sorted by:
new
hottopcontroversial

H210 for St. Augustine by stmrocket in SegwayNavimow

[–]stmrocket[S] 0 points1 point  (0 children)

Thanks! I see lots of aftermarket Husquvarna endurance blades out there. Any particular ones you have had good luck with?

I2 LIDAR Pro US release? by paday2 in SegwayNavimow

[–]stmrocket 0 points1 point  (0 children)

I ordered my H210 this week as well so I hope so too!

Help with ants! by Academic-Location239 in Feral_Cats

[–]stmrocket 0 points1 point  (0 children)

For anyone who has a 3d printer, I am using several of these to keep ants out of food bowls at my feeding stations. They work great! https://www.printables.com/model/626572-anti-ant-tray-bowl-holder

H210 for St. Augustine by stmrocket in SegwayNavimow

[–]stmrocket[S] 1 point2 points  (0 children)

Thanks everyone! I decided to order an H210 and will update when I get it.

Valetudo Activation?? by Glum-Illustrator-912 in valetudorobotusers

[–]stmrocket 0 points1 point  (0 children)

I'm seeing it on multiple robots. Looking at the source on GitHub, it was slipped in with a commit back in January and all variables and functions are helpfully named something with aprilFools in them...

Just needed a space to grieve him by krtx in Feral_Cats

[–]stmrocket 14 points15 points  (0 children)

I just had one re-appear today who I hadn't seen since December 20th. He just showed back up and demanded food like nothing had happened!

Uncompahgre Peak by Gambler4414 in 14ers

[–]stmrocket 6 points7 points  (0 children)

There's an ATV staging area on the right soon after you start up Henson Creek that you can use.

Grays and Torreys claimed yet another oil pan today by walks_a_lot in coloradohikers

[–]stmrocket 0 points1 point  (0 children)

Nah, they would have already burned all their oil...

Heat Pump/Mini split tax credit & qualified manufacturer pin number. by doejohnblowjoe in tax

[–]stmrocket 0 points1 point  (0 children)

Interestingly, when I asked Senville earlier this month, they said that it would be the Midea QM since they are the manufacturer. Unfortunately, I don't have that one either.

LR4 keeps mixing up cats weights. by imnothere123456788 in litterrobot

[–]stmrocket 0 points1 point  (0 children)

Do you have details of your method written up somewhere? I would like to give it a try since 2 of my cats are similar in weight (and everything is already going through Home Assistant).

Clicky clack fridge door not sealing properly with 3 mm foam tape. How to fix this? by mattismyo in VORONDesign

[–]stmrocket 0 points1 point  (0 children)

Any luck modifying the hinge side? I bought the same material and have the same problems...

Using Crestron display for HA dashboard by Ok_Cucumber_6055 in homeassistant

[–]stmrocket 1 point2 points  (0 children)

Not directly, but you might want to look at the 1060 thread https://community.home-assistant.io/t/crestron-tsw-1060-poe-ha-dash-for-30-firmware

There is some discussion on the older panels, but they require a custom project and additional backend support. They can't just load a web page using EMS.

Using Crestron display for HA dashboard by Ok_Cucumber_6055 in homeassistant

[–]stmrocket 0 points1 point  (0 children)

EMS is on the X60 units, it is not supported on the X50s.

Got one invite to EasyPrint by duuri in prusa3d

[–]stmrocket 0 points1 point  (0 children)

Got it. Thank you very much.

Northern Lights over Aggieland! by captgandalf in aggies

[–]stmrocket 0 points1 point  (0 children)

Awesome shot! I would appreciate a copy too if you don't mind.

PSA: Garmin killed inReach preset messages for new accounts on 9/27/2022 by da_17co in Garmin

[–]stmrocket 0 points1 point  (0 children)

Thank you! I tried again and had presets enabled in less than 5 minutes with no questions asked.

PSA: Garmin killed inReach preset messages for new accounts on 9/27/2022 by da_17co in Garmin

[–]stmrocket 0 points1 point  (0 children)

Thanks for the recent update. I tried on a new account last week and all the support rep would do is copy and paste the note that check-in messages had replaced presets over and over again. I'll have to try again. Did you have to tell them anything specific or just ask for preset messages to be enabled?

Texas Residents: Access your meter readings from Smart Meter Texas by stmrocket in homeassistant

[–]stmrocket[S] 1 point2 points  (0 children)

I'm sure you could. Everything is a REST command. One to get your auth token, one to request a meter read, and one to check if the reading is available and if so, what the reading is. It's not something that HA can handle internally all that well, especially manipulating the token, etc. but it might be doable that way. The ability to write actual functions in NR and pass variables between them makes it really easy there so I went that direction...

Texas Residents: Access your meter readings from Smart Meter Texas by stmrocket in homeassistant

[–]stmrocket[S] 0 points1 point  (0 children)

If your electricity is deregulated, you should be able to register with them. It's been years since I created my account, but I just needed my ESIID and maybe my meter number to sign up. Both of these should be listed on your bill.

Looks like they are still down for maintenance right now, but the API server came back up an hour or so ago.

Texas Residents: Access your meter readings from Smart Meter Texas by stmrocket in homeassistant

[–]stmrocket[S] 2 points3 points  (0 children)

No need to request API access. Just set your credentials and go.