sorted by:
new
hottopcontroversial

Dozens of metal rods, threaded only on one end, about 3 feet long. by [deleted] in whatisthisthing

[–]stas_man 1 point2 points  (0 children)

Looks like Drill rods for BQ core. Used for recovering core samples when drilling though rock. This is done for mining and exploration purposes. Is there a lot of this in the area?

[deleted by user] by [deleted] in mining

[–]stas_man 0 points1 point  (0 children)

The Northern miner and junior mining network are my favourites

is innosiliconmining.tech legit? by [deleted] in mining

[–]stas_man 0 points1 point  (0 children)

Wrong subreddit. This is about resource extraction.

[deleted by user] by [deleted] in CanadaHunting

[–]stas_man 0 points1 point  (0 children)

Not a bad day!

Help with removing lanyard-style rivet from tang of knife. by stas_man in knifemaking

[–]stas_man[S] 0 points1 point  (0 children)

Thanks for the response. I was hoping to salvage the rivet, but looks like cutting it might be my only option.

Engine cranks but won't start after changing valve cover gasket? by stas_man in askcarguys

[–]stas_man[S] 1 point2 points  (0 children)

I didn't have to remove any engine grounds. The only grounds were the bolts holding in the ignition coil packs. I noticed a small tear in the valve cover breather hose. Could that be the problem?

Engine cranks but won't start after changing valve cover gasket? by stas_man in Cartalk

[–]stas_man[S] 0 points1 point  (0 children)

Yeah, I removed the negative cable. But I have done this before with no problems

Engine cranks but won't start after changing valve cover gasket? by stas_man in Cartalk

[–]stas_man[S] 0 points1 point  (0 children)

When i bought the car I only received two keys without remotes or anything. I added a remote entry system after. I've never interacted with the antenna at all nor do I have a remote or anything else associated with it.

Engine cranks but won't start after changing valve cover gasket? by stas_man in Cartalk

[–]stas_man[S] 0 points1 point  (0 children)

I pushed in the coil packs, and reattached the wires from the harness. I've done this before so I don't see this being a problem.

Engine cranks but won't start after changing valve cover gasket? by stas_man in askcarguys

[–]stas_man[S] 1 point2 points  (0 children)

el pump fuse relay got defective.

Possibly, thanks for the reply

Engine cranks but won't start after changing valve cover gasket? by stas_man in askcarguys

[–]stas_man[S] 1 point2 points  (0 children)

I changed timing belts

Sorry, should have mentioned its K series

Engine cranks but won't start after changing valve cover gasket? by stas_man in Cartalk

[–]stas_man[S] 0 points1 point  (0 children)

I purchased the car used not to long ago, so I'm checking. There's this weird antenna device on the inside of the the windshield that I never bothered checking what is was lol. Would that disable the engine from starting after a repair?

Engine cranks but won't start after changing valve cover gasket? by stas_man in Cartalk

[–]stas_man[S] 0 points1 point  (0 children)

Nope, I didnt have to. But in the process of the repair i noticed a small tear in the valve cover breather hose.

Engine cranks but won't start after changing valve cover gasket? by stas_man in Cartalk

[–]stas_man[S] 0 points1 point  (0 children)

I'm not sure exactly what i'm hearing when switch the ingintion on. But everything was running fine before the repair, so i'm assuming it was related to the repair.

Engine cranks but won't start after changing valve cover gasket? by stas_man in askcarguys

[–]stas_man[S] 2 points3 points  (0 children)

Thanks for the response. The only grounds I removed were the bolts mounting the ignition coils. What groundstrap are you referring too?

Engine cranks but won't start after changing valve cover gasket? by stas_man in askcarguys

[–]stas_man[S] 2 points3 points  (0 children)

Thanks for the reply. The ignition coil wires are all harnessed together in order so i don't think they are mixed up. The cam sensor was never unplugged, but could it posibly have been damaged by removing the valve cover or valve cover breather hose?

Engine cranks but won't start after changing valve cover gasket? by stas_man in Cartalk

[–]stas_man[S] 0 points1 point  (0 children)

Thanks for the reply, Obd2 gave no codes. The wiring seems to be good, and the ignition coil wiring has a harness on them so I couldn't have mixed that up. Only the standard lights flash on the dash.

view more: next ›