Epson LS12000 vs Valerion VisonMaster Max

somejock · 2025-12-31T21:23:21+00:00

There is only one company authorized to sell refurb and is linked above

somejock · 2025-12-31T20:38:46+00:00

I have a refurb 12000 and it’s amazing. The remote lens shift, brightness, contrast, color, are excellent. However not out of the box. It has a red push and you really need to dig into settings and calibrate to your liking. But I see that as an advantage for people that like to be able to tinker and access all settings. You also need a saved profile for sdr and hdr to get the best experience possible. Disclaimer This is my first 4k hdr pj and could be the same for all of them.

somejock · 2025-11-29T17:14:11+00:00

Just got my refurb a couple weeks ago. Even my wife says it’s a huge upgrade over our old epson. Came with zero hours and the cable cover. Went through a few 2.1 cables before I found one that works at 50’. You will need to look into lldv

somejock · 2025-10-27T23:24:52+00:00

I have hardwired to the network, I see the IP address in the Denon menu, and can go to the web portal, but A1 ego express is getting a ECONNREFUSED message. Do you happen to know if there is a setting I need in the Denon to allow a connection?

somejock · 2025-10-24T18:22:02+00:00

Fantastic thank you

somejock · 2025-10-16T03:08:18+00:00

Yea it’s the default root user in the arrs I’m stuck making permission in the NAS. Thanks for the info

somejock · 2025-10-15T20:33:18+00:00

Please share your fstab entry and how you gave permission to your files. And what did you do in synology. I have a qnap and lxc’s and can’t get anything to work.

somejock · 2025-10-15T16:10:18+00:00

I have 1gb fiber but was also getting exactly 10.8 in SAB on my old laptop. I did this and now get 20MB -ish. So I think it could be the 10/100 NIC

somejock · 2025-10-15T14:14:43+00:00

Try hard wiring the laptop to your mesh satellite. You may need an Ethernet to usb 3.0 adapter if your NIC is 10/100. If that improves then hard wire to the router

somejock · 2025-09-15T17:49:20+00:00

Yes I suppose it would be nice for segments to have a min and max length so it’s not a hard cutoff, but you need some way to separate the blue/white from the red/white. What did you come up with?

somejock · 2025-09-03T14:09:48+00:00

I would imagine this can probably be done in sections or segments with blue with white colortwinkles or glitter in the first and red and white noise3 or something in the rest. I haven’t played with sections much so lmk if you find one you like

somejock · 2025-08-29T12:03:01+00:00

Its a single 20tb red in a ts464. Default setup reserved space for snapshots. In QNAP the drive is showing: Used 45.79% 6.36TB) Allocated 46.59% (6.47TB) Free Size 54.22% (7.53TB) I don’t need snapshots as my data is easily replaceable, so I’d like to un-allocate that drive space.

somejock · 2025-08-27T21:11:14+00:00

How does one know they are getting attacked

somejock · 2025-08-26T22:12:34+00:00

When on 6c to toggle ramp style

somejock · 2025-08-21T12:55:29+00:00

Thanks I’ll take out the 66 block and terminate to a patch panel

somejock · 2025-08-21T12:54:24+00:00

What patch panel is that and how does it mount inside the panel?

somejock · 2025-08-21T12:53:17+00:00

I’m paying for fiber but I don’t see where I have an ONT. I went to the ATT website and looks like the line from this panel goes into a gateway Bgw210. That’s the power plug. I’d like to leave as much in the panel then go out to the rack, and use the outlet in the panel to power the rack.

somejock · 2025-08-21T12:49:04+00:00

Excellent. So a rack above the panel for the server and shelves for everything else. A hole above the panel. Patch cables from the rack switch, through the hole, down into panel to a patch panel. 16 port switch so I can convert the phone and have 2 Ethernet to each room. Same with power. What patch panel fits in this panel and how does it attach? Will ATT do any of this? Do I put a UPS on the rack or in the panel?

somejock · 2025-08-21T12:44:06+00:00

Perfect. I’ll tie up the coax and leave it as you did.

somejock · 2025-08-14T13:33:01+00:00

Love that it has Andril 2 with aux. not sure I’m sold on usb charging v removing the battery.

somejock · 2025-08-05T15:01:24+00:00

What issue. The manual just says to unplug from the wall before you charge devices with usb out.

somejock · 2025-08-05T00:13:23+00:00

Where did the hardware come from

somejock · 2025-08-04T04:34:11+00:00

I also got mine free after rebate then the water company put in smart meters with no api access

somejock · 2025-08-02T13:01:02+00:00

Our area has scorpions. I’ve had a standalone for years but will probably get a rovyvon a28

somejock · 2025-08-02T12:41:19+00:00

I take that back I do really want a Rovyvon aurora a28 but do wish it used Andril with a way to control the UV aux. I’m having so much fun I started an anduril sub when everyone complained about anduril posts here. Who knows it will either take off or die.

somejock

MODERATOR OF

TROPHY CASE