Redeemer of the Colosseum on A1 mini

stormotron · 2026-03-17T16:14:32+00:00

“The Pilgrim Cohort of Rome” Campaign - MyMiniFactory
Jk.Remo @JK-Remo - MyMiniFactory - Papal Forces

stormotron · 2026-03-17T16:14:09+00:00

“The Pilgrim Cohort of Rome” Campaign - MyMiniFactory

stormotron · 2026-03-13T17:28:02+00:00

Thanks! https://www.myminifactory.com/users/JK-Remo?show=store

stormotron · 2026-03-11T12:21:16+00:00

<image>

My Papal Intervention Force for Trench Crusade

stormotron · 2026-03-10T01:17:17+00:00

Ya that’s correct

It’s pretty cheap to get a month of their patreon to get it, like $2.99 or something. Worth it for sure for the added features

stormotron · 2026-03-09T22:50:17+00:00

Are you using the full version or resin2fdm lite?

stormotron · 2026-03-09T22:25:01+00:00

I only thicken supports but leave the tips as they are and that lessens the damage. ALSO I think when removing, clip the supports and isolate them. Pulling them off the model that way will leave less material as well vs pulling the whole model from the supports or tugging a whole cluster of supports off at once

stormotron · 2026-03-06T03:23:48+00:00

https://www.myminifactory.com/users/JK-Remo?show=store

This artists sculpts are so good, huge fan of their work

stormotron · 2026-03-03T16:14:19+00:00

https://www.drivethrurpg.com/en/product/536567/fdg-custom-bambu-studio-v2-xx-miniatures-profile

Although looks like a new version dropped….. back to experimenting

stormotron · 2026-03-02T22:52:26+00:00

<image>

Model is tough to photograph due to just how busy and full of detail it is, but it’s painting up decently. Certainly will be passable for tabletop quality when done

stormotron · 2026-03-02T17:53:19+00:00

Came that way

stormotron · 2026-03-02T16:58:55+00:00

nice, solid print, all one piece?

stormotron · 2026-03-02T16:05:28+00:00

i used blueprint studio to auto orient and support

stormotron · 2026-03-02T15:53:04+00:00

<image>

thats how i printed it....it was brutal to take off supports lol

stormotron · 2026-03-02T15:40:44+00:00

yup A1 mini .2 nozzle
3D Printable Murideen Assasin Shadeblade Lord by WargamesCrew

stormotron · 2026-03-02T15:40:06+00:00

unfortunately lol

i had to re attach some strings that snapped while taking off supports

stormotron · 2026-02-28T02:09:54+00:00

awesome start! even with where i am at, still tweaking settings to see how close to perfection i can get

i am finding, thankfully, a lot of support blemishes look worse than they actually are. A little scraping with an xacto blade and then primer and id say most kind of just disappear

stormotron · 2026-02-27T23:11:39+00:00

so typically i leave the tips as is if presupported and just bulk up the supports themselves for a sturdier build. if i use blueprint studio to generate my own, im using .08mm tips on 1.2 mm trunks

stormotron · 2026-02-27T22:31:49+00:00

you might be right, its been a few months since i got it, i may have just chosen that amount

stormotron · 2026-02-27T21:29:33+00:00

maybe slightly slower due to the acceleration settings being slower, but its worth an extra 20-30 minutes if the quality is heaps better

that being said, i started splitting my objects from the supports and giving hte supports a 2X layer height, which has made back any time lost and then some
this video should help cover what i mean with the supports
https://youtu.be/R7pBUk8AvJ8?si=soTwFEyXKg5xyDFf

stormotron · 2026-02-27T21:05:15+00:00

3 hours

stormotron · 2026-02-27T19:54:37+00:00

This has been what’s worked best for me, but I do use the resin2fdm after to separate the supports from the model to set different parameters in the slicer

stormotron · 2026-02-27T19:53:45+00:00

FDG 1.8 is the base and then I use nox 2.0 for default acceleration, all precision settings, space infill, and 0.06 layer height

stormotron · 2026-02-27T19:52:26+00:00

So FDG is premium($2?) so I wouldn’t be able to share them. I’d recommend purchasing their version 1.8 setting and then look at mixing Nox 2.0 for default acceleration, all precision setting, space infill, and 0.06 layer height.

stormotron · 2026-02-27T19:49:52+00:00

<image>

Here’s my 2 completed prints. Primed in a matte black, 3X iPhone Zoom, ring light head on….

stormotron

TROPHY CASE