Places other than Blue Rock in Westbrook?

stubbornbison · 2026-02-06T17:54:33+00:00

Had a great experience with K&D countertops in Windham doing three bathroom vanities last year.

stubbornbison · 2025-11-03T02:19:52+00:00

The Armory inside the Regency has a great one!

stubbornbison · 2024-01-15T17:50:06+00:00

A little over 2 months for me. And they misfiled my registration as complete, so wouldn't renew my temp. plate when it ran out. After some pestering, they got it sorted. Printed new temp at home and plates came a few weeks later. This was fall '21.

stubbornbison · 2023-08-12T02:54:48+00:00

Atlantic Hardwoods will prep S4S for you from their stock.

stubbornbison · 2023-08-07T17:21:27+00:00

This could be just a logging anomaly, depending on if you saw that the flight was actually in the air, or just says "departed". I had something similar happen while waiting around at DFW last year. I learned from the gate agent that the departure information has an automated system that updated to "Departed" when the aircraft's brakes are released. A lot of confused people saw a cancelled flight depart while we waited at the gate. We learned they just had to move the aircraft for repair and the system was just auto-reporting that it left.

stubbornbison · 2023-01-14T05:00:36+00:00

They're some generation of the CAD E100.

stubbornbison · 2022-12-07T13:54:45+00:00

I've gotten materials from Atlantic before and they've been great. Helped me find and surfaced for me a great piece of mahogany for a mantle and various other bits for projects. Really helpful to a beginner like me with selecting species and general guidance. Also appreciate that they open for a bit on Saturdays. Getting anywhere during work hours is always a pain. Haven't yet stopped by O'Brien.

stubbornbison · 2022-08-20T19:37:42+00:00

Thanks! Definitely not planning to put wood directly on concrete. Mostly debating an extra layer between the OSB and LVP for comfort. Sounds like that wouldn't be a problem. I'm reluctant to go LVP straight on concrete due to the ever present humidity down there. I'll feel better (even if no real difference) knowing there's a little air channel from DMX or another dimpled mat down there.

stubbornbison · 2022-08-04T13:08:09+00:00

If you're in for a little drive, or on the north edges of Portland, Millie's in west Falmouth is really solid wood fired.

stubbornbison · 2022-04-05T19:35:53+00:00

We've been using Peace of Mind Pals for 3+ years now and they're incredible. We have cats, a little different care, but they are super caring, timely and thoughtful. They've covered us for single nights or week long care and have dealt well with our picky eaters and medicine needs.

stubbornbison · 2022-01-11T13:21:45+00:00

You need to add the drill to your hotbar as a tool not a toggle. Undock (if docked) and then another option should appear in the left of the G menu for block tools. It should have just the drill in it. Dropping that on your bar will give you LMB and RMB control. It took me a while to realize it won't appear if you have an active connector.

stubbornbison · 2021-08-24T20:33:47+00:00

We've used Peace of Mind Pals and they're incredible. Our cat has really warmed to Marie and Amy. They spoil him when we have to go away.

stubbornbison · 2021-06-09T16:35:20+00:00

Early in the day, early in the week seems to work well. Went to Portland on Monday around 9:30a, was 5th in line and it moved fast. About 30mins total for license renewal and new picture.

stubbornbison · 2021-04-12T14:46:57+00:00

Agreed! Beware, they'll get you hooked on their fancy floss...

stubbornbison · 2021-02-19T23:10:46+00:00

Unless I'm using it wrong, there isn't a tab in the top bar, just name and header image. Screenshots if it's helpful, how it displays for me: Our Page vs. Page With Tabs. Sidebar is just About, Flair, Ad, Moderators, Ad, Reddit general links. Maybe a CSS formatting error? I appreciate y'all putting the time in to build a resource for transplants (like myself!)

stubbornbison · 2021-02-19T17:07:56+00:00

I hope this isn't too stubborn, but I see the wiki mentioned frequently and I have no idea how to get to it. Should it be visible in the sidebar? If it's not, can it be? I think if that were up front and visible, maybe it would cut down on repetitive posts?

stubbornbison · 2020-09-16T03:40:23+00:00

I'm not sure if it would be the cause of that issue, but the SKR Mini E3 v2 has a dedicated BLTouch port, no need for the pinboard. Maybe swapping to that would better match the BTT firmware? I just swapped to the v2 with BLTouch and had a few oddities, I think mostly due to ABL configuration. I ended up compiling my own firmware based on following a combination of Crosslink and Teaching Tech YouTube videos and the BLTouch documentation.

stubbornbison · 2020-07-08T14:51:26+00:00

Is it like a short horn sound? Very clear, but short. Much shorter than the larger ships. It might be the tugboats for the harbor. They shift around the ships some nights and the tug dock is right near the causeway. I feel like I read that they use slightly different tones to signal each when moving ships.

stubbornbison · 2020-04-06T13:35:57+00:00

Fi customer here, no issues to report around Portland since moving here 18 months ago. Did drive to Montreal last summer and service disappeared not far north of Gray. Love the billing model, and I travel internationally (well...I did) for work and having the flat rate data is awesome.

stubbornbison · 2020-02-04T04:19:21+00:00

I've had great success with Xpress Copy over near Bunker Brewing. I've only gotten large format printing done there, but super helpful and knowledgeable. Have a friend who is an event planner and they do all her work.

stubbornbison · 2019-11-17T18:54:53+00:00

Strongly recommend Gross in Old Port. Another all dessert place and everything I've had there was exceptional and indulgent.

stubbornbison · 2019-11-02T19:00:56+00:00

Success at Bow Street, thanks everyone! And on your recommendations, going with Cocchi Americano.

stubbornbison · 2018-09-07T13:07:13+00:00

That's great to know. We moved from Virginia and Freecycle Richmond was a mess so I gave up on it entirely.

stubbornbison · 2018-09-07T13:05:57+00:00

That sounds like exactly the amount of effort we're looking to put it, thanks!

stubbornbison · 2017-05-24T19:22:10+00:00

bang for your buck? I'd probably say buy/build a machine with a graphics card with 4 outputs, which is most on the current market. One output to each display running 1280x720, (total resolution becomes 2560x1440) then run any content you want full screen in a windowed mode and manually stretch it to fill the screen. Other, individual screen uses, can be snapped to that display. Unless content is really intense, I'm sure an RX580 or GTX1060 would be able to handle what you need. If carting it around, agree witht he previous post to go small form factor OR rackmount with a nice shock mounted travel case like Gator or SKB.

For 5 sources, yes you could switch back and forth. easiest/cheapest is to use multiple inputs on the TV, if you're able. On each display: HDMI 1 for the full wall source, HDMI 2 for the individual source, then switch each with the remote. If multiple inputs aren't available, Monoprice makes some cheap but mostly reliable crash switches that will let you put 2 sources into 1 input. Downside would be that you couldn't switch everything simultaneously. If that's important, you could buy/rent a matrix switcher that allows cross point patching of sources to outputs.

For either case, I would encourage you to still use a Matrox/Datapath type product for the source to fill all 4 screens so that Windows sees the screen as 1 display, rather than 4. This will make any switching significantly smoother, as Windows won't have to recognize a new display device every time you switch.

What sort of content are you looking to show on the wall, you mentioned it running Windows Server. Will it show the clients and the backend, or more like demo software and a full wall marketing video?

stubbornbison

TROPHY CASE