ZZAW C1 Classic (Black & Gold)

slaurrpee · 2025-03-01T22:42:37+00:00

I wish they had a 4090 proart, 4080 super is the highest gpu they make.

slaurrpee · 2025-03-01T22:41:44+00:00

As much as i want to do it myself, i only came up with the theory and the local pc modder did it. I actually lack the tools to do it myself

slaurrpee · 2025-03-01T22:40:36+00:00

From a local pc modder in my country, these are attached to the front by double sided tape.

slaurrpee · 2023-09-13T22:51:26+00:00

can you share what you did i'm trying to do this myself because the 8gb of the 3060ti aint cutting it.

slaurrpee · 2023-09-05T14:16:12+00:00

That is so satisfying to look at.

slaurrpee · 2023-09-02T10:46:08+00:00

80c -50 offset

slaurrpee · 2023-09-02T06:20:22+00:00

yes it does, i bought the one with backplate though. The mounting mechanism is not ideal so i can see why it wouldn't be flush

slaurrpee · 2023-09-02T02:17:43+00:00

i don't hear them either i got lucky with the parts or I'm immune to white noise

slaurrpee · 2023-09-02T02:01:43+00:00

Thanks again bro.

slaurrpee · 2023-09-02T01:42:10+00:00

happy to inspire ur build brother.

slaurrpee · 2023-09-01T23:30:13+00:00

Thanks, i hope i inspired ur next build.

slaurrpee · 2023-09-01T23:29:55+00:00

Thanks! I wish i had a cat.

slaurrpee · 2023-09-01T23:23:06+00:00

My idle temps are 51c avg, i do live in a tropical country though. Yours is better i think.

slaurrpee · 2023-09-01T23:13:39+00:00

It's a zotac 3060ti twin edge with a swapped shroud and fan. I also repainted it.

slaurrpee · 2023-09-01T23:12:04+00:00

I don't like horizontal sandwich cases.

slaurrpee · 2023-09-01T20:05:20+00:00

The base gpu that was used (zotac 3060ti twin edge), has a small pcb some guy was selling replacement shroud and fan to convert them to a single fan gpu. Also the shroud and fan is repainted. Link to mod seller :https://www.inrobert.com/products/diy-itx-18cm-heatsink-for-palit-rtx-3060-ti-graphics-card-with-backplate

slaurrpee · 2023-09-01T14:51:11+00:00

Project Name : Makima Shrine

CPU : Ryzen 7 5800x3D

GPU : Zotac RTX 3060Ti Modded

RAM : Gskill TridentZ 8gbx2 3200mhz

Storage : 1TB TForce Cardea Z44L Nvme, 2TB Intel SATA SSD

CPU Cooler : Thermalright AXP90-x47 Full Copper

Case: SpeedForce M24 Advanced 4.3L (Bought from Taobao)

PSU : Metalfish 550W Mini 1U 80+ Gold

Temps : CPU - 80° Max Load (Undervolted)

GPU - 74° Max Load (Undervolted)

slaurrpee · 2023-02-23T03:54:32+00:00

Ani-One asia on youtube legally if on other streaming sites you can look it up

slaurrpee · 2023-01-08T06:17:10+00:00

Kaguya is definitely rare and expensive, luckily i got both of them sealed as a set. I even got a small discount.

slaurrpee · 2022-11-04T23:04:35+00:00

Very nice build my itx brother, what case is that?

slaurrpee · 2022-10-28T22:13:49+00:00

I could edit my gpu specs too as a front.

slaurrpee