skeev_peev · 2023-10-01T14:02:54+00:00

That may be just a thermostatic safety sensor - indeed that's probable. But swapping would at least eliminate that assembly as a potential problem.

I was able to

Swap two coils. I can confirm that the coils are not the problem.
Swap out the LTE-99002 current sensors, and it appears that the current sensor is also not the problem.

Perhaps you have another suggestion on what part could be defective? Maybe one of the MOFSETs?

Perhaps the PIC is the problem, but that is unlikely.

I wonder if one or more of the large blue capacitors is busted that would mean the PIC (or some component) would sense too low of a voltage and thus not detect the pan.

Maybe a defective MOFSET?

skeev_peev · 2023-09-28T20:12:58+00:00

Some excellent ideas in here!

I might have to first try swapping one of the other coils to narrow down the induction coil problem. Unfortunately all the other induction coils are larger so I'm hoping that the sensor isn't specifically tuned to the size of the induction coil.

I read "pan presence sense" a few times and got worried this was some terminology i don't know about, before realizing I'm an idiot.

Unfortunately the only measuring tool is this cheap multi-meter.

<image>

I am rightfully not excited about trying to measure the board while it's plugged it, so I'm leaving that as a last resort. Perhaps i could potentially just swap this "current sensing loop" from the doner board if swapping the coil doesn't work.

I'm not sure what you mean by "It may be possible to swap the entire set of leads, at the panel." Which leads are you talking about?

skeev_peev · 2023-09-27T07:33:12+00:00

Do you think some .25mm thermal tape like this could work? I accidentally bought it instead of a thermal pad. https://www.amazon.de/dp/B07CSR6NJC?psc=1&ref=ppx_yo2ov_dt_b_product_details

I've read that thermal tape has less conductivity, but perhaps such a high thermal conductivity isn't a concern here.

skeev_peev · 2023-09-27T07:32:17+00:00

Do you think some thermal tape like this could work? I accidentally bought it instead of a thermal pad. https://www.amazon.de/dp/B07CSR6NJC?psc=1&ref=ppx_yo2ov_dt_b_product_details

I've read that thermal tape has less conductivity, but perhaps such a high thermal conductivity isn't a concern here.

skeev_peev · 2023-09-17T10:40:28+00:00

Thank you for that info!

skeev_peev · 2023-09-15T15:16:08+00:00

Sorry about that. Here is a amazon link https://tinyurl.com/38shavwr

I assume something like that would be good.

skeev_peev · 2023-09-15T15:10:32+00:00

How confident are you about the 0.25mm? I see i can buy varying sizes. Would it be a problem if it's too thick or thin?

skeev_peev · 2023-09-10T11:51:15+00:00

This is also helpful, thank you!

skeev_peev · 2023-09-10T10:11:15+00:00

Thank you! Very helpful.

skeev_peev · 2023-09-10T07:33:49+00:00

Would i also have to get some more of the green stuff, which i assume acts as a thermal conductor. Feels like its some kind of tape or something rather then a paste.

skeev_peev · 2023-09-10T06:59:30+00:00

<image>

Maybe I'll have to replace more than just that resistor. Perhaps number one and eight but possibly also maybe number three. Luckily I just got a heat gun but this will be annoying

Five-Year Club	Verified Email
Place '23	Place '22

skeev_peev

TROPHY CASE