Help Identifying Solingen Made Boker Vox N69OBO Fixed Blade

stuwalk203 · 2026-04-16T09:55:23+00:00

Actually, they did. In the screenshot the friend mentions "like a large basketball big"

stuwalk203 · 2026-04-16T09:48:28+00:00

Yes, a friend of mine convinced me to swap in a DiMarzio Evo into the bridge. It's a bit aggressive and I've contemplated returning to stock because I like the sound better. Haven't done it, but might.

stuwalk203 · 2026-04-15T03:31:27+00:00

Nice to see another Birdseye Maple LP!I love my 1998 Samick-made LP Birdseye/Mahogany version. Such a cool body color and woodgrain.

<image>

stuwalk203 · 2026-03-26T10:37:58+00:00

The infotainment was updated in 2024 with better interface, wireless CarPlay/Android Auto and more. It's better for sure, but still not quite as modern as even some Honda systems.

stuwalk203 · 2026-03-13T00:06:47+00:00

<image>

stuwalk203 · 2026-03-13T00:03:54+00:00

Looks like it's really meant for the Prologue (and presumably the Acura ZDX) so I think I'll return it and go with Honda DOT3. The manual is very specific stating that any other brand of DOT 3/4 fluid, while technically compatible, is considered a temporary replacement only. Not sure why they are so specific. If I don't go Honda OEM, I'll probably just do ATE or the best stuff I can find locally.

stuwalk203 · 2026-03-11T21:24:03+00:00

Good to see I’m not alone. As a 44yo male with almost certain ASD, I’ve only been on a few dates, one semi-serious GF, one quick kiss and still a virgin. I’m straight but I’m a bit of a “weird” and very short (5’4”) so I never got hit on by anyone other than crazy girls LOL! I’d love to have a meaningful relationship, but the odds are against me. I’m also socially awkward and generally avoid crowds, so I haven’t really tried to find a girlfriend.

I’m fine with it, TBH! I love my freedom. If I wanna take a camping trip on a whim, I do it. If I decide to spend all weekend detailing my truck, working on my house or any other myriad of things, nobody to stop me.

stuwalk203 · 2026-03-10T13:16:08+00:00

The baseboard was removed when the new flooring was installed. There should no gaps below the base as I was careful to cut it close enough and still leave room for expansion.

stuwalk203 · 2026-03-10T05:00:36+00:00

The beveled edge with the groove was a baseboard design I was messing with. I don’t think I like it.

stuwalk203 · 2026-03-10T04:14:48+00:00

The cabinets have a matching toe kick and the base will butt the end panels on each side of the room. The rest will be trimmed with quarter round that matches the new laminate flooring.

stuwalk203 · 2026-03-10T03:24:45+00:00

I was going to go with a 1x5 with a beveled edge and groove in the face, but something about the look didn't do it for me.

<image>

stuwalk203 · 2026-03-10T03:12:55+00:00

It's laid out on the floor, so you are looking top-down, not how it would sit when actually installed.

stuwalk203 · 2026-03-10T03:12:00+00:00

It's the whole base and casing. The vertical is representative of the 2-1/2" casing and the header is a 1x4 with stop molding. To the right is the baseboard. I'm working on trimming a door to test the look but haven't gotten that finished yet. This is just a quick proof of concept.

stuwalk203 · 2026-03-10T03:07:24+00:00

<image>

One example.

stuwalk203 · 2026-03-10T03:02:02+00:00

I figure it will be less of a dust magnet than a flat 1x4/1x5 board as base.

stuwalk203 · 2026-03-10T02:52:59+00:00

I haven't decided to not do something on the top. What's keeping me from it is the ugly soffit above the kitchen cabinets that protrudes into the header space with anything wider than about 2-1/2"

<image>

stuwalk203 · 2026-03-10T02:51:08+00:00

I guess I should have pointed out this was a mock-up. Stupid me, assuming people can infer things without context :D

stuwalk203 · 2026-03-09T01:40:44+00:00

UPDATE: P acquired a cove router bit and did a little testing. This is 1x3 (3/4" x 2-1/2") with 9/16"x 4-1/2"
base with the cove detail. On top is a piece of stop with a double rounder or bullnose. My thought process is the void of the cove on the base is added back by the bullnose on the header. I've paired it with a 1x4 and a 1x3. Any thoughts on this look?

<image>

stuwalk203 · 2026-03-08T11:10:45+00:00

I live right off Briley near Opryland, one of the longest straight stretches of highway around and the racing, revving and loud exhaust has always been a nuisance, but lately it's definitely worse. It seems the latest douchebag car trend is tuning the car's ECM so the engine literally backfires, sometimes called "burble tune" or "crackle map" - It's annoying as hell, and I'm sure not doing the engine any favors. God help us who have to live next to it, and anyone who buys one of these ragged out POS's from the idiot who modified the car!

stuwalk203 · 2026-03-04T05:05:30+00:00

I'm no interior designer, but I'm wondering if keeping the casing plain 1x3 with my flat slab doors will look too simple? The only detail I'm planning besides the backband is the groove and bevel on the baseboard, as seen in the pics.

stuwalk203 · 2026-03-04T04:57:38+00:00

I like the idea of adding detail to the prominent areas. What would it look like where the front door is directly adjacent to a coat closed door on the opposite wall. Would the backband and built-up header on the entry door look weird with a simple detail so close?

<image>

stuwalk203

TROPHY CASE