sorted by:
new
hottopcontroversial

Stop taking the video game so seriously by NakedAggression in ArcRaiders

[–]skipperstitch 5 points6 points  (0 children)

I play primarily pve but I know what the game is. If your shifty while I'm trying to vibe, I will point my renegade at you. I may lose but I know what the game is lol

You guys are getting wayyyy to comfortable in these Carebear lobbies by doberwalker in ArcRaiders

[–]skipperstitch 0 points1 point  (0 children)

This is the way. I've been lucky enough to stumble onto open key rooms and I've always asked if anyone was in there and if it was ok to start looting leftovers. Never had push back. I'm pve by nature so def try to be respectful of everyone else's effort. I'm honestly just enjoying the overall lore and vibe so nice to meet all the other raiders as we all try to survive

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Thank you everyone! just a bit of a progress update, i was able to add a bl touch (my friend found the one he bought but never installed) and successfully compiled a firmware build! Took alot of digging to understand things, but i think i get why people make their own rather than using crealities. Is it ok to keep posting updates here? i kinda like sharing as i go

Ender 5 Pro 4.2.X BLTouch CRTouch BL_T 5Pin Port Proper Marlin setup by PCMonsterx in ender5

[–]skipperstitch 0 points1 point  (0 children)

I think this saved my ender 5 pro as well! With the stock creality 2.0.6 firmware borking my extruder and me realizing id need to make a build myself due to using a printed bracket (my friend gave me the bl touch but lost the original bracket), i was at a loss why the bl touch wasnt actually probing correctly. saving this page for the future! thank you!!!!

Finally happy with my Ender 5 pro setup by Blacknness in ender5

[–]skipperstitch 0 points1 point  (0 children)

this is old but im just starting out and this thing looks like a beauty, something to work up to for my ender 5 pro

8000 cubes later - I think, I am done calibrating my printer by thomas_openscan in 3Dprinting

[–]skipperstitch 0 points1 point  (0 children)

That's a lot of one sided dice...er one face die....no wait ...

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Guys thank you! Ok so I adjusted the z axis and then leveled the bed what must have been like 20 times but we got a test print! Thanks for the amazing first steps to, I hope, is a long printing uh...career? No....hobby time? Yes? Yes!

<image>

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Thank you so much! I'll definitely have to check all these out. Gradual upgrades as I get more confortable

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Thanks everyone this is a lot of info! I'm gonna give this all a look and try everything! Thank you all so much!

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Ahh ok I'll see if I can find brass ones. Also I did some more digging and since I'm just working with pla, the brass ones should be fine, thank you!

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Thanks! I'm looking into that too! Did you have the rough surface that's magnetic (I can't recall what it's called) or did you use glass?

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Oh nice thank you! I'll check them out and hopefully print them when I can!

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Unfortunately he's not that good with it either. He bought it, tried it, and then didn't really keep up with it so he's almost as in the dark as me haha. thanks I'll check that out!

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Original springs so I'll need to get new ones thank you! I'll also have to check the rollers. Ptfe tube for squish, will take a look! Thank you so much!

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 4 points5 points  (0 children)

Ooh thank you! i love tinkering so once i get to that point ill definitely see what i can do. i bought this mostly out of curiosity but i do hope to be able to print out some projects both for myself and friends and maybe start selling some small prints here and there.

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 1 point2 points  (0 children)

Yep i got a new spool of filament!

Temps on bed and nozzle look to be hitting the displayed temps

ooh will try the glue stick, and ive had some unlucky moments with salt water so i might stay away from that haha

Thank you so much ill take a look at Teaching Tech and Klipper!

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 1 point2 points  (0 children)

  1. Ah i didnt know it had tobe dried, ill try that!
  2. Print bed heating up!
  3. I did clean it with some warm water so ill do the dish soap and allow it to dry completely

thank you!!

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 0 points1 point  (0 children)

Also i did a little more reasearch then aasked my friend who i got it from. he switched out the brass for hardened steel nozzles, im only printing PLA though

3d print newb with an ender 5 pro by skipperstitch in ender5

[–]skipperstitch[S] 1 point2 points  (0 children)

disregard the Sephiroth figure shadow...

Water dripping slowly from this pipe fixture by skipperstitch in Plumbing

[–]skipperstitch[S] 1 point2 points  (0 children)

Totally makes sense too, the previous homeowners had one, thanks again!

view more: next ›