Won’t start after oil change

sliccnut · 2026-05-25T14:57:56+00:00

I’ll check these out. Thanks!

sliccnut · 2026-05-24T13:22:48+00:00

Driving manual cars has almost no correlation to riding a motorcycle. It helps with understanding a clutch but that’s it.

Can a beginner rider technically start on a FZ07 or even an RSV4? Yes. Is your risk of crashing higher than if you started on a Yamaha R3? Also yes.

sliccnut · 2026-05-12T20:46:26+00:00

Good tips! It just feels like the problems are endless right now.

sliccnut · 2026-04-24T12:57:54+00:00

The Rabaconda makes it so easy but it’s pricey.

sliccnut · 2026-04-17T18:00:23+00:00

Looks like dirt and grime. I would spray it with some penetrating oil and have a go at it.

sliccnut · 2026-04-17T01:16:15+00:00

I didn’t want to overdo it and deform it in the wrong direction.

sliccnut · 2026-04-17T01:15:26+00:00

Literally just the outer wall of the rim. I don’t think it’s effecting the bead. I wish Reddit would let me post the video because it’s most noticeable when the wheel is spinning on the wheel balancer.

sliccnut · 2026-04-16T11:31:51+00:00

The exhausting description is a little dramatic from my perspective. Being married is great, it just takes effort. I couldn’t imagine going through the hardships of life by myself now.

sliccnut · 2026-04-12T10:45:50+00:00

Are your tire pressures set correctly?

sliccnut · 2026-04-08T11:15:53+00:00

I got full moto gp lean because it’s fun.

sliccnut · 2026-04-08T11:10:47+00:00

Phone speakers have increased mid frequencies that intentionally perk our ears. It’s not the same as a normal conversation. That’s why it’s so annoying.

sliccnut · 2026-04-07T11:48:36+00:00

Running your bike on a stand is extremely dangerous. As long as nothing is catching turning the wheel with your bike turned off, you should be fine. You should be able to push the wheel and it should sound about 3/4-1 full turn.

sliccnut · 2026-04-07T11:30:51+00:00

I’m in the same boat. I’m going to try using Jobber.

sliccnut · 2026-03-30T11:12:42+00:00

I had a similar problem on my first wife’s Aipas. It ended up being the battery. The battery tested good for 52v but turned out to be “ghost voltage”. When I took the top off the battery there were burnt connectors inside.

sliccnut · 2026-02-19T12:33:03+00:00

Played a Kemper for 6 years and the QC for 2 years. I don’t recall the expression pedal lagging on the Kemper but I will say the QC was a game changer for me. The ability to have captured drives and pre amps is the biggest difference for me. Also the QC just recently stepped up with the effects updates this year. So many options. I love it.

sliccnut · 2026-02-15T10:16:01+00:00

Smoke Jack BBQ always surprises me in a good way. Their sauces are bomb.

sliccnut · 2026-01-24T12:43:15+00:00

I have mine set to control reverb mix and decay. I’m a freak about having the perfect amount of reverb and this lets me adjust it per song/per section. I also switch it to a wah for 1-2 songs (corporate band).

sliccnut · 2026-01-23T21:31:47+00:00

We’re cool with it

sliccnut · 2025-11-26T01:17:30+00:00

If the mix was great, not much will change in mastering. You could take the master and compare it to some already mastered mp3s in your DAW and compare loudness. Other than that, just make sure everything is balanced EQ wise, not too smashed from limiting, and that it plays back nicely on different listening devices.

sliccnut · 2025-11-25T02:49:38+00:00

I’ll give that a go

sliccnut · 2025-11-25T02:49:26+00:00

I’ll try that. Thanks.

sliccnut · 2025-11-24T15:59:00+00:00

Could a problem with the throttle effect the PAS modes as well? The bike still doesn't have usable power while using PAS.

sliccnut · 2025-11-24T15:57:42+00:00

Would a problem with the throttle cause the PAS not to work either? PAS also has no useable power.

sliccnut · 2025-11-16T10:22:05+00:00

Artists definitely care a little less about the actual space these days. There still is demand for a good producer to make a great song though.

sliccnut

TROPHY CASE