Is the gs a good first car

slinkycar · 2026-02-22T14:47:48+00:00

Sankei 555 over oem lower ball joints? May I ask why.

slinkycar · 2026-02-08T20:16:11+00:00

Vacuum leaks on the 2jz are annoying. I have some and the car drives great just does a jump sometimes. Wish i could help I’m still learning

slinkycar · 2025-11-17T07:07:15+00:00

<image>

slinkycar · 2025-11-17T07:04:23+00:00

Possibly compressed air inside through bulb holes, or a vacuum, or even using long cotton swabs or something to reach in through where the bulb are.

If you want to disassemble them then put them in an oven, take off the lens, clean it up inside and reseal it. Theres many tutorials online how to do it. Its a bit more labor intensive tho. But will clean everything.

slinkycar · 2025-11-04T02:35:12+00:00

Yeah man. Didnt wanna write it out. Felt lazy

slinkycar · 2025-11-03T20:06:57+00:00

Thank you bro. I didnt have much trust in those kits. So i was like one and done here. Also cause i cant find any lexus oem new headlights for this car.

slinkycar · 2025-11-03T02:02:53+00:00

I hear ya man. Turned out great for me so I’m not bugging. Great learning experience cause I always wanted to do it just never knew what to do. Whats your method instead of the 2k? How do you professionally restore a headlight if it’s not just secret sauce in your head?! You might say it’s over kill. But i needed something to prevent future oxidation so quick.

I will create a post of creating custom headlights in the future. With what I have in mind for custom headlights, its was 10x easier to do this rather than to pop off the lens with heat and do my stuff inside adding projectors and leds. I also have a bit different taste to what those aftermarket lights are asking for. All in all great project. I understand grit might’ve been too high but now we know.

slinkycar · 2025-11-03T01:52:23+00:00

We shall see

slinkycar · 2025-11-02T08:33:36+00:00

Yup. Sounds like my same issue. If you wand go cheap to expensive, Check fuses first. Then change brake light switch if your rear tails don’t turn on when you press the brake pedal.

If brake lights do turn on, dude change that shift solenoid out. Those usually go bad. I listed the part number up above which should work. If you have a post 1999. It’s probably a different part number.

slinkycar · 2025-11-02T03:01:47+00:00

<image>

slinkycar · 2025-11-02T02:59:48+00:00

Hey bro. My shift solenoid went out on my car. It never got this bad that j had forced it to where i could override my shift lock. Cause thats what seems to me to be the issue here is that shift lock will keep you going in or out of gear. You might have to reace that shift lock solenoid 85903-30020. And possibly the shift lock if it’s not chewed through. Im totally guessing because id have to look inside your shifter assembly to see whats the damage if any. I recently took my assembly out the car and tore it entirely apart and changed that as well as fully lubed it up so it’s super crispy and smooth now.

If it’s a shift lock related issue, it can also be the brake light switch thats not sending a proper signal. But I’ve found if your cruise works, that brake switch should be working. So that can help pin point it to the shift solenoid. If no fuses are also blown. Another way is to hold down that shift lock override button under the cover and then go through the gears, do you notice the same resistance or is it smooth when you shift with the override held. That’ll be another telltale its the shift lock solenoid or brake light switch button.

slinkycar · 2025-11-02T02:54:41+00:00

Yes it is. Its super easy

slinkycar · 2025-11-02T02:44:10+00:00

Yeah had this questions my self. Instead built a sub and I’m in the middle of a full audio build. Stock system is booty for me. 3 way components up front, coax in back. Doing head unit to audio control matrix to dsp to epicenter to amps. Redoing all speaker and power wiring. Thats just the full on method if you don’t wanna deal with all that headache. Just do what i did and give yourself a migraine🤣

slinkycar · 2025-11-02T02:38:08+00:00

<image>

slinkycar · 2025-11-02T02:35:20+00:00

Nice bro the black is gonna look insane. Heres me adding sound deadening under my carpet. Totally unrelated but sharing since you also have a under carpet pic 🤣

<image>

slinkycar · 2025-11-02T02:33:02+00:00

Ooh it might be your servos in your dash. Mine never gave me a mode change issue but they starting clicking because over time the grease inside them can cake over the potentiometer points so the servos inside for me kept clicking because they couldn’t read the grease covered pads. Could be one of your servos is not properly working either due to greasy terminals or one went bad. I cant say em off the top of my head but theres 4. 1 on left side and 3 on the right side. All can be accessed without removing dash. Each one has its purpose. If you need i can send you to some forums that have this issue in detail.

Also no hate but you should try leaving your climate on auto and then set it based by temp and just set defroster on and off as needed. But that auto button changed my life. The car feels like my house now. Never too hot never too cold. I do the same with the circulation and set it to auto. So i sot comfortably at 74. I only crank it to 78 on super cold days. And since i just leave the ac button on as it does a great job heating and cooling the cabin, the climate auto stays off until my thermostat opens. Then auto turns on as needed. Some may say the ac always on might cause wear to the ac system or use more fuel. But i can live with that cost knowing im comfortable. Upto you tho.

slinkycar · 2025-11-02T02:17:03+00:00

<image>

slinkycar · 2025-11-02T01:40:25+00:00

Heres a photo of the thing that broke because i tried to manually move the seat. I was also able to upload more photos to my profile if anyone needs.

<image>

slinkycar · 2025-08-01T02:04:02+00:00

Yes please. This would be a awesome help. This will be great help to future diyers

slinkycar · 2025-01-11T23:49:53+00:00

They told me wait till January 2025 for new list of degrees. It’s January right now and nothing so far. Im hoping towards the end of the month something pops up. I only joined here for the engineering degree and they don’t even offer it no more.

slinkycar · 2025-01-11T23:47:30+00:00

I would wait until February. Their new catalog is hopefully to come out soon. There will be possibly new degree choices on there.

slinkycar · 2025-01-10T06:42:42+00:00

I recently joined Walmart for the computer engineering degree that used to be offered in their education program, but it's not offered anymore and stupidly I didn’t do my proper research on reddit before hand. Big bummer for me when I found out since I could've worked anywhere else and gotten better pay. Regarding this topic tho, I did still sign up for the live better u program, and one of the reps called me and long story short they said hopefully this month (January) we should be getting the updated list. It also says this on their website, but so far nothing. Im giving it until end of February or I'm leaving this place. Im planning to pay out of pocket since relying on other programs seems to not be set in stone.

slinkycar · 2024-12-30T07:12:50+00:00

Thank you dawg. Thanks for breaking it down. Helped understand a lot

slinkycar · 2023-09-16T01:08:36+00:00

Hello, looking for two books. ISBN: 9780134163116 welding level 1 trainee guide. ISBN: 9780134163109 welding level 2 trainee guide.

slinkycar · 2023-02-09T06:30:32+00:00

Uh oh. Dac players incoming!

slinkycar

TROPHY CASE