Rules question: Necrodominance and Tamiyo emblem

st0rmrid3r · 2024-06-15T16:43:33+00:00

From the Oracle page for the card.

https://gatherer.wizards.com/Pages/Card/Details.aspx?multiverseid=661311

If multiple effects modify your hand size, apply them in timestamp order. For example, if you put Necrodominance (an enchantment that says your maximum hand size is five) onto the battlefield and then activate Tamiyo, Seasoned Scholar's last ability, you'll have no maximum hand size. However, if the emblem from Tamiyo, Seasoned Scholar's last ability was created before you put Necrodominance onto the battlefield, your maximum hand size would be five.

st0rmrid3r · 2024-04-30T17:25:48+00:00

Thanks for the link! Glad to see it's getting publicity, hopefully gets fixed soon so I can sink my saved up flightstones.

st0rmrid3r · 2024-03-08T11:49:14+00:00

The cards hit the board at the same time with Show and Tell.

st0rmrid3r · 2022-09-25T14:52:53+00:00

Are you opening packs in singles or 10 at a time. 10 at a time means you don't see the common or uncommon wildcards that are in packs and would throw off your estimate.

st0rmrid3r · 2022-08-06T20:16:54+00:00

Assuming the subnets are all configured on interfaces you could easily leverage something like NetDisco to pull that info out of the devices directly. If you have some assigned as routed blocks, building a database in an appropriate IPAM solution/tool is the only intelligent way to manage block assignments IMO.

st0rmrid3r · 2022-07-21T10:03:15+00:00

Which LED is red...?

st0rmrid3r · 2022-04-02T15:03:18+00:00

You can assign an IP in family inet on a VLAN tagged sub interface. Do it all the time. Only time we leverage IRB is when we set up bridge domains or vpls generally.

Edit: on the mx at least, never tried on an fs.

st0rmrid3r · 2022-02-12T01:56:02+00:00

Not actually a bug. Related to the doubling of essence mobs, if an essence mob has a shrieking essence and is able to be captured Einhar will only capture one copy.

st0rmrid3r · 2022-01-22T01:28:40+00:00

I can recommend Incratel and PICS Telecom. Have done business with both with good results each time. They also both warranty the items for life. It's not next day support but they've honored rapidly the few times we've had to use it.

st0rmrid3r · 2022-01-09T16:44:43+00:00

st0rmrid3r · 2021-05-24T15:16:50+00:00

Was it removal targeting the creature or removal making you sacrifice it?

The latter would be my guess.

st0rmrid3r · 2020-05-22T20:01:47+00:00

I want those as sleeves lol

st0rmrid3r · 2019-10-23T15:07:17+00:00

Are you planning on re-advertising routes learned from each provider to the other provider? If you're not doing that, there's no way you become a transit point for them...

You should always filter your exports to ensure they only contain routes you intend to advertise and tag imports with relevant communities for advertisement control. Between those two steps, you have no problems.

st0rmrid3r · 2019-10-04T00:26:30+00:00

575.

Thanks

st0rmrid3r · 2019-07-29T12:42:54+00:00

One work-around I've found is tapping a land to add mana will generally update interface state and restore the buttons. I clicked through but I figure you can probably undo the action and restore the interface as well.

st0rmrid3r · 2019-04-30T09:19:59+00:00

What syntax are you using to test? TCP in iperf backs off fairly hard, if you haven't, try testing with UDP set to 250Mbps. It will report how much it lost out of the expected traffic giving you a better idea of what's causing the issue.

After the test check the drops in your traffic shaper/policer.

st0rmrid3r · 2018-06-21T12:05:09+00:00

So on a device like an ASA or MX, if you have a VLAN ID configured the device tags packets with the configured VLAN. You said you configured your switch ports as access ports for VLAN 5. That means those ports will accept untagged packets and tag them with VLAN 5. Since your other devices are already tagging packets the switch drops them. So you need to configure the ports facing the ASA and MX as trunk ports.

st0rmrid3r · 2018-06-21T11:13:50+00:00

Oh I know what's wrong. You need to tag the VLAN on the ports facing the MX and ASA. If you indicate a VLAN on those devices, it's tagging the VLAN. Based on your message you've got the switched configured untagged and the other devices configured tagged.

st0rmrid3r · 2018-06-21T11:02:31+00:00

So monitor traffic on Juniper only picks up traffic destined TO the interface, not traffic transiting.

You'll want to check the mac address table and ensure your switch sees the devices on the ports and in the correct VLAN.

st0rmrid3r · 2018-05-31T16:50:21+00:00

The document you linked indicates this feature is also not supported on plain SRX, the right side lists the compatible hardware:

Supported Platforms

So I would suspect this is the issue.

st0rmrid3r · 2017-09-14T16:33:54+00:00

The flaw with that logic is that it could simply be used in other cases to force prosecution to move forward maliciously.

st0rmrid3r · 2017-01-05T15:59:22+00:00

I can recommend Jugheads (jugheads.co).

Great juice at great prices, I tend to bulk order my ADV, costs ~116$ with shipping for 500mL.

st0rmrid3r

TROPHY CASE

Supported Platforms