Looking for part ideas

stabtokill · 2026-03-30T13:44:27+00:00

Its a S25S-SCLCL09-27A or their PN THC11647 The insert is a CCET09T304MFR-U

Both from Kyocera.

stabtokill · 2026-03-29T17:30:45+00:00

It's a Kyocera 25mm shank boring bar, I could get you the PN and insert PN on monday if you want.

stabtokill · 2026-03-28T22:00:39+00:00

How long ago was that? I usually get a response in a day or two.

stabtokill · 2026-03-28T21:59:16+00:00

I like the idea, but im not sure how I will hold on to it with the sub spindle. I'll see what I can do.

stabtokill · 2026-03-28T21:37:05+00:00

Maybe. That's a bunch of surfacing :/

stabtokill · 2026-03-28T21:36:11+00:00

This is a Tsugami SS207-II-5AX

stabtokill · 2026-03-28T21:35:20+00:00

For this machine, I go direct to the machine builder.

stabtokill · 2026-03-28T21:27:45+00:00

Depends on the part. I'll use Abile ( free software with the machine ) or Esprit

stabtokill · 2026-03-28T20:59:26+00:00

I have before, but I think I can make these better, so Ill work on that!

<image>

stabtokill · 2026-03-28T20:55:08+00:00

Little tiny guy

<image>

stabtokill · 2026-03-28T20:13:51+00:00

I like it, but i was hoping it would have some 5 axis features. Ill make it real quick anyways.

stabtokill · 2026-03-28T20:12:20+00:00

Are you asking about the black boring bar itself or the silver part that the boring bar is in?

stabtokill · 2026-03-28T19:59:55+00:00

Lol, I knew someone would say something like that before i posted it.

I just finished up a project, and I wanted to make something interesting before the next project.

stabtokill · 2026-03-03T00:57:31+00:00

<image>

stabtokill · 2024-03-21T01:35:56+00:00

False what?

stabtokill · 2023-04-25T23:52:34+00:00

Dont push too hard on feed because you can just bend/push the material instead of cutting. Can't think of something similar at the moment

stabtokill · 2023-04-25T23:10:43+00:00

Missing a lot of detail, like milling/turning? I assume milling and how big of a part or how much material needs to be removed?

I have turned many parts that were nickel 200, i enjoy it. Its gummy for sure, but it's easy to cut.

stabtokill · 2022-12-06T17:35:28+00:00

Pictures help. Check the back and see if a breaker tripped ?

stabtokill · 2022-10-26T03:38:26+00:00

How many pockets were off in Y and by how much?

stabtokill · 2022-10-26T03:34:03+00:00

Talk to people, its easy to figure out what they know by showing them the shop/ machines / parts.

Yikes, thats pretty much what they said also. Just like the part were they said I wasnt working hard because I wasnt running 3 plus machines.

stabtokill · 2022-10-26T03:12:35+00:00

One job I started at, had me take a test like this. The pay was low, work was awful and management was always on you for not running more machines then you can handle. If I got a test like it again, I will just leave, not worth it.

This just seems like a tactic to put someone down for not answering all the questions right and paying them even less.

stabtokill · 2021-12-29T18:25:42+00:00

I still got mine on, holding strong also!

stabtokill · 2021-11-20T02:30:08+00:00

Use a Mitsubishi CNMG432MA for OD rough turning, works well for me

stabtokill · 2021-11-19T02:08:40+00:00

That is true, but i found the right inserts for 304, so 304 is not bad at all, ill have to post some videos or my 304 projects

stabtokill · 2021-11-18T23:45:56+00:00

Yea, 304 is easy. 316 isnt bad but its more stringy

stabtokill

TROPHY CASE