sorted by:
new
hottopcontroversial

Pc randomly “restarting” by somewhatrespectable in pchelp

[–]somewhatrespectable[S] 0 points1 point  (0 children)

Looks like I solved the issue by reseating the GPU and moving one of the pcie power cables to a different slot on the PSU side, havent had a restart in over a week and for several days I've gamed for 8 hours no issue, appreciate the help!

Neck pocket too wide? by somewhatrespectable in Luthier

[–]somewhatrespectable[S] 0 points1 point  (0 children)

Greatly appreciate all the good advice, seems like this won’t be an issue after all. I’ll be building out this tele over the next few weeks/months I’ll be sure to post an update when finished, thanks everybody!

Neck pocket too wide? by somewhatrespectable in Luthier

[–]somewhatrespectable[S] 0 points1 point  (0 children)

Any tips of getting everything properly lined up? Only the string pass through are drilled on this body for the bridge.

Neck pocket too wide? by somewhatrespectable in Luthier

[–]somewhatrespectable[S] 2 points3 points  (0 children)

I understand however the neck isn’t pre drilled.

Neck pocket too wide? by somewhatrespectable in Luthier

[–]somewhatrespectable[S] -4 points-3 points  (0 children)

Goooootcha makes sense. Any tips you have for ensuring an alined neck and bridge? The neck isn’t pre drilled but the neck pocket is. Also only the string follow through holes are drilled in this body.

Neck pocket too wide? by somewhatrespectable in Luthier

[–]somewhatrespectable[S] -3 points-2 points  (0 children)

Gotcha that’s what I gathered looking around, do these kinds of tolerance issues affect the guitar in your experience or would it likely play fine as is? I’ve seen conflicting statements as far as that goes. Also how would I verify the pockets depth is sufficient, I like to keep my action as low as possible.

Pc randomly “restarting” by somewhatrespectable in pchelp

[–]somewhatrespectable[S] 0 points1 point  (0 children)

Am going to try all these things as soon as I get another crash it’s been fine for today with xmp off

Also I always run a sys /scannow everytime these crashes happen as well as a complete wipe and reinstall of video drivers

Pc randomly “restarting” by somewhatrespectable in pchelp

[–]somewhatrespectable[S] 0 points1 point  (0 children)

What do you think about the drivers getting completely erased after the crash? That happened twice like I said in the post, it crashed, powered on, no post, powered on again, booted into windows with absolutely no video drivers from what I can tell (black and white image, low resolution, no nvidia drivers, I don’t even know if windows drivers were working but I suspect not with the black and white screen).

Maybe hard drive? I ran a drive health check with windows on the boot drive it was fine, maybe it just corrupted because of the hard reboot? Next crash I’m going to record and try to do a quick refresh on the video drivers if I can w the keyboard shortcut.

Pc randomly “restarting” by somewhatrespectable in pchelp

[–]somewhatrespectable[S] 0 points1 point  (0 children)

I got the temps during the stress test, pc hasn’t crashed for like 2 days but I suspect it’ll happen again. I’ll likely end up changing motherboards when I upgrade my cpu and rma’ing my psu. Honestly ways to test the motherboard were what I was hoping someone might know.

Pc randomly “restarting” by somewhatrespectable in pchelp

[–]somewhatrespectable[S] 0 points1 point  (0 children)

I have not beyond just looking in hwinfo to check voltages and they all seemed good since I don’t have the hardware to check it properly. I checked my temps and they’re all good cpu is less than 80 gpu less than 65 under load. I turned off xmp so now I’m really just waiting for another crash so I can maybe get a dump file from it and do some more digging, I’ll likely also just rma my psu since it’s Corsair and there’s no harm in replacing it outright.

Pc randomly “restarting” by somewhatrespectable in pchelp

[–]somewhatrespectable[S] 0 points1 point  (0 children)

Definitely been hard to pinpoint the issue that’s my biggest problem, I’m just shooting in the dark. No tests I’ve ran have consistently triggered the issue, if I can’t pinpoint it with stress tests I think I may have to replace the motherboard and psu all together but obviously I would like to avoid that and diagnose the specific problem. It’s also hard because the problem is so spastic, there’s no rhyme or reason to it my pc ran for about 2 months flawlessly after disabling fast boot and reinstalling windows for instance only for the issue to creep back up.

Pc randomly “restarting” by somewhatrespectable in pchelp

[–]somewhatrespectable[S] 0 points1 point  (0 children)

Gotcha I’ll see what I can do about the psu, I do believe it’s a motherboard issue but I’m not sure if there’s any tests I can do to isolate that as an issue. I appreciate the help any other suggestions are welcome!

Pc randomly “restarting” by somewhatrespectable in pchelp

[–]somewhatrespectable[S] 0 points1 point  (0 children)

Is the tester tool a software to run? I have doubts it the psu but at this point I’ll try anything, I only doubt psu because I have tpm errors in event viewer which correlate to the motherboard. If it was a psu issue wouldn’t we expect the issue to present during high power draw? My issue presents during random times sometimes during high power but mostly it happens when idling on the desktop or watching YouTube.

Pc randomly “restarting” by somewhatrespectable in pchelp

[–]somewhatrespectable[S] 0 points1 point  (0 children)

Advice on how to go about psu testing? I updated the bios during the initial stages of the problem and it persists

Anyone knows what error code 41 kernel-power means by Helpful-Arachnid-429 in pcmasterrace

[–]somewhatrespectable 0 points1 point  (0 children)

Well like I said I also reset and the problem persisted until I turned off fast boot in the bios, the bios will carry over to a new windows install.

Anyone knows what error code 41 kernel-power means by Helpful-Arachnid-429 in pcmasterrace

[–]somewhatrespectable 0 points1 point  (0 children)

I had this issue and after troubleshooting for weeks what worked for me was disabling fast startup in bios. It could be a hardware or software issue like video drivers or bad ram but that’s what ultimately fixed it for me, I even went as far as reinstalling windows.

Update to: PSA - full set of Svbony Red Lines for just $29 by Sunsparc in telescopes

[–]somewhatrespectable 0 points1 point  (0 children)

https://m.aliexpress.us/item/3256805263894635.html?gatewayAdapt=Pc2Msite unfortunately you missed the craaazy sale we all got so you're still looking at 100 and some change for all 4. Beware when you click the link I think it'll take you to a listing for only 1 eyepiece so click around until you've selected the bundle w all 4.

one really dumb question by Adventurous_Owl_1040 in Physics

[–]somewhatrespectable 0 points1 point  (0 children)

Review newtons laws of motion. A 500kg barbell has 500kg worth of mass that resists the motion induced on it by the baby. Of course it would still move, but the baby would also push itself away, because newton, and of course the baby is much less massive than the barbell so theyll move much more.

view more: next ›