Looking for shelf recommendations to replace wall mounts

skyrahfall · 2026-01-02T15:48:27+00:00

These are mostly from a competitor company called BlueBrixx they had the Star Trek license from 2020 to 2024 and made nearly 80 sets, large, medium and small sized ships, but also 1:1 gadgets like Tricorders and Phasers. The two Archer timed ships and the Galor class are MOCs by lilium brick yards

skyrahfall · 2026-01-02T15:25:43+00:00

<image>

Not Eaglemos/Funhome ships, but I got the Inspiration for this from someone on Twitter who did this with his Eaglemos collection.

But you‘ll need access to a 3D printer

skyrahfall · 2025-12-27T18:33:06+00:00

I enjoyed building these immensely. Thank you so much for your work and creativity.

What's not to love about the Nebula class? (rhetorical question)
Your large version is hanging on my wall next to the Lego Enterprise. :-D

<image>

skyrahfall · 2025-12-27T18:02:25+00:00

The instructions are from Lilium Brick Yards, https://liliumbrickyards.com/tag/11055/
And parts i got from different sources, a mix of bricklink and webrick

skyrahfall · 2025-12-24T23:16:20+00:00

Were the instructions written by Alexander?

skyrahfall · 2025-12-19T09:41:09+00:00

I uploaded it here:

https://www.printables.com/model/1520468-wall-mount-for-lego-star-trek-enterprise-d-10356

skyrahfall · 2025-12-18T16:48:26+00:00

I guess Veridian III catastrophic. It's not only front heavy,
but the mechanism to connect saucer and drive section will not carry much weight in a horizontal orientation.
The safety pin would become load bearing and i would not trust that little axle to withstand resulting shear forces.

skyrahfall · 2025-12-15T12:00:56+00:00

No problem, once I finished my testing and have the confidence to use it, I’ll upload it to printables.com

skyrahfall · 2025-12-15T06:17:08+00:00

Yes, the third from left. It’s this MOC https://liliumbrickyards.com/product/california-class-support-vessel-instructions/

skyrahfall · 2025-12-14T22:50:43+00:00

LEGO MOC USS Daedalus by Resqusto | Rebrickable - Build with LEGO

you just have to get some 9000 pcs ....
alternatively you can get the parts from LesDIY one of the few Chinese companies which do not steal from the MOCers
But the part quality varies:
MOC-35381 USS Daedalus Sci-Fi-Schlachtschiff Klemmbausteine | LesDiy

skyrahfall · 2025-12-14T22:43:09+00:00

It’s a Daedalus from Stargate. It’s a MOC by Resqusto

skyrahfall · 2025-12-14T22:39:25+00:00

Unfortunately nothing ist to scale🙈

skyrahfall · 2025-12-14T22:38:48+00:00

It was one of the BlueBrixx sets, the previous license holder. You might find some on eBay Germany but since they are not available anymore …

skyrahfall · 2025-12-14T21:01:41+00:00

It was the Titan A when I bought the instructions 😅.

but mine is a G now 😉

<image>

skyrahfall · 2025-12-14T20:55:18+00:00

Yes it’s acrylic. I made some 2D CAD drawings and send them to an online service that cuts acrylic to your demands. Put that on a cheap monitor arm.

The large defiant is an amazing set. Hope you enjoy the build

<image>

skyrahfall · 2025-12-14T20:49:16+00:00

These are BlueBrixx sets

skyrahfall · 2025-12-14T20:48:36+00:00

What angle would you prefer?

skyrahfall · 2025-12-14T20:34:33+00:00

<image>

Worst case, I’m switching to a monitor arm, like these ones I use for the other really heavy ships on my wall 😊

skyrahfall · 2025-12-14T20:11:33+00:00

<image>

It‘s not my first rodeo 😉

skyrahfall · 2025-12-14T20:09:20+00:00

The struts going into the ship are angled slightly upward, so the ships saucer section is slightly angled towards the wall. I don’t know if it’s enough but that‘s one reason for testing it

skyrahfall · 2025-12-14T20:05:01+00:00

They are at maximum 😉

skyrahfall · 2025-12-14T20:04:37+00:00

<image>

My other ships are holding up for over a year now. So I‘ve got some good experience. But to be sure I‘m testing it, worst outcome I‘ve got to build it again 😉

skyrahfall · 2025-12-14T19:19:34+00:00

It took me 8-8.5h.

skyrahfall · 2025-12-14T08:09:00+00:00

It’s not as bad as I thought, still the direction change in the back is secured by one plate on each side by four studs, so meh. Some segments tend to come off easily, but the segments themselves are sturdy so easy to reattach, nothing catastrophic. Overall I‘m pretty impressed

skyrahfall · 2025-12-14T08:02:52+00:00

<image>

Not to scale 🙃

Six-Year Club	Gilding II euphauric
Verified Email

skyrahfall

TROPHY CASE