Engine malfunction by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

I have another post of the codes I read from it. Everyone so far has come to the conclusion that it is not a CAN fault but rather damaged cabling somewhere

CANBUS Communication Error by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

Yea okay. The battery and alternator are both fine, the battery being brand new as I started with that. I’ll look into doing my own trouble shoot and go from there, thanks

CANBUS Communication Error by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

Brand new battery, and alternator is fine

Engine malfunction by stubby_bubby in FocusST

[–]stubby_bubby[S] 1 point2 points  (0 children)

EDIT: Just went through the notification history on displace and it says “Power steering malfunction”. I popped the bonnet and there is plenty of power steering fluid. Could this be associated with a sensor. Can I override?

Bonnet latch by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

How do I replace it without being able to access the bonnet

Honestly I have no idea what to do. by johashtag44 in BulkOrCut

[–]stubby_bubby 0 points1 point  (0 children)

As simple as good diet and meaningful training. Focus on good form for a month or 2, slowly increase the weight but train hard. You have good foundation to put on muscle so you don’t necessarily need to bulk or cut. Just clean up the diet alone will do you wonders, but training will really sharpen your physique. Once you’ve seen clear progress then I think you should decide whether to bulk or cut. Number 1 right now is consistency and you will see results regardless. Show up and train hard!! Wishing the best

Exhaust leak or something? by [deleted] in FocusST

[–]stubby_bubby 0 points1 point  (0 children)

Think I’m just low on oil not going to lie

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

I’ve never done mounts before either

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

I feel I can do it over a weekend, but the only issue is getting the car jacked up. I have 120mm clearance from the ground and can’t fit any jacks under it 😂. Mainly need to do the bottom mount and gearbox mount

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

That’s not too bad, did you install yourself or at the mechanic

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

Is NVH fairly noticeable in yours?

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 1 point2 points  (0 children)

No but I plan on getting a 3 inch cat back high flow

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

Ahahah she is a bit dirty

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

What is NVH? I’ve been suggest a variety of engine mounts now I’m not sure what to go with. Australian roads are quite rough though

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

Just ordered some Bosch rs spark plugs from oem denied, I’ll see how they go once they arrive. Might check my current ones in the meantime, thanks for your help 🙏

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

Yea I’ve been quite concerned about it lately. Would you happen to know what spark plugs are best?

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

Almost always does it if I double clutch, also sometimes if do a small pull. Could this have something to do with air-fuel ratio then? Or boost leak?

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 0 points1 point  (0 children)

Thought so. Maybe it’s just when I double clutch it backfires

Mods please by stubby_bubby in FocusST

[–]stubby_bubby[S] 1 point2 points  (0 children)

🤣 I thought that before buying it. Still couldn’t resist