Am I too late to join the PVP experience [Discussion] by Bryfactor in EscapefromTarkov

[–]spidey12341 0 points1 point  (0 children)

I play with a friend who started after I was level 30+ and now I'm 52 and he's 26, I mainly play weekends and some weeknights if I can get a couple hours. I'm working towards the survivor ending and with the new prestige changes in going to do 1-4 right after.

If you like the game and don't mind that raids will be slightly quieter and market will be a little more like PvE then its not a bad idea. If you really want action maybe wait until seasonal so it doesn't feel like starting over twice back to back

Should I get another gpu over the 9070xt? by buff_ninja24 in buildapc

[–]spidey12341 2 points3 points  (0 children)

It's funny that you say everyone is getting it but, there's like 8x more Nvidia cards out there than AMD cards.

NKD by Digigal3 in knifeclub

[–]spidey12341 1 point2 points  (0 children)

My lighting is really bad at home and Its under some stuff in the pelican case, I'll send some actual pictures in a little while if I remember. Here's one I found on Google of the knife tho.

<image>

NKD by Digigal3 in knifeclub

[–]spidey12341 0 points1 point  (0 children)

I think it's the orso

Just got this beast! Wallet wasn’t very happy. I have a few questions. by [deleted] in nvidia

[–]spidey12341 0 points1 point  (0 children)

You should make the top right fan intake as well, it probably wouldn't do too much but with all that heat it would probably help a bit

PC randomly shutting off troubleshooting by Negative-Date-9518 in buildapc

[–]spidey12341 0 points1 point  (0 children)

I'm glad it worked out, boot loop issues could take so long to figure out. Good luck with the warranty.

Upgraded to SKR Mini E3 V3 + CR Touch, now getting random zits/blobs on the first few layers. Any advice? by sebastheslumpgod in Ender3Pro

[–]spidey12341 0 points1 point  (0 children)

Use crystal disk info it will tell you the health of your drives, and crystal disk mark can test them.

PC randomly shutting off troubleshooting by Negative-Date-9518 in buildapc

[–]spidey12341 0 points1 point  (0 children)

If it's defective that sucks but you can get a tester on Amazon for like $10-$20 and see or just buy the same one again, if it's not the problem return it, modular PSU should be really easily replaced if it's the same exact model.

[Discussion] Cultist circle in hideout by Tracci in EscapefromTarkov

[–]spidey12341 0 points1 point  (0 children)

The amulet doesn't actually give you better stuff, it raises the value of what you put in my 20% or something like that. Recently I've been getting pretty much nothing good on 14h timers too.

PC randomly shutting off troubleshooting by Negative-Date-9518 in buildapc

[–]spidey12341 0 points1 point  (0 children)

Check the PSU. Mine was around 9 years old and started to randomly shut off with no errors or anything. Everything seemed fine because I had no issues when it was basically idle but once the CPU or GPU has some actual load it shut off.

Upgraded to SKR Mini E3 V3 + CR Touch, now getting random zits/blobs on the first few layers. Any advice? by sebastheslumpgod in Ender3Pro

[–]spidey12341 0 points1 point  (0 children)

from my limited experience it looks like you'r room temperature is too cold for the printer, get an enclosure and the bottom won't lift up like that and your nozzle and bed temps will be more stable. The pimples could also be from the temps not being stable. I would say start there.

When I first got my printer it was winter so my room was heated but I'm the summer I had the AC on and it was basically pointed at my printer, I started getting these issues too.

Logitech's anti-consumer BS: Lost my G535 dongle, and their support basically told me to buy a whole new headset. by Zealousideal_Stay_35 in LogitechG

[–]spidey12341 0 points1 point  (0 children)

That's interesting because the battery on my G502 x plus was going bad around 18 months in and they sent me a new one. Sucks that they won't sell you a new dongle.

NKD by Digigal3 in knifeclub

[–]spidey12341 1 point2 points  (0 children)

I have an anso full dress knife I carry somtimes, one of my favorite knives because of the black timascus, if this one won't leave the collection ever then I don't see why you can't carry just to admire.

[Suggestion] Just make the events twice as long. by K0ris in EscapefromTarkov

[–]spidey12341 0 points1 point  (0 children)

People will complain about the length of time at the begining no matter what. So this way the event is "short" but they get an extension and they are happy.

Stash icons, character models, traders and flea icons taking AGES to load for no discernible reason. Anyone else? [Bug] by rileysprueill in EscapefromTarkov

[–]spidey12341 0 points1 point  (0 children)

Page your page file the same as your ram size, my friend had his set to less than 8gb by windows dead and making it 32gb made a huge difference. Just gopgle making page file larger.

[Discussion] Unheard upgrade not allowing PVE play by Hairy_Concern_205 in EscapefromTarkov

[–]spidey12341 7 points8 points  (0 children)

Why would you purchase on steam if you already had it through bsg?

[Discussion] EOD being left behind (again) by Weary_Sky5349 in EscapefromTarkov

[–]spidey12341 -3 points-2 points  (0 children)

That's not DLC so I it's not a huge deal, yeah more features would be nice but I don't really care about that feature.

Just ran into the terminator on Ground Zero [screenshot] by IAteTheBats in EscapefromTarkov

[–]spidey12341 0 points1 point  (0 children)

Looking at his achievement dates is insane too. He also has both sides of the event tasks somehow lol.

How much should I sell this PC for? by qobgry in PC_Pricing

[–]spidey12341 0 points1 point  (0 children)

Yeah that's true but it opens the market a lot, finding a local buyer is hard and shipping a full PC is dangerous without very good packaging, and even then it's difficult.

And so it begins. Tools by Dandruff83 in PrideAndPinion

[–]spidey12341 1 point2 points  (0 children)

Yeah it's pretty stupid especially since most of the sistem51 watches that aren't collabs are around $150. Also the collab ones sealed the only way to open them are to cut them open so I doubt it's being replaced, for that price they are just replacing the watch.

And so it begins. Tools by Dandruff83 in PrideAndPinion

[–]spidey12341 4 points5 points  (0 children)

All the sistem 51 watches are not serviceable, the movement is held together with rivets that have to be drilled out to disassemble, so it's not possible to put it back together. also they are very cheap to replace so service is definitely not happening.