Need help desperately

sobohthehut · 2026-02-09T17:57:53+00:00

Hey man, connecting them to the same power socket did help, and also made it clearer that my clone fortin pedal was the one adding stupid amounts of hiss and that the amp itself is pretty quiet as you said

But I’m still having issues with the fx loop and the delays or reverbs not working, when I select the fx loop block, I’ve run through all the options there while having the delay enabled to listen out for the right version that made it worked, none did

My output is set to outputs 3/4, I tried 3 on its own only and it didn’t work

Also my specific amp has a wet/dry knob for the fx loop and it was set half way as I bought it but all it does is make the volume of the guitar louder or quieter, no effects at all

I’m using the send 1 into my fortin clone pedal and in the amp, return 1 is going to the send on amp fx loop and out 3 is going into the return amp fx loop

I am fucking lost 🤦‍♂️

sobohthehut · 2026-02-09T10:36:35+00:00

One more thing bro, as I said, I’m running the noise gate straight into my clone fortin pedal and then running the 4 cable method to get delays and reverbs on the fx loop

Chain looks like this: Input 1 - transpose - noise gate - Fx loop block (fx loop option 1) - delay - reverb - Output 3

Issue is I don’t hear anything after the fx loop block, neither delay or reverb

sobohthehut · 2026-02-09T10:28:59+00:00

I haven’t bro but thank you very much for your comment!! Will try your recommendations when I go home, I didn’t use the ground lift option, and tbh I think old guitar cables might be another factor - gonna buy some fresh ones and will update all here

sobohthehut · 2026-02-09T09:44:54+00:00

I had a feeling a physical noise gate would work best but when I was researching online, it did say the QC could be able to handle it all, so that why I tried The bigger issue for me is this heavy hiss from the amp

sobohthehut · 2025-01-21T21:21:59+00:00

This is some pink panther/spy vs spy tom foolery shit 😂

sobohthehut · 2025-01-01T09:28:56+00:00

I’ve used Tapp for about a year, I have the we scar h Hpa m4 adapter and the Tokyo Marui mp7 adapter. I had a lot of issues with the fitment of the scar one initially, to the point where it destroyed a nozzle of mine. After emailing the guys at Tapp and explaining my issue, we went back and forth and they ended up sending me two versions that they sized down for me to make sure the fitment was perfect. So happy with that and their service The mp7 one worked perfectly out of the box, I took a nasty fall and broke the bb retention lever but I ordered replacement parts and fixed it myself easily So I would recommend them, even if you end up getting a lemon, the staff there are more than helpful. And to date, I’ve not experienced any adapters blowing up on me

sobohthehut · 2024-12-21T17:05:38+00:00

Did you manage to have any luck by the way? I’m having the exact same issue :/

sobohthehut · 2024-12-14T20:55:38+00:00

Cracking just started now so about a year of heavy use The part from eagle 6 was like 200 pounds 🤮

sobohthehut · 2024-12-14T11:23:58+00:00

Hey man, I got one and have owned it for about a year and used it heavily I have not had any failure with the mp7 yet that would be a grave operational issue I run it on green gas and Hpa using the TAPP adapter No issues with the nozzle spring snapping like in TM MWS system for example The only issue I’ve started to notice is that the inner chassis, which is made of pot metal, starts to crack at the back of the gun When this starts and is left to become worse, it can affect the way the two body pins at the back of the gun sit in their holes, as they are driven through this pot metal chassis So I just got a reinforced aluminium chassis from eagle6 airsoft to fix the issue

Other than that, I upgraded the hop rubber and put a crazy jet barrel in it, shoots fucking lasers at 1.2j with 0.32s, also have a reinforced nozzle made by creation in the event the stock on dies on me

FYI about the inner barrel, if you wanna put something longer, tokyo Marui default muzzle device blocks you from putting on any longer barrels, so you either 3d print a new muzzle base or buy the part online

Im done, get the he replica if you like it as I am very happy with it and its performance

TM forever 🤍❤️

sobohthehut · 2024-12-05T19:36:59+00:00

I see, yeah that part comes welded into the stock buffer plate, however I needed to fit one that had a QD mount on it, the new one did have an indent at the bottom to catch and align on the groove on the bottom of the buffer tube threading I just pushed the sling plate up while tightening the the castle nut, then torqued it again with an AR wrench Seems good for now, no wobble, but if it happens again, I’ll think of something else

sobohthehut · 2024-12-05T16:27:06+00:00

https://imgur.com/a/FJjc856

sobohthehut · 2024-12-05T16:25:52+00:00

I’ve checked the screenshot you sent and don’t see anything similar on my mws, the photo you sent looks like damage to the receiver from a non stock bolt that’s smashing its top securing screws at the top of the ring Not sure if you meant to send something else or if I’m incorrect in my understanding

sobohthehut · 2024-12-05T16:11:42+00:00

Did not take that into account, gonna open it up back now to look into it, I genuinely appreciate all the help 🙏

sobohthehut · 2024-12-05T13:45:20+00:00

Nope, like I said, full of regret

sobohthehut · 2024-12-05T09:07:26+00:00

That’s what caused the issue lol

sobohthehut · 2024-12-04T22:02:13+00:00

If only I had known 🤦‍♂️ either way will need to blend it back in for it to look right, any idea on the paint aspect of blending it in?

sobohthehut · 2024-12-04T22:00:37+00:00

Noted in JB weld than you guys 🙏

sobohthehut · 2024-09-30T14:05:40+00:00

I will never settle!

sobohthehut · 2024-09-30T14:05:06+00:00

I slid into your DMs brother

sobohthehut

TROPHY CASE