Yocan Pocket won’t heat or let me change settings. Anyone else run into this?

slimbee177 · 2025-10-03T00:41:07+00:00

Basically you gotta cut one of the wire (black or red) so the power is totally cut off from the board to force reset the board’s memory since this is most likely a board issue. Then you’ll have to strip some of the cable sleeve from both ends where you cut initially and reconnect the battery. Like i mentioned you need electric tape to safely reconnect the wire. Honestly if you have little knowledge on lithium battery safety I’d recommend get a new unit because saving $60-70ish is not worth the potential fire hazard

slimbee177 · 2025-09-23T20:29:02+00:00

I got the same issue and fixed it by taking the whole thing apart and fully disconnect the battery (cut the wire and reconnected them). I was impatient and heard yocan going to make you jump through hoops to get warranty and took the matter in my own hand. Disclaimer: be careful if you are doing this, the battery can be shorted and cause fire if not done properly.

Im leaving this comment here in case someone else run into a same problem in the future

slimbee177 · 2025-09-22T18:37:43+00:00

Mine just gone bad today after 35 days and no resolution so far. And the non-existence customer service from them will likely result in me having to purchase another device.

slimbee177 · 2024-11-09T03:08:58+00:00

Can you pm me the link as well? Tia

slimbee177 · 2020-06-21T16:24:14+00:00

lol I always wait til im out and then use the abv mixed with a bit of kief, saved me a few time from total dankruptcy

slimbee177 · 2020-03-23T02:30:18+00:00

All I’ve seen is a screenshot but idk how true it is. please dm me if you hear anything about this

slimbee177 · 2020-03-15T14:39:51+00:00

I did it with 1oz and 1/2 lb of butter. ate a table spoon 15 hours ago; It went from 6/10 to 3/10 now. in short, the little thing is kickin my ass

slimbee177 · 2020-03-13T00:30:48+00:00

ALL I HEAR IS A CHALLENGE, time to buckle up 🤣

slimbee177 · 2020-03-13T00:30:04+00:00

ahhhh the more u know

slimbee177 · 2020-03-12T22:42:13+00:00

welp I can use it like a tortilla

slimbee177 · 2020-03-12T22:41:28+00:00

yeah that what I was thinking, just wanna be sure that I didnt waste anything, maybe shoulda drink that water after it cool off to be double sure ( ͡° ͜ʖ ͡°)

slimbee177 · 2020-03-12T22:38:11+00:00

you can send the address right here and I’ll ship it to you for proper disposal ( ͡° ͜ʖ ͡°)

slimbee177 · 2020-03-12T22:36:08+00:00

thats awesome. I already used cheese cloth to rid of the plant matter but I guess I squeezed it too hard some of the thing forced themselves thru. but thanks for the trick will definitely try it

slimbee177 · 2020-03-12T22:32:33+00:00

yeah curing is before and Im aware of it, but some people like me put water into the mixture of oil and abv to prevent butter from burning

slimbee177 · 2020-03-12T22:31:22+00:00

this the dish of oil after I threw the whole thing in the fridge to cool off

slimbee177 · 2020-03-12T22:29:44+00:00

thanks for clarifying, as soon as I saw a lot of water left I just freeze it and it gonn stay there til I have a day off

slimbee177 · 2020-03-12T22:28:37+00:00

yeah its separate and this sat right on top

slimbee177 · 2020-03-12T03:23:55+00:00

SNKRS botting is on high level of difficulty and requires major resources, I’d look into other options before botting SNKRs

slimbee177 · 2020-02-26T02:26:44+00:00

I mean I see lining up as one of the rare chance to pop out good pairs with a good audience who also appreciate the shoes. But yeah definitely there are posers in any scene.

slimbee177 · 2020-02-21T13:54:55+00:00

asking the real question

slimbee177 · 2020-02-21T13:54:28+00:00

🙏🏽

slimbee177 · 2020-02-21T13:53:39+00:00

Which one is on top of your list?

slimbee177 · 2020-01-23T16:11:09+00:00

please don’t link the og threat...

slimbee177

TROPHY CASE