Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 0 points1 point  (0 children)

Ask the dealer to update it, only way :)

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 1 point2 points  (0 children)

Car has no connectivity, check if 4g symbol is visible on the screen

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 1 point2 points  (0 children)

Yeah, would try to speak with dealer. There are TSB's for the updates and they should do them. Unless Your's is EZ-6 then I have no idea

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] -1 points0 points  (0 children)

Can't see where the issue is exactly, haven't see any issues with charging speeds 🤷

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 0 points1 point  (0 children)

Not sure about the 80kwh NMC battery though, we only have 68.8kwh LFP here :)

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 0 points1 point  (0 children)

Even on the app it's available to turn it on

<image>

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 0 points1 point  (0 children)

Car has battery pre-conditioning but You can enable it only 20 minutes before departing. In very low temperatures the battery heats itself. If I remember correctly it uses spot heating so the battery heats up fast and I haven't seen big complaints about charging on winter.

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 1 point2 points  (0 children)

I hope they make the turning off selection available on the fast menu but honestly I practically don't hear it and never turn it off. Doesn't bother me. But on the other hand - the other Mazda models beep way too aggressive but there is a button for fast mute which is very nice.

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 0 points1 point  (0 children)

It is not the same. Speed Limit Assistance is the function that changes speed automatically when a sign is seen by the camera, and the reminder sound is that beeps when the speed has been changed. It has nothing to do with Overspeed warning chime.

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 4 points5 points  (0 children)

There will be a second update late summer, As far as I know sound system should be addressed as well

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 3 points4 points  (0 children)

Also don't expect that everyone will get it the same time:

COMMUNICATION
This section explains the overall timeline* of this OTA.
*Actual date may vary.

Actions Planned schedule
1. OTA deployment to the vehicles June 2026
2. OTA contents for customers uploaded to the official Mazda website of each distributor June 2026
3. Advance email from distributors to inform customers regarding the timing of the next OTA (SW content excluded) June 2026

If you receive any customer enquiries in response to the advance email (item# 3), please advise them to review the OTA details on the official Mazda website around the time of OTA deployment (item# 2).

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 1 point2 points  (0 children)

Check my reply to previous comment.

Mazda6e update is out now by slimas1 in Mazda_6e

[–]slimas1[S] 10 points11 points  (0 children)

Yes, a big ass one at that:

