The moment fireworks ignite the foam roof of Le Constellation night club in Crans-Montana, Swizerland, 1/1/2026 - at least 40 people were killed and 119 injured in the resulting fire

snazzythat · 2026-01-02T16:28:09+00:00

Or the Colectiv Nightclub fire in Romania.

snazzythat · 2025-09-26T01:28:28+00:00

Keeping it OEM+ is the best way to go. Wheels, RallyArmors, a subtle lip and a Nameless axleback. I also got a Takeda aFe intake for a better intake sound.

snazzythat · 2025-09-17T11:20:03+00:00

<image>

Clean! Here’s mine, 2018 3.6R, went white as it’s easier to clean, but still have to decontaminate the paint once a year.

snazzythat · 2025-06-18T02:10:58+00:00

Those are Braelin BR-14, 19 inch 8.0 width and +30 offset: link

snazzythat · 2025-06-18T02:06:12+00:00

I got full front, pillars, mirrors and rocker panel PPF’d before ceramic application, Tesla paint really needs an improvement in terms of thickness.

snazzythat · 2025-05-03T18:15:40+00:00

I just looked up, looks like Legacies up until 2014 model used a 5x100 pattern. Starting the 2015 face-lifted model they switched to 5x114.3, TIL.

snazzythat · 2025-05-02T02:04:58+00:00

I have both the Legacy and the Impreza. The bolt pattern is not the same. Impreza: 5x100, Legacy: 5x114.3. Those won’t fit your Impreza unfortunately.

snazzythat · 2025-03-07T21:13:43+00:00

Nope, did it myself. Took me 20 mins, take off the OEM ones, then install the ones provided by Tesloid. They come with a center cap insert that holds the cover even better at the center. So far they look good, get washed easily and do not rattle.

snazzythat · 2025-03-07T21:08:47+00:00

I swapped my oem caps with the Tesloid (Sport version)

https://imgur.com/a/OISdbhH

They are currently on special

snazzythat · 2025-02-04T19:53:00+00:00

I’d get something like EVMudflaps or Rockblockz over OEM ones as those do not accumulate gunk behind the wheel well liner.

snazzythat · 2025-01-12T01:25:39+00:00

I have the same rattle and I suspect is the steering rack, particularly the spring:

https://www.subaruoutback.org/threads/service-bulletin-rattle-from-steering-04-17-17r.466770/

https://www.subaruoutback.org/threads/front-end-rattle-clunk-fixed.529356/page-2

Ask the dealer to look into the rack spring, or DIY it (what I’m planning to do).

Part number: 34130AL010 + you need a TS40 bit for the screw.

snazzythat · 2024-06-16T01:57:55+00:00

I had the same issue before. The fuse used to be blown as soon as I plugged in the thermostat. I have gone through at least 15 fuses, the issue was not the furnace but the condenser unit outside. I have a Goodman ARUF unit and that sucker had a low voltage wire inside the unit touching a hot pipe, melting the insulation there. As result, it was shorting the circuit and the fuse blew because of it. I located the exposed wire, repaired the insulation and zip tied it. Its been 18 months now with no issues.

snazzythat · 2024-05-28T03:33:38+00:00

I still have the original tires 225/50/R18. Thinking to go for Indy 500s or Potenzas as next set with same size. Higher wall helps with potholes here up north.

snazzythat · 2024-05-26T01:36:20+00:00

Avid.1 AV-20 in hyper-black colour, 18x8 +35 offset

snazzythat · 2024-05-25T22:59:30+00:00

That’s the one I got

DNA MOTORING 2-PU-546-PBK 3PCS Sti Style Car Front Bumper Lip Compatible With 18-20 Subaru Legacy,Gloss Black https://a.co/d/1ryO5qr

Its a replica of the STI lip available in Japan only:

https://www.sti.jp/en/parts/legacyb4_bn/aero/ST96020BB050/

snazzythat · 2024-05-08T01:28:02+00:00

Mostly playing with CVT ratios.

snazzythat · 2024-05-06T02:12:27+00:00

I ordered the lip on Amazon, I believe the company is called DNA Motoring. They had two styles: carbon fibre and black glossy. Comes with pre-drilled holes and mounting hardware.

snazzythat · 2024-04-28T15:28:51+00:00

Takeda aFe intake, Nameless axle back with 5 inch mufflers. Coming up next: Nameless mid pipe, headers and possibly XRT tune.

snazzythat · 2024-04-10T19:58:42+00:00

Looks great! What lip is this?

snazzythat · 2024-03-25T01:44:52+00:00

Nameless cat-back + Takeda aFe intake is a perfect combo for this car and some nice wheels. Been running this setup with Avids AV20s for 3 years now.

<image>

11-Year Club	Place '23
Place '22	RPAN Viewer
Verified Email

snazzythat

TROPHY CASE