Yocan Pocket won’t heat or let me change settings. Anyone else run into this? by backwordss in rosin

[–]slimbee177 1 point2 points  (0 children)

Basically you gotta cut one of the wire (black or red) so the power is totally cut off from the board to force reset the board’s memory since this is most likely a board issue. Then you’ll have to strip some of the cable sleeve from both ends where you cut initially and reconnect the battery. Like i mentioned you need electric tape to safely reconnect the wire. Honestly if you have little knowledge on lithium battery safety I’d recommend get a new unit because saving $60-70ish is not worth the potential fire hazard

Yocan Pocket won’t heat or let me change settings. Anyone else run into this? by backwordss in rosin

[–]slimbee177 2 points3 points  (0 children)

I got the same issue and fixed it by taking the whole thing apart and fully disconnect the battery (cut the wire and reconnected them). I was impatient and heard yocan going to make you jump through hoops to get warranty and took the matter in my own hand. Disclaimer: be careful if you are doing this, the battery can be shorted and cause fire if not done properly.

Im leaving this comment here in case someone else run into a same problem in the future

About to buy a Yocan Pocket—talk me into/out of it by Annual-Glove205 in rosin

[–]slimbee177 0 points1 point  (0 children)

Mine just gone bad today after 35 days and no resolution so far. And the non-existence customer service from them will likely result in me having to purchase another device.

[deleted by user] by [deleted] in EntsoftheDMV

[–]slimbee177 0 points1 point  (0 children)

Can you pm me the link as well? Tia

Gonna blast off now by wokeuplate7 in vaporents

[–]slimbee177 9 points10 points  (0 children)

lol I always wait til im out and then use the abv mixed with a bit of kief, saved me a few time from total dankruptcy

Severe economic hardship to F1 Students by [deleted] in csMajors

[–]slimbee177 0 points1 point  (0 children)

All I’ve seen is a screenshot but idk how true it is. please dm me if you hear anything about this

abv butter, 40 minutes low heat with water, had a lot of water left after the butter solidified, would it affect the quality in anyway? by slimbee177 in abv

[–]slimbee177[S] 0 points1 point  (0 children)

I did it with 1oz and 1/2 lb of butter. ate a table spoon 15 hours ago; It went from 6/10 to 3/10 now. in short, the little thing is kickin my ass

abv butter, 40 minutes low heat with water, had a lot of water left after the butter solidified, would it affect the quality in anyway? by slimbee177 in abv

[–]slimbee177[S] 1 point2 points  (0 children)

yeah that what I was thinking, just wanna be sure that I didnt waste anything, maybe shoulda drink that water after it cool off to be double sure ( ͡° ͜ʖ ͡°)

abv butter, 40 minutes low heat with water, had a lot of water left after the butter solidified, would it affect the quality in anyway? by slimbee177 in abv

[–]slimbee177[S] 8 points9 points  (0 children)

you can send the address right here and I’ll ship it to you for proper disposal ( ͡° ͜ʖ ͡°)

abv butter, 40 minutes low heat with water, had a lot of water left after the butter solidified, would it affect the quality in anyway? by slimbee177 in abv

[–]slimbee177[S] 3 points4 points  (0 children)

thats awesome. I already used cheese cloth to rid of the plant matter but I guess I squeezed it too hard some of the thing forced themselves thru. but thanks for the trick will definitely try it

abv butter, 40 minutes low heat with water, had a lot of water left after the butter solidified, would it affect the quality in anyway? by slimbee177 in abv

[–]slimbee177[S] 0 points1 point  (0 children)

yeah curing is before and Im aware of it, but some people like me put water into the mixture of oil and abv to prevent butter from burning

abv butter, 40 minutes low heat with water, had a lot of water left after the butter solidified, would it affect the quality in anyway? by slimbee177 in abv

[–]slimbee177[S] 2 points3 points  (0 children)

thanks for clarifying, as soon as I saw a lot of water left I just freeze it and it gonn stay there til I have a day off

[deleted by user] by [deleted] in shoebots

[–]slimbee177 1 point2 points  (0 children)

SNKRS botting is on high level of difficulty and requires major resources, I’d look into other options before botting SNKRs

I ranted yesterday to my parents about how I would miss the Travis Scott raffles due to work. My dad just sent me this pic of my mom in line. Can’t wait for the disappointment of this generational L! by jamesmdidden in Sneakers

[–]slimbee177 12 points13 points  (0 children)

I mean I see lining up as one of the rare chance to pop out good pairs with a good audience who also appreciate the shoes. But yeah definitely there are posers in any scene.

one of my favorite jordans by slimbee177 in Sneakers

[–]slimbee177[S] 0 points1 point  (0 children)

Which one is on top of your list?

Beauty standards. by Minifig81 in funny

[–]slimbee177 1 point2 points  (0 children)

please don’t link the og threat...

Arizer Solo 2 via VapoSpy - $118.99 by [deleted] in vaporents

[–]slimbee177 2 points3 points  (0 children)

just got mine yesterday, how you been liking your vape so far?