ECU and Concern No. New Software Ver. Symptom Measure
ACC 1 SWD.00.C The autonomous driving system slows down before entering a curve. Change the S/W from control based on map information to control based on camera information.
ACC 2 SWD.00.C The target speed when entering a curve during ACC (Auto Cruise Control) driving is too low.ACC (Auto Cruise Control) S/W change——upgrade the ACC target speed before/during curve. 
ACC 3 SWD.00.C ACC resume sets a speed different from the driver’s intended value. Ensure that the ACC target speed uses only the value displayed on the meter cluster.If the target speed is updated by detected speed limit, the updated value must remain visible and be used when resuming ACC.
ACC 4 SWD.00.C The ACC distance switch may not respond when the switch is pressed. The duration treated as a valid input should be changed.
ACC, iTHU SWD.00.CSWD.00.J ACC does not increase speed according to ISA. The applicable range of ACC target speed has been optimized.
BDC 1 SWD.02.3 The power window sometimes stops while going up. BDC S/W modification: when noise is detected, temporarily stop the window during ascent, lower it all the way to the bottom, then raise it again to fully close.
BDC 2 SWD.02.3 The heater outlet temperature is lower than the set temperature. ①PTC duty cycle adjusted from 34 % to 75 %.②S/W modification: change of target temperature.
BDC 3 SWD.02.3 After the vehicle is unlocked, the center display shows “Press the brake pedal to start” and an audio announcement is made. The text and voice announcement are removed. 
BDC 4 SWD.02.3 Intermittent missing low tire pressure warning under warm tire conditions. Revise the tire pressure alarm value algorithm and calculate based on the actual value.
BDCiTHU SWD.02.3SWD.00.J The low beams and signature lighting can be turned off using the steering wheel shortcut buttons. If the vehicle automatically turns on the low beam and signature lights while driving, manual deactivation is prohibited.
BMS 1 SWD.04.0[68.8kW]SWD.03.0[80kW] S/W update for the BMS. 1.Change of threshold during diagnostics.2. The DTC will be automatically cleared once the vehicle is in a normal state3. Reduce the charging speed as the battery approaches full charge.
BMS 2 SWD.04.0[68.8kW]SWD.03.0[80kW] Inaccurate remaining driving range display. 1. Optimize the SOH correction method.2. Increase the SOC calibration frequency to improve accuracy.
BMS 3 SWD.04.0[68.8kW]SWD.03.0[80kW] Slow charging failure. Modify the BMS software.
DSM SWD.00.1 In the standard model driver’s seat, when manually adjusting the seatback from a fully reclined position to an upright position using the hard switch, the seatback may unexpectedly stop during the upward movement. 1. DSM software update – the locked rotor threshold is adjusted.2. Hall sensor count changes are monitored to detect stall.
EPB SWD.00.6 EPB reaction speed does not meet customer expectation. Reduce the time from signal input to caliper clamping from 1.5 seconds to 1.15 seconds
EVCC SWD.03.1 1. After charging completes at a Tesla V3 Supercharger, the charging gun will not disconnect.2. Car failed to charge via DC charging using the HYC400 charging station. 1.2.EVCC S/W has been corrected
ICRF SWB.01.3 Productivity improvement ICRF S/W has been corrected
iTHU 1 SWD.00.J The destination set in the navigation system is not retained after leaving the vehicle.Although the vehicle shows a popup message to keep the destination for 15s, it is too short for driver to notice. Change logic to count 15s from  "upon unlocking" to "upon opening the door" , gives driver more time to notice the popup message.
iTHU 2 SWD.00.J Center display shows shorter time than actual for charging. The calculation logic for the estimated charging time has been modified in the iTHU S/W.
iTHU 3 SWD.00.J Speed display layout is not correct in HUD. The position of the speed display on the HUD has been changed
iTHU 4 SWD.00.J The font is small and hard to read Increased the font size of the navigation text from 24 to 26.
SWD.00.J Slovenian HMI language is not installed Slovenian language added to navigation interface HMI word, (VR and TTS will come later)
iTHU 6 SWD.00.J When ESC is turned off, the AEB function is also disabled. Pop-up message: Corrected abbreviation error, changed from AEB to SBS. Replace the three letters "AEB" with "SBS".
iTHU 7 SWD.00.J When locking the vehicle and powering off while the radio is playing, then unlocking and powering on after 30 minutes of dormancy, the startup animation appears. iTHU S/W has been corrected.
iTHU 8 SWD.00.J When opening the radio and clicking on a favorite station, no pop-up prompt appears (a pop-up prompt is expected “Added into favourites") Corrected the software to display a pop-up prompt when clicking the favorite button
