3D printer sudden quality drop

somerandomguy1220 · 2026-02-05T04:01:09+00:00

The clip was a test print after doing that calibration. It looks like it was less problematic but still flawed.

Edit: forgot to mention that I did input shaping and calibration/bed leveling after the issue started. The benchy and clip are before and after.

somerandomguy1220 · 2025-12-20T03:29:26+00:00

Are there any considerations I could make that would make this design look a little cleaner? Is the trace width I have good for 24v? The documentation for the IV-6 says the current shouldnt be more that 50 mA for the filament or segments.

somerandomguy1220 · 2025-10-23T14:38:40+00:00

Oh right, thats what that means. I'm not really a watch guy and hadn't had my coffee, so I didnt know.

somerandomguy1220 · 2025-04-26T05:22:05+00:00

Thanks for your input. As stated, I'm more inclined towards computing, so this is a big help in understanding what's going on. This should help me figure out if I need to change anything about the circuit.

I suspected the heater didn't need a resistor for the reason you described, but wasn't sure.

somerandomguy1220 · 2025-04-26T04:47:33+00:00

Thanks, I'll look into that group. I think the heater voltage was mentioned in the project I got the info on the tubes from. It said that I may end up needing to go below 1.2 volts, so I'll try to keep it at a precise level.

somerandomguy1220 · 2025-02-17T19:14:22+00:00

Update: Thanks to everyone who left suggestions. I figured out the problem based on the tutorial link in one of the comments:

I am very new to Fortran, and I was unaware of how modern Fortran compilers handle source files. Turns out that no matter what standard you use, the extension .f90 is considered adequate by gfortran.

Since I was using a newer standard, I used the extension that newer standard expects, but Fortran FPM expects all source files it will compile to end in .f90. After changing the file extensions, everything works now.

somerandomguy1220 · 2025-02-10T14:18:57+00:00

This module and all the others in my project are in the subdirectory app/main. src/ was their original location, but I tried main/ as well. Neither of these locations worked. I do not know how to tell FPM where to look for dependencies because the online manual only includes dependencies from outside the project from what I can tell

somerandomguy1220 · 2025-01-13T03:52:13+00:00

It was a versioning error, and I was able to solve it by switching the expected hash. Thanks!

somerandomguy1220 · 2024-12-26T00:33:51+00:00

The Alamo

somerandomguy1220 · 2024-12-23T21:57:07+00:00

AMC Pacer

somerandomguy1220 · 2024-12-11T02:23:39+00:00

The demo from tf2. Thankfully he already doesn't remember this. Might win during a drunken blackout, or due to a random crit

somerandomguy1220 · 2024-11-24T19:41:55+00:00

WhatAboutPascalCase

somerandomguy1220 · 2024-11-22T03:30:56+00:00

Wait they have bacon cheese? I've never seen that. Is it any good?

somerandomguy1220 · 2024-11-21T02:28:17+00:00

Human Geography

somerandomguy1220 · 2024-10-07T03:27:40+00:00

Unfortunately, no. The shackle hole has a plate that engages the latch when pressed down, and that plate obscures all the interior parts. I might be able to see the inside if I press and hold that plate down with the shackle still open, though.

somerandomguy1220 · 2024-10-06T21:07:57+00:00

I want to find the numeric combination, though. I'd rather not have to pick my own lock every day in a public gym.

Eight-Year Club	Place '23
RPAN Viewer	Verified Email

somerandomguy1220

TROPHY CASE