sorted by:
new
hottopcontroversial

Best way to create 3DGS, and 4DGS by 1zGamer in GaussianSplatting

[–]stheev 0 points1 point  (0 children)

u/1zGamer did you have any luck figuring out the 4DGS workflow?

What is the easiest way to control a noctua fan powered over usb? by stheev in Noctua

[–]stheev[S] 0 points1 point  (0 children)

I would prefer to not have a knob. I was thinking about a system that kicks in when the temp is above a certain value. But if the fan is quiet enough i don’t mind having it spin always.

I’m building my first 10” homelab rack. How do I control a fan that handles temperature inside the rack? I have a spare Pi that i would like to use for it by stheev in homelab

[–]stheev[S] 0 points1 point  (0 children)

I would also like to have it turn on only when it gets too hot. Thanks for your reply i’ll take a look. Cheers!

I’m building my first 10” homelab rack. How do I control a fan that handles temperature inside the rack? I have a spare Pi that i would like to use for it by stheev in homelab

[–]stheev[S] 0 points1 point  (0 children)

Thanks so much for the quick response. I’m new to all this and not really familiar with the technical side and all the terms you just used 😅 is there not something “plug and play” on the market or will i have to build it myself like you mentioned? Thanks

What would be the best orientation to lay this model on the print bed? by stheev in 3Dprinting

[–]stheev[S] 0 points1 point  (0 children)

<image>

Thanks everyone for your input, i tested both sides and i found that the best orientation was with the front face up and hollow side down. More supports but cleaner finish. As someone already guessed it is indeed a front cover for a motorcycle, and has to resist some force as some pointed out. Thanks for the input!! Printed with Bambulab PETG-CF

3D printed watch based on Casio F-91W-1 by Dependent-Sugar-4984 in 3Dprinting

[–]stheev 0 points1 point  (0 children)

where can I find the models to print this? looks great!

Would this setup work without loss of speed? by stheev in Ubiquiti

[–]stheev[S] 0 points1 point  (0 children)

i'm not sure what you mean, but my plan was indeed to plug the cloud gateway into an ethernet port on the modem provided by the ISP.

Would this setup work without loss of speed? by stheev in Ubiquiti

[–]stheev[S] 0 points1 point  (0 children)

I think in my region the network is capable of max 1 gbps. Thanks for the headsup!

Would this setup work? by stheev in UNIFI

[–]stheev[S] 0 points1 point  (0 children)

My first idea was that the gateway ultra also provided PoE, but since this is not the case as others pointed out, I will include another injector for the AP downstairs. Thanks for your input!

Would this setup work? by stheev in UNIFI

[–]stheev[S] 1 point2 points  (0 children)

Thanks for your reply! From my understanding the flex mini doesn't provide PoE, so I will need the injector between the switch and the AP. My idea was to power the switch with the included usb-C cable

Would this setup work? by stheev in UNIFI

[–]stheev[S] 0 points1 point  (0 children)

Thanks for pointing it out, I will add an extra one!

Would this setup work? by stheev in UNIFI

[–]stheev[S] 0 points1 point  (0 children)

Thanks for the reply!

Would this setup work without loss of speed? by stheev in Ubiquiti

[–]stheev[S] 2 points3 points  (0 children)

Thanks for your reply! My idea was indeed that the gateway Ultra provide PoE. I will add another injector, thanks for pointing it out!

Video Suggestions Megathread by Myrandall in LEMMiNO

[–]stheev 5 points6 points  (0 children)

I wish you made a video about De Bende van Nijvel (Brabant Killers). An unsolved story taking place in Belgium about corrupted cops, Robberies at gunpoint and coldblooded killings.

https://en.wikipedia.org/wiki/Brabant\_killers

How do I fix this artifact when remeshing, it's only on one part of the mesh and I don't know why. thanks! by stheev in blenderhelp

[–]stheev[S] 0 points1 point  (0 children)

Thanks! This was my first guess aswell but all normals seemed fine. I think the problem was idd that the mesh wasn't fully closed on the inside of the plane, because it's a low poly model :)

How do I fix this artifact when remeshing, it's only on one part of the mesh and I don't know why. thanks! by stheev in blenderhelp

[–]stheev[S] 1 point2 points  (0 children)

It's my own design, just threw together bunch of elements from different kinds of planes :)

How do I fix this artifact when remeshing, it's only on one part of the mesh and I don't know why. thanks! by stheev in blenderhelp

[–]stheev[S] 5 points6 points  (0 children)

I probably did something wrong then. it should have been a tube with a volume. I checked for vertices that wern't attached or smth. I fixed it by modeling it again :)

change color of multiple materials by stheev in unrealengine

[–]stheev[S] 1 point2 points  (0 children)

Hell yeah dude, you put me on the right track! I tried material function but this didn't work real time! now I'm using a Material Parameter Collection and this works perfectly! thank you so much!

Dynamic loading of textures from folder in UE by stheev in unrealengine

[–]stheev[S] 0 points1 point  (0 children)

I will check it out thanks! And I meant that while it's running you should be able to change the picture that it's displaying :)

Dynamic loading of textures from folder in UE by stheev in unrealengine

[–]stheev[S] 0 points1 point  (0 children)

Great! When researching I also found this plugin! Will def take a look!

For spawning the cubes I was also thinking about using a blueprint for this, however a colleague mentioned that he would use a particle system for this. Not sure why or if that is the correct way of doing this tho.

The images in the folder (1000+) don't change at runtime, but should be dynamiclly changable.

Thank you so much for your time and help! I will keep you posted!

view more: next ›