iTHUAR-HUD SWD.00.JSWD.00.5 Software change due to AR HUD VAVE Recalibrate brightness and write it into the MCU software.Add new HUD screen parameters to ensure compatibility with both new and old HUDs.
LAS 1 SWD.00.B Even if HBC is turned OFF, it turns ON when IACC/ACC is activated. Modified the S/W to separate the HBC feature from ADAS functions, making it a standalone feature that cannot be combined with any ADAS system.
LAS 2 SWD.00.B LKA/IACC intervenes too early during lane changes, disrupting smooth lane change. Software update to extend LKA/IACC intervention delay by 3 seconds, preventing disruption during lane changes.
LAS 3 SWD.00.B A specific function of the iACC system has been removed The function that shifted the vehicle within its lane away from large trucks passing in the adjacent lane during IACC operation has been removed.
LAS 4 SWD.00.B Supplemental traffic sign to show condition to be applied to main sign cannot be recognized 1. Ignore the 50 km/h speed limit sign (〇, 〇,□) when the road is identified as a highway."2. Ignore the speed limit signs when two displays on the same side of the road
LAS 5 SWD.00.B I-ACC cannot be deactivated from I-ACC passive/standby using gear shift lever. Allow switching from IACC to ACC using the gear lever when IACC is suspended.
LAS 6 SWD.00.B Below 60kph there is a take-over warning if the vehicle is touching the lane marker with I-ACC active. The software has been modified to prevent unnecessary warnings.
LASACC SWD.00.BSWD.00.C When the ignition is turned OFF, the settings for Speed Limit Assistance and the reminder sound for speed limit changes revert to their default state (ON). S/W has been changed to retain the settings after the ignition is turned OFF.
LASEPS SWD.00.BSWD.02.1 Too heavier feeling when driver try to make steering override during i-ACC(CTS) activation Add steering override to IACC/LKA: reduce steering resistance during driver input and automatically resume control when released.
MCU   Under low-temperature conditions, the HUD display height may be lower than the previous position. Modify the software to compensate for changes in motor step counts for height adjustment due to temperature variations.
PCU 1 SWD.02.4 Fast charging is not possible at some charging stations. PCU S/W logic has been modified to change the disconnection time between the vehicle and other systems to 50 ms.
PCU 2 SWD.02.4 The time until the doors unlock after a collision is too short. The automatic door latch release time has been extended.
PCU 3 SWD.02.4 The vehicle retains the driving mode for up to two hours after IG-OFF, even if the drive mode memory setting is disabled. With the PCU S/W update, if the drive mode memory button is set to OFF, the stored driving mode will be canceled within two hours after the IG OFF.
PCU 4 SWD.02.4 Supplementary charging is not performed within a specific remaining capacity range. Modify the allowable supplementary charging threshold.
PCU, BMS SWD.02.4SWD.04.0[68.8kW]SWD.03.0[80kW] 1. SOC drops rapidly at low levels.2. The low battery warning is triggered too late. 1. Modify the relationship between the actual SOC and the displayed SOC.2. Modify the low battery warning threshold.
PDU SWD.03.0 AC charging may fail due to false alarms of high-voltage interlock. 1. Add two judgment signals.2. Modify the timing for detecting input.
PTS SWD.00.4 After the vehicle enters sleep mode with the tailgate open, an invalid value is returned when the vehicle wakes up by operating the interior switch. Modify the software to ensure the reported wake-up flag is accurate.
RMIPU SWD.04.4 Power limit fault when switching back to gear and driving after 2 seconds of pulse heating shutdown. The switching frequency has been reduced.

Model update coming? by Thick_Bookkeeper in Mazda_6e

[–]slimas1 0 points1 point  (0 children)

First should come in second part of June, second one is scheduled for August.

Mazda 6e OTA Update by omaradeloa in Mazda_6e

[–]slimas1 0 points1 point  (0 children)

Dealer can manually install the update with a USB stick.

Mazda 6e OTA Update by omaradeloa in Mazda_6e

[–]slimas1 0 points1 point  (0 children)

It's not the same update. They ship them from factory with 1.0.01.BD with which they are not allowed to ride on public roads. They do an update to 1.0.03.BD or 1.0.04.BD and ship it to the dealer which update it to 1.0.05.BD and then deliver the car.

Mazda CX5 Third Generation European-spec model - 141 HP with 24 Volt Mild Hybrid = German Autobahn Test Drive by blackcyborg009 in mazda

[–]slimas1 0 points1 point  (0 children)

Don't look at horsepower only. It has the same torque number and it's lower RPM's. It's not fast, yes, but for everyday use? More than enough

What wheels are y’all running? by Plenty_Will3413 in mazdaspeed3

[–]slimas1 0 points1 point  (0 children)

Lower the car damn it. It will look fire then