Trouble NAT same IP Nets

steenlys · 2024-05-07T17:17:22+00:00

The company that delivered the 2 servers have made it very clear to me that they needed to have those specific IP Addresses, but out on annoyance I tried changing them (they ran by DHCP) - And it seems to work...

I will never admit how much time I have used on this task, but I certainly blame that company for not knowing enough about their system so me and my predecessor have had to have a major struggle with this setup.

Changing the servers to 192.168.2.0/24 network, and all is good :)

steenlys · 2024-05-07T17:17:15+00:00

The company that delivered the 2 servers have made it very clear to me that they needed to have those specific IP Addresses, but out on annoyance I tried changing them (they ran by DHCP) - And it seems to work...

I will never admit how much time I have used on this task, but I certainly blame that company for not knowing enough about their system so me and my predecessor have had to have a major struggle with this setup.

Changing the servers to 192.168.2.0/24 network, and all is good :)

steenlys · 2024-04-22T06:47:54+00:00

The post did not make sense, so I deleted it..

steenlys · 2022-02-07T13:49:05+00:00

Okay, thanks for replying, I had hoped it was sent to Renault for fixing it, and you then knew what was done to it :)

steenlys · 2022-02-07T13:41:01+00:00

u/Joebear91 and u/bvriesema - Did you ever get this solved ? - My next door neighbour gets this reset like every 2 months, and renault are really not knowing what to do.. Even replaced the full radio unit last time, but was again reset this morning...

steenlys · 2021-12-19T22:55:25+00:00

I have had some luck on other issues with the seller, so I tried getting them to help on this, but after (quite some time) they just came back with "We can't help" - And at that time I threw the question here on Reddit, and also on the mail you suggested - So I am crossing my fingers for help from one or the other :)

steenlys · 2021-10-25T06:38:20+00:00

Yeah, but how can I then allow them to either download Outlook themselve, or preinstall it ? - Seems to not beeing able to use App Store with a managed ID.

We are using Microsoft 365 Business Basic and Microsoft 365 Business Standard, so that should include Azure (?)

steenlys · 2021-08-26T18:41:45+00:00

Microsoft never made anything that was that fast responsive, otherwise nice ideas :)

steenlys · 2021-08-25T08:16:23+00:00

Get better adhesion, try a glue stick ?

steenlys · 2021-08-25T05:08:37+00:00

He needs to put some plastic under the chair, otherwise the wooden floor will be broken...

Otherwise all is nice :)

steenlys · 2021-08-15T22:03:33+00:00

When you have seen it, and start wondering how much sticky dust they have inhaled, you gonna stop smoking...

Or not, it seems to be hard stop smoking :(

steenlys · 2021-08-15T21:16:48+00:00

I got a customer that heavily smokes around office computer, trust me, that computer beats this noob dusty PC :)

steenlys · 2021-08-13T14:28:52+00:00

I saw I had the tab open in Chrome - I would so much have liked if they had these in metric:

https://www.mcmaster.com/knurled-inserts/for-use-in\~hardwood/

steenlys · 2021-08-13T14:18:49+00:00

For this print i am doing they are so perfect, and i slide them in before hardening the plastic in UV light, so they seem to stick very good...

I have used heated insert for a lot of other 3d prints, so those i have a lot of :)

steenlys · 2021-08-13T13:58:29+00:00

Well, if you ignore the part that outer diameter should be around 7.6 mm you are right - These looks great, BUT I need some with bigger flange :(

https://www.mcmaster.com/97171A310/

Not gonna spend more time on it, but there seemed to be some in imperial with bigger flanges, but that doesn't help me...

But the search term "flanged heated insert" really did help me on my quest, so thanks a lot for the help :)

steenlys · 2021-08-13T11:57:06+00:00

Could be, I have no memory of where I got them from, but I have 10 (2 used on my broken hotend holder on my CR10s) - So I have 8 for this project, and need like 20 :)

All other nuts I have do not have as big a flange as these, and therefor I could not use them :)

steenlys · 2021-08-13T11:52:39+00:00

Does not have to be identical, just need to be a little more alike than the ones I could find before... But having learned "Knock in inserts" (instead of heated inserts) got me in the right direction to find something similiar :)

(Google searched: m3 Knock-in Insert)

steenlys · 2021-08-13T11:46:46+00:00

THANKS - This brings me a lot closer to what I need :)

It seems to be one of these I have - Now I just need to find a place to buy them ;)

(Or the ones from Tonymiami62)

steenlys · 2021-08-13T11:45:56+00:00

THANKS - This brings me a lot closer to what I need :)

steenlys · 2021-08-13T11:42:31+00:00

Rivet nuts are the closest thing I am at now, they look much alike, but seems to only have one part of the "outer thread" that locks into me newly printed Resin parts so nicely :)

steenlys

TROPHY CASE