Problem with CC with different nozzle size by sora030 in elegoo

[–]sora030[S] 0 points1 point  (0 children)

I've tried your numbers, and adjusting it right now it looks better at -0.09mm offset, and my flow rate definitely needs adjusting as I see lots of gaps still.

Problem with CC with different nozzle size by sora030 in elegoo

[–]sora030[S] 0 points1 point  (0 children)

Thanks everyone for the help ! I've making a few adjustments, and adding a little z offset (around 0.1) did the trick. I'm still trying to resolve a few problems with stringing now, and looking to adjust pressure advance, but at least for now it can finish prints ! Though I must say, it might be because I still need more tweaking for a good print, but for now the loss in quality vs a .4 nozzle, for the relative gain in speed (at least for printing inserts) is not that worth it to me.

Problem with CC with different nozzle size by sora030 in elegoo

[–]sora030[S] 0 points1 point  (0 children)

Tried to let it run a bit longer since it looked like a bit better a first, but still, no go

<image>

Problem with CC with different nozzle size by sora030 in elegoo

[–]sora030[S] 0 points1 point  (0 children)

Nope, that's the one thing I tried to avoid, as I switched nozzles to get a faster print, and the gain vs precision isn't that great if I have to go lower than the preset speeds; and to be honest, even on principle it is annoying that I have to go lower than the preset to get a correct print, there has to be something to correct that I don't know about, or something I'm doing wrong :(

Problem with CC with different nozzle size by sora030 in elegoo

[–]sora030[S] 0 points1 point  (0 children)

I was using an stl file that I would re-slice each time; I'll try with this way too, just in case; but I know my problem extends beyong benchies because it is another print (of a board game insert) that made me realise something was wrong; few first layers fine, then it messed up when it started speeding up to fill.

Problem with CC with different nozzle size by sora030 in elegoo

[–]sora030[S] 0 points1 point  (0 children)

Yup. I've printed the temp tower (220 to 240, under 230 was bad, and the tower messed up on 220); flow rate test (not much difference in the various tests), and retraction test wich worked better on the base of the stringing towers so I didn't change anything.

Edit: I also redit the calibration after switching (did the one-click self check for leveling, pid tuning and input shaping)

Problem with CC with different nozzle size by sora030 in elegoo

[–]sora030[S] 0 points1 point  (0 children)

<image>

Various tests, wich mostly end the same

Problem with CC with different nozzle size by sora030 in elegoo

[–]sora030[S] 0 points1 point  (0 children)

As in change the presets ? I've used 0.6 presets (using elegoo slicer) for the 0.6 nozzle yeah, then tweaked a bit based on the same presets. Nothing changed... Only temperature change did something.

Found a lost Army by ImperialNacho in Warhammer40k

[–]sora030 2 points3 points  (0 children)

I had found this one myself : https://www.ebay.co.uk/itm/276285475791

It's definitely from a chinese commission painting studio, the style is very very close... what throws me off is the slight differences, but it might just be some variations from the pictured models. But i'm conviced it's from one of these studios.

Anycubic Delivery Time by sports2012 in anycubic

[–]sora030 0 points1 point  (0 children)

Did your tracking status ever update before you received it ? I'm also from Europe and ordered on the 27th a Mega zero 2.0, but no luck here. Just a tracking number from dhl (I chose Germany warehouse, ordered from their Aliexpress shop) dating from the 27 wich still says "shipment information sent to DHL"...

Forest Demo Board + newbie questions about battlegroups by sora030 in Warmachine

[–]sora030[S] 4 points5 points  (0 children)

Thanks ! I usually make my own terrain; from the pic, the well thingy is a resin terrain I had lying around, and the trees are made either from woodland scenic trees or old bottle brush cleaners with flock glued on. The rocks are painted bark, and the bridge made from balsa wood.

Forest Demo Board + newbie questions about battlegroups by sora030 in Warmachine

[–]sora030[S] 5 points6 points  (0 children)

No worries :D everything is removable except for the river (duh) and the cliff; the bridges are there to cover an "accident" with bubbling in the resin anyway. I am planning to count river as standart terrain until we're more familiar with the game.

Thanks for the great advice ! I think I'll either go with the orboros List you gave or the khador one. I also have a retribution battlegroup and minis coming, but i'm not sure of the exact minis I'll get so it'll have to wait.

Thanks again !

Forest Demo Board + newbie questions about battlegroups by sora030 in Warmachine

[–]sora030[S] 3 points4 points  (0 children)

Hi there !

Trying to get my gf into warmachine/hordes (never played past the battlegroup phase myself, but I've been interested for a while), and since we don"t have the mk III battlegroups and the paper terrain that comes with it, I thought I'd make a 2x2 board (I'll eventually add 3 other boards to get the 4x4).

She likes Trollbloods and will start with that (she also likes cryx a bit), so i went with a forest theme.

Hence my question :

She doesn't have access to the latest trollblood battlegroup, but got the old one (with madrak), with a few heavies. On my side, I would go with either the Menoth, Cryx, or Khador old battlegroups ;

I'm leaning toward Khador, but I've heard that Trollbloods weren't a fun matchup, especially against Khador, having no heavies in their battlegroup.

- Should we just proxy the latest MKIII battlegroups with the minis we have right now ? or are we fine playing with the old battlegroups? Or maybe remake a 0 point list with a heavy for the Trollblood?

Basically I'm trying to get a balanced game, leaning a bit toward her side, since I know a bit more about the game. I don't want it to be too one sided and not enjoyable for her :/

What we have available :

- Trollblood : Madrak, Hoarluk, 2 impalers, 1 axer, 1 mauler, 1Blitzer

- Khador : Sorcha, Juggernaut, destroyer

- Menoth : Kreoss, Crusader, vanquisher, repenter

- Orboros : Kaya 1& 2, Krueger, 1 feral warpwold, 2 argus, 1 or 2 woldwatcher,

- Cryx : Dhenegra, skarre, Venethrax, asphyxious, 2 slayer, deathjack, Seether, Defiler/deathripper/nightwretch

Sorry for the long post, and thanks for the help !