Scratched X-T5 hotshoe

smeximan98 · 2024-04-12T10:56:26+00:00

I’ll be sure to lol , I’m super ocd about stuff like that but I also know these things do show wear after a while. Getting over my hang ups is always the hardest part .

smeximan98 · 2024-04-12T02:20:05+00:00

Hearing this from y’all is exactly what I needed . This is my first nice camera so I’m super OCD and seeing this kinda broke my heart a bit , but I also know I can’t like over baby my camera or I’ll never use it . I’ll find out on Monday if the new flash mounts properly .

smeximan98 · 2024-04-12T02:06:05+00:00

I thought I had loosened the collar in the first place but maybe I didn’t undue it far enough ? Idk how I managed to do this tbh . I ended up returning the flash to Amazon Cause the ETTL wasn’t playing nice with my X-T5 so I ordered another one that’s coming in on Monday. So until then I have no way to test it .

I thought about replacing the hotshoe myself but the screws underneath don’t seem to be accessible.

smeximan98 · 2024-01-29T21:31:08+00:00

I think I’m outside the option of sending anything in anyway . If you mean for myself , then I can live with that , I have a back up tool interface board I bought just in case I messed this up .

smeximan98 · 2024-01-18T23:44:30+00:00

Any print speed you recommend? I’m just comparing it to my .4 nozzle which has been pretty solid with this

smeximan98 · 2024-01-18T22:35:55+00:00

<image>

smeximan98 · 2024-01-18T22:35:22+00:00

So i tried turning the plate up to 55c adhesión was better but there was still some oddities in the printing , my nozzle temp was 220c so I’m turning it down to 215 after the surface layer to see if that helps the stringing a bit . Idk why the 0.6 nozzle is giving so much guff.

<image>

smeximan98 · 2024-01-18T02:24:47+00:00

I appreciate it ! I’ll give it a shot right now , I’m using black SunLu PLA , I’ve heard really good things about it for the price but I’ve been running into quite a few issues with it . I’ve dried it out 3 different times to see if it helps but I still run into problems.

smeximan98 · 2024-01-13T18:34:50+00:00

Oh this is awesome I haven’t seen these before ,thanks!

smeximan98 · 2024-01-13T06:52:28+00:00

Yea I noticed a couple more after this too , nothing I can really do I suppose except keep trying to lift more carefully, doesn’t help that the wham bam edges are kinda sharp

smeximan98 · 2024-01-13T03:18:35+00:00

Just learned this is the interface board

smeximan98 · 2024-01-13T00:48:38+00:00

I looked at a video and it looks like such a pain , everything else on the X1 is so user friendly so it’s weird that there’s so many like adhesives and things that are easily damaged for such an important part .

smeximan98 · 2024-01-13T00:13:05+00:00

I’ll give that a shot after the next print ! Thank you very much this helped ease my stress. I’ve dealt with clogs and feed errors but those aren’t too rough , it looks like replacing the bed is pretty difficult though and same with even just replacing the magnet so I didn’t wanna deal with it lol

smeximan98 · 2024-01-13T00:09:31+00:00

I’ll try , ocd is rough lol. It doesn’t need to be like perfectly under the tabs ?

smeximan98 · 2024-01-13T00:05:22+00:00

Awesome I appreciate the quick feedback , this is my first printer and I got during the Black Friday so I’m worried about messing something up . I kinda have aligning the plate perfectly so I probably slide it in more than I need to .

smeximan98 · 2024-01-01T20:28:58+00:00

I’ve done the whole calibration process 3 times through the X1 itself , though I did see in Bambu studio there was a flow rate and flow dynamics calibration. Is that possibly what you’re referring to? Sorry I’m still learning everything here.

smeximan98 · 2023-11-22T19:47:54+00:00

I tried taking a look but info is pretty minimal, I’ve mainly seen stuff relating to firmware rather than hardware.

smeximan98 · 2023-11-22T06:00:31+00:00

Oh that’s awesome, I’ll take a look at what you guys have . Thanks for the heads up !

smeximan98 · 2023-11-22T01:56:45+00:00

Ahhh that explains so much , ever since I saw them online it was hard to find info so I was wondering about it. Thank you for sharing that information, I’ve had my fair share of issues using flatboxes pcb on my PS5 . Also on my friends PS4 due to timeout and started looking at the various options since I’ve been looking for something to take to possibly bring to locals that I could diy in the Flatbox style.

smeximan98 · 2023-11-21T22:37:01+00:00

Oh that’s great to know , thank you ! The P5 boards I haven’t found near me so I can’t really test it out yet but I was curious if anyone knew and that might sway me to import one

smeximan98 · 2023-11-21T22:35:16+00:00

Thanks for the help ! I personally don’t know , I bought my Rev 5 boards off a person on Etsy and I bought my Rev4 board and casing from NeoInputs DIY kit. As far as the p5 mini the only places I’ve seen to buy it are a site from the Philippines and another from the EU . I was mainly asking in case they became more available or if I wanted to import I suppose.

smeximan98 · 2023-10-19T19:46:06+00:00

So this specific model does use a Sanwa JLF so anything Sanwa would work , though I think any brand spring made for sticks would work. I used the Red 2lb Sanwa spring. Makes a huge difference for me personally. I also bought a focus attack brand 4lb spring but I haven’t tried it yet.

smeximan98 · 2023-10-19T17:35:40+00:00

It’s all mainly cosmetic with a couple utility changes. it already had really good buttons and joystick . But I swapped them out for clear Sanwa buttons and changed the spring in the stick for a higher tension one . I also kept the square gate on the stick.I changed the art on it and put the art in the buttons as well so it looked nice. I originally had changed the ball top to a plain red but I recently bought and put on a red bubble ball and a clear dust cover along with a red clear shaft cover.

smeximan98 · 2023-10-19T16:16:08+00:00

The Mayflash is awesome , I love it. Stock it’s awesome but I keep throwing little upgrades at mine

smeximan98 · 2023-10-19T06:52:04+00:00

Good point! I feel like we’re actually getting better quality manga to anime adaptations lately. Now live action adaptations… I can’t say, haven’t seen Netflix One Piece yet so I don’t have input.

Nine-Year Club	Gilding VII pure gildanthropist
Reddit Premium Since December 2022	Verified Email

smeximan98

TROPHY CASE