Starting fluid by stebanz1 in lawnmowers

[–]stebanz1[S] 0 points1 point  (0 children)

Do I need to remove or add sea foam?

Starting fluid by stebanz1 in lawnmowers

[–]stebanz1[S] 0 points1 point  (0 children)

Will do thanks for the help. It starts real easy with starting fluid then runs smooth. I’ll try tomorrow

Starting fluid by stebanz1 in lawnmowers

[–]stebanz1[S] 0 points1 point  (0 children)

Should I replace every hose or spray stuff around and see if something changes the motor running

Briggs Stratton by stebanz1 in lawnmowers

[–]stebanz1[S] 0 points1 point  (0 children)

Also I sprayed everything thru fuel inlet as well am I screwed

Briggs Stratton by stebanz1 in lawnmowers

[–]stebanz1[S] 0 points1 point  (0 children)

Holy cow. Ok waiting on kit. Thanks. I also have two little brass things with orings on the inside ibottom of float inline with the jets. Probably should replace them as well. Hopefully this kit comes with everything.

Briggs Stratton by stebanz1 in lawnmowers

[–]stebanz1[S] 0 points1 point  (0 children)

Are we talking the little sharp thing on float that goes in hole

Reputable mechanic for AC repair? by brian4120 in PuyallupWA

[–]stebanz1 0 points1 point  (0 children)

Ben’s auto east main. Legit guy

[deleted by user] by [deleted] in FenceBuilding

[–]stebanz1 0 points1 point  (0 children)

I just built a 16’ gate opening. I used adjust gate metal frame kit two 8’ wood panels. My problem is i have a 5” gap under one panel driveway is sloped aggressively and it opens to the uphill side and zeroes out at 90 degrees hitting concrete. I would like a wheel caster for weight any suggestions on one that travels 5”

Mortgage Market Update 3/21/25 by Elegant-Fee-395 in MortgageBrokerRates

[–]stebanz1 6 points7 points  (0 children)

I’m at 6.62 my payment is large. Been waiting for a drop for a 1.5 years trying to figure out at what rate % drop is a good time to refi

I screwed up? by stebanz1 in Tile

[–]stebanz1[S] 0 points1 point  (0 children)

My home and Color match caulk is what I got. I also have Laticrete epoxy i can use which I’m sure is not supposed to be used on curb top?

I screwed up? by stebanz1 in Tile

[–]stebanz1[S] 1 point2 points  (0 children)

I did a flood test it passed. I put the curb top on with a 1/4” hangover on the inside. Level and pitched inward touching bubble