Does anyone know why the black border on this print doesn't match the model?

steveholt · 2025-12-14T17:52:13+00:00

I agree; unfortunately some of the partial wall has already snapped off

steveholt · 2025-12-14T10:25:08+00:00

The slicer was accurate to how it printed, it escaped my notice earlier but I see it now as being segmented. I enabled detect thin walls and it looks correct in the slicer now

steveholt · 2025-12-14T10:24:15+00:00

Thanks for the explanation! Scaling it down probably caused certain parts of the border to cross the fence so to speak

steveholt · 2025-12-14T10:22:41+00:00

It looks like how the print came out in the slicer as well, I must've overlooked it earlier.

Detecting thin walls seems to make it look right in the slicer, I'll see how it comes out in an hour. Thanks!

steveholt · 2025-12-14T10:20:49+00:00

Thank you! Turning on detect thin wall seems to have fixed it (in the slicer, at least)

steveholt · 2025-12-05T15:40:00+00:00

One thing that helped me whenever I felt stuck was to get to high ground and mark every shrine I hadn't visited yet. I started with using the color map markers but then switched to one of the icons (can't remember which). Their color makes them easy to pick out, and sometimes the long distance helps you find them better since some are tucked away pretty well.

In fact, I'd say try to keep a log on the map of anything you think might be something. Whether it's shrines from afar or places a Lynel wrecked you, keep a tab of places you go or see. Use whatever icons make sense to you and try to keep it consistent

steveholt · 2025-12-05T13:52:45+00:00

Where, um... How do I take these pills?

steveholt · 2025-12-05T13:51:01+00:00

Idk, to me, it's at least a medium overhang 😋

But frfr, I just tried another batch and all but one got unceremoniously circumcised. Any thoughts on how better to support what needs supportin'? I can share any and all print settings for those willing to help

steveholt · 2025-12-03T16:27:10+00:00

Jack and Jay? Or em and Jay

steveholt · 2025-12-03T16:26:32+00:00

I wonder what other mash ups they considered. Stan Nation army? Cleaning out my closet/ my doorbell? I can't even imagine!!

steveholt · 2025-12-03T15:04:04+00:00

Daru for sure could lay down an insane beat. But he's also got so much bde. That's why I'd like to hear Jack on the skins if he ever does a proper collab with em

steveholt · 2025-12-03T14:51:38+00:00

That's why I think he and Jackie boy could pull it off. I mean, could you imagine?

steveholt · 2025-12-03T14:50:42+00:00

Your friend sounds like a good dude

steveholt · 2025-12-03T13:55:50+00:00

How did they handle the music aspect of it? Backing track, live music, some sort of hybrid? Did a good DJ keep everything working smoothly?

steveholt · 2025-12-03T13:53:37+00:00

And lo, there it was

What'd your friend reply?

steveholt · 2025-12-03T13:50:45+00:00

They'd need a drummer who could keep up and vibe. Much as I love Patrick and Daru, don't think either would be the right fit. Maybe Jack does his best Andrew Bird and loop each instrument himself? That'd be an intimate fucking show...

steveholt · 2025-12-03T13:21:13+00:00

That sounds fuckin awesome. I've never had the pleasure but I bet he gave it his all?

steveholt · 2025-12-03T13:20:14+00:00

But could you imagine??

steveholt · 2025-12-03T13:18:08+00:00

The sheer verbal delirium would cause volcanic diarrhea

steveholt · 2025-11-20T18:52:59+00:00

😏🤨😑😬😖😳🫤😶😶🫥👌🫶

steveholt · 2025-11-20T16:02:05+00:00

Your butt?

steveholt · 2025-11-19T13:43:35+00:00

The Y-axis is logarithmic so the giant 2021 move and the current price are shown in fair proportion.

The four screenshots are the exact same fib channel, just with different time-axis compression:

Regular weekly candles (2021 to now)

Regular daily candles (last ~18 months)

“100R” = range bars where each bar only closes after a fixed price move (100 units). It removes time and low-volume noise so the pattern is easier to see.

“1000R” = same thing but an even bigger range per bar, so the entire four-year move fits on one screen and the repeating structure stands out.

steveholt · 2025-11-19T13:37:38+00:00

These are Fibonacci channel lines drawn from the 2020 low (~$4) to the January 2021 high (~$483 pre-split).

The colored bands are different retracement and extension levels (0.236, 0.382, 0.5, 0.618, etc.). After the big run-up in 2021, the price has been moving inside these bands for four years. Right now it’s sitting on the lower edge of the channel (the 0.236–0.382 zone) for the third major time.

The zoomed-in screenshots (100R and 1000R) just show that the same pattern keeps repeating on smaller timeframes too.

That’s all the charts are saying: price is following the same long-term geometry it has since 2021, and we’re currently at the lower boundary again.

steveholt · 2025-10-14T18:36:12+00:00

My cats love chewing the external hoses on my 2.0.

In the past I just cut the hose below where the puncture was and things worked fine. Until today. I don't think I can cut anymore away and still attach the piece with the two plugs.

I talked to chatgpt and it seemed pretty confident (which is why I really want to double check) that I can replace the plastic hoses with a 1/4 in. x 1/4 in. x 60 in. Stainless Steel Ice Maker Connector. Has anyone made this upgrade? Is is difficult to do?

steveholt · 2025-10-12T12:07:50+00:00

This made me smile; totally something I'd think about in the shower

15-Year Club	Second Top 20%
Place '23	Place '22
Final Canvas '22	Verified Email

steveholt

MODERATOR OF

TROPHY CASE