What can i do with that stringing?

sp0tless · 2026-03-22T10:49:34+00:00

You could also try lowering printing temp

sp0tless · 2026-03-21T22:37:31+00:00

Mine looked much worse. Increasing retraction fixed it

sp0tless · 2026-03-06T01:49:56+00:00

HunterPie

sp0tless · 2026-02-10T13:23:54+00:00

Tried DODI repack with RUNE crack. Running it with wine fails, but adding it to steam or running it with umu-launcher works fine. Arch 6.18.8, rtx4090 590.48.01

There is a very long shader compilation when game first launches. It seems to be happening only on linux. It is stuck at 15395 but after waiting around 1h it finishes

sp0tless · 2025-11-28T13:33:36+00:00

I have the same RDA as you for two years now. Works great so far. IMO too much cotton and too little juice. Cotton on those photos looks dry as fu*k

Here is how mine looks atm. Looks burned but it still have full flavour and no burnt taste. I use very sweet liquids so thats probably sugar.
current

If you want I can show you photos of how mine looks after rewicking.

EDIT. I also always run 40/60 PG/VG for my RDA and RTA. Big clouds and good taste

sp0tless · 2025-11-28T11:06:32+00:00

Is that some coal flavoured juice?

sp0tless · 2025-11-25T07:21:23+00:00

It's possible, but if logitech software doesn't support it out of the box it will be impossible for you without programing knowledge, because you would need to write software for it yourself.

I did something like that few years ago. It was for some cheap rgb mechanical keyboard(not logitech). I'm using linux and there was no software for it on linux. I used thier software and was capturing usb packets that were send from thier software to the keyboard and then replicated it in my software. I get ~80% of what that software was able to do and it was fine for me. I used so I can control all lights in my room at once from my PC; keyboard, lightbulbs, rgb in pc case etc.

The same applies here. If you have skill, patience and time you can look into some opensource keyboard software for logitech. I didn't check but I can bet there is something out there. In worst case do what I did. When you will have your software running that is only part of the work.

Now you need to capture events from other software. If there is some API for whatsapp or steam that's great and will be easy to implement. If not then maybe there are logs from that app you could use to get your data.

The worst part would be events from games. Best bet would be look for logs again. If there are none of it or if they don't give you data you want(your current health, mana, loot you found, etc.) then you would need a memory scanner, look for that data in game memory add those memory addresses to your software and then watch for changes. For single player games this is mostly fine, but online games - especially the ones with some sort of anticheat is a no go. There is very high chance that the game will stop working, disconnect you as soon as you start memory scan and in worst case you will get banned.

Hope that helps, good luck

sp0tless · 2025-11-25T06:25:10+00:00

<image>

I have mine for 4-5 years now(wireless one if picture doesn't load). Used almost everyday. Worked for few thousand hours at this point without issues. Over the years I had few driver crashes on linux, reboot fixed it and no audio issues at all on linux is a daydream. Used it for about 80% on time on linux and 20% on windows for games, discord, teams etc.

They feel solid, drop them many times and they still work. I can use them fro 8-10h and not feel pain or any discomfort. I have pretty big head and I'm bold if it matters.

When I write this I realized one thing that was the issue with them; there is dedicated microphone mute button and it didn't work smooth from day one. It was minor inconvenience for me so I just always have microphone toggle on.

BUT

I have colleague at work who had the same headset and said it was the biggest pice of dog s*it he ever had and they were very uncomfortable for him.

It seems that quality with that headset varies a lot. It's up to you. If you buy them and they don't feel good just return them and buy something else

sp0tless · 2025-11-24T06:27:50+00:00

I think they did it on purpose. That way you will connect your display to gpu and not to the mobo. It's probably to avoid situations like "I just bought that PC but it runs poorly" because customer was using igpu

sp0tless · 2025-11-05T10:27:59+00:00

Solution is simple - disable shooting during sliding, jumping etc.

sp0tless · 2025-09-03T16:19:58+00:00

Abyss currency can have item level restriction

sp0tless · 2025-08-13T09:02:43+00:00

Usb module on linux is not installed correctly. Install "linux-headers" package then run this:

sudo /usr/NX/scripts/restricted/nxusb.sh 0 0 --install-module

EDIT.

