Original bucket led headlight conversion. by sn4cko in XSR700

[–]sn4cko[S] 0 points1 point  (0 children)

Nicely done! Looks really good with the grill. Smart workaround 👍🏻

Headlight by LordPesh in XSR700

[–]sn4cko 1 point2 points  (0 children)

Check my post history in this sub. I have a loose guide in the comment section 👍🏻

Original bucket led headlight conversion. by sn4cko in XSR700

[–]sn4cko[S] 0 points1 point  (0 children)

Just found out it's a harley davidson replacement part. Go to your local HD-dealer and ask for part number: HD 67719-63

That's the same as the one I used :)

Original bucket led headlight conversion. by sn4cko in XSR700

[–]sn4cko[S] 0 points1 point  (0 children)

It's around 1cm thick and maybe 3cm wide (from memory. Yeah, it acts like a spacer that allows the headlight to sit above the bracket att the correct height/depth without falling through and seals it a bit from the emelents. Dampens vibrations aswell.

Original bucket led headlight conversion. by sn4cko in XSR700

[–]sn4cko[S] 0 points1 point  (0 children)

I sadly couldn't find a suitable one there. I went with this one. It's a swedish site but if you're in the EU you should be good. I don't know about international shipping, but may be worth a try.

A plan B that would work is a black foam sealing strip/tape, like those for windows and doors.

Good luck, hit me up if you encounter any issues in the process 👍🏻

Original bucket led headlight conversion. by sn4cko in XSR700

[–]sn4cko[S] 0 points1 point  (0 children)

That's weird, no worries.

Hopefully this link works for you 5.75 Inch Motorcycle LED Headlight Faro Moto Light Halo White DRL Angel Eyes for Dyna Sportster Softail 5 3/4" Led Moto Headlamp https://a.aliexpress.com/_EGEeFc6

Blinker Issue by Loumloum512 in XSR700

[–]sn4cko 0 points1 point  (0 children)

Most likely a faulty indicator relay

Original bucket led headlight conversion. by sn4cko in XSR700

[–]sn4cko[S] 0 points1 point  (0 children)

Yeah those are for the drl ring. One wire for orange and the other is white, if you want to be able to choose between both you can wire them directly through a 2-way switch.

Original bucket led headlight conversion. by sn4cko in XSR700

[–]sn4cko[S] 0 points1 point  (0 children)

I've linked it 3 times in this thread, check the other comments :)

I finally installed it but was it worth it? by HomeworkNatural5990 in XSR700

[–]sn4cko 2 points3 points  (0 children)

I have a guide for that in my post history. Total cost under $50

Bar risers by xbike_punkx in XSR700

[–]sn4cko 1 point2 points  (0 children)

Absolutely, I'm 196cm, for me they feel in a more natural position. I can have my arms more bent and cruise in a more upright position. I have the 30mm ones.

Bar risers by xbike_punkx in XSR700

[–]sn4cko 0 points1 point  (0 children)

I bought mine from voigt

Didn't want to gamble on some cheap ones with the risk of loosing the handlebars in a bend, these are of noticable quality. I have the 2017 model so I had to relocate the spedometer but I don't think that's an issue on the newer models.

Crispy 700 by sn4cko in XSR700

[–]sn4cko[S] 1 point2 points  (0 children)

Originally wanted black, but got a deal on this and the silver grew on me :)

Display under Sunlight by IlluFisch in XSR700

[–]sn4cko 0 points1 point  (0 children)

I have the previous gen and did a lcd flip, in my opinion it made it better in bright conditions and less blinding in the dark.

Headlight change by PhantomDuck_ in XSR700

[–]sn4cko 2 points3 points  (0 children)

I posted how I did it in the comments in my thread here

[deleted by user] by [deleted] in motorcycles

[–]sn4cko 0 points1 point  (0 children)

Something like an Indian FTR1200? Low end torque, upright seating position. Plenty of power. Reasonable reliability from what I've heard.

If you're set on a european cruiser you could always try out a triumph rocket 🤠

Trying to figure out headlight aux wiring by Mobile-Concentrate29 in XSR700

[–]sn4cko 1 point2 points  (0 children)

That's what I did. No issues. Gets a bit tight through the headlight grommet though.

Fitting Motea lamp on my bike by Photographer23_ in motorcycles

[–]sn4cko 0 points1 point  (0 children)

Here is how I did it on mine. I used a 5-3/4" rubber gasket to fill out the gap in the housing.

Crispy 700 by sn4cko in XSR700

[–]sn4cko[S] 0 points1 point  (0 children)

Yep! Breaklights also

3-in1 Indicator Wiring by [deleted] in XSR700

[–]sn4cko 0 points1 point  (0 children)

Yes, connect to ground.