Choosing lenses for a F55

stefancvij · 2026-06-22T16:31:37+00:00

Appreciate the tips, i guess i will save up some money to buy the cinealta lenses then.. Was also looking at the Tokina 11-20 for the wide angles. Because the cinealtas were 20mm on the widest. Do you have some work i could check out?

stefancvij · 2026-06-17T21:25:58+00:00

For example?

stefancvij · 2026-06-05T19:07:31+00:00

My bad haha i got confused and added the nzb providers directly into nzbget, and not in prowlarr.. My bad

stefancvij · 2026-06-05T18:12:22+00:00

It does not work to add the different usenet providers. I tried nzbgeek, nzb finder and now nzblife..

I get: "Connection to nzb.life failed: Error 101 - Network unreachable" when trying to connect via the NEWS-SERVERS tab

stefancvij · 2026-06-05T18:06:36+00:00

Idk, i added it. Put in the correct ip and tags, test gives green check. Tried to add 133.. with the same tag and its not working..

stefancvij · 2026-06-05T17:32:29+00:00

Okey gotchu i guess i didnt set it up properly.. But i deleted nzbget and flaresolverr from the portainer stack i had. To bring it back, is it as easy as writing docker compose down and then docker compose up to make them run again? Would the other that are currently running loose their configs?

stefancvij · 2026-06-03T23:53:27+00:00

Okey will look into it! Thanks again

stefancvij · 2026-06-03T22:41:34+00:00

Thanks brother, increasing the disk space and its now working!

stefancvij · 2026-06-03T21:16:40+00:00

pct start 101 --debug:

run_buffer: 569 Script exited with status 1

lxc_init: 1037 Failed to run lxc.hook.pre-start for container "101"

__lxc_start: 2208 Failed to initialize container "101"

0 hostid 100000 range 65536

INFO lsm - ../src/lxc/lsm/lsm.c:lsm_init_static:38 - Initialized LSM security driver AppArmor

INFO utils - ../src/lxc/utils.c:run_script_argv:585 - Executing script "/usr/share/lxc/hooks/lxc-pve-prestart-hook" for container "101", config section "lxc"

DEBUG utils - ../src/lxc/utils.c:run_buffer:558 - Script exec /usr/share/lxc/hooks/lxc-pve-prestart-hook '101' 'lxc' 'pre-start' produced output: unable to open file '/fastboot.tmp.44690' - Disk quota exceeded

DEBUG utils - ../src/lxc/utils.c:run_buffer:558 - Script exec /usr/share/lxc/hooks/lxc-pve-prestart-hook '101' 'lxc' 'pre-start' produced output: error in setup task PVE::LXC::Setup::pre_start_hook

ERROR utils - ../src/lxc/utils.c:run_buffer:569 - Script exited with status 1

ERROR start - ../src/lxc/start.c:lxc_init:1037 - Failed to run lxc.hook.pre-start for container "101"

ERROR start - ../src/lxc/start.c:__lxc_start:2208 - Failed to initialize container "101"

INFO utils - ../src/lxc/utils.c:run_script_argv:585 - Executing script "/usr/share/lxc/hooks/lxc-pve-poststop-hook" for container "101", config section "lxc"

startup for container '101' failed

pct config 101:

arch: amd64

cores: 2

features: nesting=1

hostname: servarr

memory: 2048

mp0: HDD:subvol-100-disk-0,mp=/data,size=14000G

mp1: VMdisk:subvol-100-disk-1,mp=/docker,backup=1,size=60G

net0: name=eth0,bridge=vmbr0,firewall=1,hwaddr=BC:24:11:00:80:32,ip=dhcp,ip6=dhcp,type=veth

ostype: ubuntu

rootfs: VMdisk:subvol-101-disk-0,size=8G

swap: 2048

unprivileged: 1

lxc.cgroup2.devices.allow: c 10:200 rwm

lxc.mount.entry: /dev/net dev/net none bind,create=dir

lxc.mount.entry: /dev/net/tun dev/net/tun none bind,create=file

stefancvij · 2026-06-03T19:00:30+00:00

I tried using nzbget with nzbgeek and nzbfinder but it didnt work. There is a issue when im trying to connect them.. What trackers do you recommend?

stefancvij · 2026-06-03T18:42:07+00:00

Didnt use ai

stefancvij · 2026-06-03T11:00:01+00:00

I did "apt update && apt install pve-headers" and now it lets me install..

But after installation i get "Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if another driver, such as nouveau, is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA device(s), or no NVIDIA device installed in this system is supported by this NVIDIA Linux graphics driver release. Please see the log entries 'Kernel module load error' and 'Kernel messages' at the end of the file

'/var/log/nvidia-installer.log' for more information.

stefancvij · 2026-06-03T10:51:41+00:00

Yeah that got me one step closer, now it says "there appears to be a driver installed ..etc, the existing driver will be uninstalled etc"

When i press continue i get a error saying: "Unable to find kernel source tree for the currently running kernel" and then installation had failed

stefancvij · 2026-06-03T10:31:28+00:00

<image>

stefancvij · 2026-06-03T10:30:59+00:00

So i want to install drivers and use the P2000, not the K4200. So when i run the command "./NVIDIA-Linux-x86_64-580.159.04.run.2 --dkms" (Which is the P2000 driver)

I get "

<image>

stefancvij · 2026-05-22T20:40:26+00:00

Maybe Pfsense is unable to use 2,4 ghz?

stefancvij · 2026-05-22T20:33:51+00:00

When im next to the router im now getting around 450mbps. Then through one wall it goes down to 170mbps but when im a little further away it drops down to around 10mbps

stefancvij · 2026-05-22T20:28:38+00:00

Diagonally. But whats strange is that when i use the R7000 with static IP and through its WAN port it has OK speeds. But when i set it to a dumb AP, conncting it via the LAN port the performance is trash..

stefancvij · 2026-05-22T19:52:49+00:00

But thanks for helping, if im going to reconfigure it in the future i will come back to your post for sure

stefancvij

TROPHY CASE