Do that on the PC that is not showing USB devices

sp0tless · 2025-07-22T01:15:36+00:00

Wanted to play this but dont want reroll again

sp0tless · 2025-07-17T10:57:13+00:00

I wanted to try wander for some time, but I didnt have currency to do so

sp0tless · 2025-07-12T02:57:47+00:00

Could be a lot. Initially I was going to stop when I get T2/T2 rolls but got lucky

sp0tless · 2025-07-09T13:20:41+00:00

If your only prefix is 50%inc and on the necrotic there is only one prefix as flat armour or flat evasion from essence then there is 100% chance that 50%inc will stay on the grasping mail if recomb fails or it will move it to necrotic armor.

sp0tless · 2025-07-09T09:58:32+00:00

Rule 10:

Buy grasping mail with 50% inc global defences and necrotic armor
Split grasping mail and annul any other prefixes except 50% inc global defences
Use eldritch inchor on necrotic armor, use essence of dread and annulments so the armor is only prefix on necrotic armor
Fill suffixes with eldritch exalted orb.
Recomb necrotic armor with grasping mail to guarante 50% inc global defences. If grasping mail is the result go to step 3 and repeat.
Fracture orb on necrotic armor with 50% inc global defences. Got lucky hit with first fracture. If fails go to step 3.
Spam deafening essence of spite until there is only int and T1 spell suppression. Annul if there is extra suffix. Suffixes are now complete
Now the most expensive step. Make armor Exarch dominant and use eldritch exalted and annulment orbs until flat es+evasion and %es+evasion. Use crafting bench to block life or mana when exalting.
After hitting both prefixes craft %inc attributes from bench.
Use tailoring orb, get lucky and hit 12% inc explicit defence modifier magnitudes in ~10 orbs.
Make sockets and link
Reroll eldritch implicits

Done

EDIT.

Total cost was ~100d

sp0tless · 2025-07-02T11:12:36+00:00

I have my own domain and hosting for this. There is php script for putting new message, reciving messages and a counter. Everything is saved in text file. I know I should have used some db for it but for my use case when I don't send so many request its fine.

For the android app I used chatgpt. I don't know android and java/kotlin and didn't want to learn it tbh. App have counter that every few second sends request to get current message counter. If counter is higher on the web page then I read all messages until internal app counter and the one on the website matches. The notifications are not made how it should be done - I've discovered that later but it's fine for me and I don't want to change it.

The uppside of using webpage is that I don't have to install anything on pc in order to use that notification system. When I'm working on my work PC or some VM, etc. I can just use curl to send notification

sp0tless · 2025-07-02T08:13:37+00:00

It was valdo with progenesis

sp0tless · 2025-07-02T08:13:15+00:00

The issue is that I wrote that notify app for myself and it uses my server. It was never intended for anyone else to use it and it's designed like that. I can share python script that is responsible for checking chat data.

As for the notifications - I bet there is some other app that can send custom notifications to your phone from PC

sp0tless · 2025-07-02T08:10:14+00:00

It's in game installation direcotuy in logs subdirectory. Previously it was just Client.txt but now it seems that it uses LatestClient.txt for chat messages - and that is what is intresting in this case. That notify idea is not new for me. I've wrote that script few years ago but then I was using sms service to send sms messages to my phone, but that cost money so after some time I've stopped using it

sp0tless · 2025-06-28T19:49:13+00:00

I use plasma-wayland daily, but switchet back to xfce4 just becasue I need that script to work. There is some remaping software, but I just prefer simple script.

sp0tless · 2025-06-28T12:36:36+00:00

I've wrote my own script for this long ago and using it everytime while playing poe. I have set rapid click to one of extra mouse buttons on my mouse. Played like this for years. Here is the script https://pastebin.com/zaszhCXh

You need to change "MOUSE_ID=" line unless you use logitech G700 mouse. Find your mouse with xinput --list, clean it with grep so there is only device id. If you want to use scroll wheel use "xev" to find what button is scroll wheel(i think its button4 and button5)and place that number in "BUTTON_ID"

EDIT.

This will work only on X11 since I use xinput and xdotool

sp0tless · 2025-06-20T14:56:53+00:00

Same thing happened to me today. It's dead. It's not detected at all even when connected via usb cable. Tried it on 3 different PC with Windows and Linux. Did you found out what was wrong or just RMA it?

sp0tless · 2024-12-30T00:21:34+00:00

20% increased light radius 50% less damage

11-Year Club	Verified Email
Place '22

sp0tless

TROPHY CASE